E EmanP Private Full Member Minuteman Supporter May 7, 2005 1,551 317 WA Jul 20, 2018 #1 Jul 20, 2018 #1 So I got a 20MOA Nightforce magmount but there is no indication on it to tell you which direction to mount it. I also don't have any tools to tell me which way the taper goes. Anyone know for sure which way?
So I got a 20MOA Nightforce magmount but there is no indication on it to tell you which direction to mount it. I also don't have any tools to tell me which way the taper goes. Anyone know for sure which way?
BigTex Dr. Dickweed Full Member Minuteman Jul 14, 2013 1,357 3,440 Jul 21, 2018 #2 Jul 21, 2018 #2 One end should be thicker than the other. The thicker end goes toward the rear. The 1/2" nuts go to the left. Last edited: Jul 21, 2018 Reactions: EmanP
One end should be thicker than the other. The thicker end goes toward the rear. The 1/2" nuts go to the left.
S SLG Gunny Sergeant Full Member Minuteman Sep 2, 2009 844 361 Jul 21, 2018 #3 Jul 21, 2018 #3 Travclem is correct.
E EmanP Private Full Member Minuteman Supporter May 7, 2005 1,551 317 WA Jul 21, 2018 #4 Jul 21, 2018 #4 Like I said, I don't the tools to tell which way the taper goes, which end is thicker.
Spblademaker Don’t tell my wife Full Member Minuteman Oct 24, 2017 3,827 8,758 ravenpointgroup.com Jul 21, 2018 #5 Jul 21, 2018 #5 Use an adjustable wrench as a gauge. . Or those silly things called rulers.
E EmanP Private Full Member Minuteman Supporter May 7, 2005 1,551 317 WA Jul 21, 2018 #6 Jul 21, 2018 #6 You're measuring a difference of something like. 040 of an inch, I don't think that's gonna cut it. Last edited: Jul 21, 2018
S SLG Gunny Sergeant Full Member Minuteman Sep 2, 2009 844 361 Jul 21, 2018 #7 Jul 21, 2018 #7 The 1/2" nuts go on the left side of the receiver. Reactions: deersniper and EmanP
S Stoweit Supporter Supporter Full Member Minuteman Supporter Jun 19, 2017 963 480 New England Jul 21, 2018 #8 Jul 21, 2018 #8 SLG said: The 1/2" nuts go on the left side of the receiver. Click to expand... This
