Photos Multi-Caliber System

I don't know about a "few" seconds, but I did time myself and got it down to under a minute if I have the tools layed out on the bench when I start. They're not joking about holding POI though.

Is that holding poi between switching from say 308 to 338 meaning both barrels zero are guaranteed to be .1 mil of each other ? Or just that when you put the 308 barrel back on after taking it off it .1 mil or less?
 
Is that holding poi between switching from say 308 to 338 meaning both barrels zero are guaranteed to be .1 mil of each other ? Or just that when you put the 308 barrel back on after taking it off it .1 mil or less?
It will repeat between different caliber barrel swaps as well. I bought a TT for mine because I thought that I'd be re-zeroing every barrel swap. You don't need it.
 
  • Like
Reactions: Huskydriver
It will repeat between different caliber barrel swaps as well. I bought a TT for mine because I thought that I'd be re-zeroing every barrel swap. You don't need it.

Nice my axmc is always .1 returning to zero within the same barrel but not between calibers so that is impressive
 
  • Like
Reactions: MACHTECH
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.