I've been slowly working my way up to this with the help of wroscoe and all the other smiths here on the hide who have been a wealth of information through their videos and PM's. I've put together some spare parts rifles already, but this was my first ground up attempt. A long weekend in the shop and here's the results.
Specs are:
Surgeon 591 repeater action
Krieger barrel 1:8.5 twist #18 Light Varmint 26"
Manners MCS-T stock pillar bedded & floated
Jewell trigger set at 16oz.
Surgeon detachable bottom metal
Muzzle threaded 5/8x24"
Caliber: 260 remington
U.S. Optics SN-3 3.2-17x44mm, GAP IR reticle, 1/10 mil EREK, M1 left hand windeage
Harris S 6x9 bi-pod
Most likely I'll Duracoat the barreled action flat black and put the same stencil pattern as the stock on the scope/rings.
One of these days I'll machine out a proper thread protector, but for now the spare one from the parts bin is enough to protect these...
Range report coming as soon as I can get some ammo loaded and get to the range!
Specs are:
Surgeon 591 repeater action
Krieger barrel 1:8.5 twist #18 Light Varmint 26"
Manners MCS-T stock pillar bedded & floated
Jewell trigger set at 16oz.
Surgeon detachable bottom metal
Muzzle threaded 5/8x24"
Caliber: 260 remington
U.S. Optics SN-3 3.2-17x44mm, GAP IR reticle, 1/10 mil EREK, M1 left hand windeage
Harris S 6x9 bi-pod
Most likely I'll Duracoat the barreled action flat black and put the same stencil pattern as the stock on the scope/rings.
One of these days I'll machine out a proper thread protector, but for now the spare one from the parts bin is enough to protect these...
Range report coming as soon as I can get some ammo loaded and get to the range!