My Magneto Mount: Gen II!

[Tyler Kemp]

This will be a concise rundown of a few function/ease of use changes made to my Magneto Mount. I always try and listen to customers, and in turn optimize my products for them. This has led to several modifications to the design in the spirit of better performance and fast setup.

1) We still waterjet some pieces, and mill from there, but all mating surfaces are now milled for extra smooth and parallel clamping. Before, the "S" piece was waterjet cut then had slots milled in it. This is now purely milled, and man is it SLICK! The small kerf on the "S" previously made things clamp down just a hair off parallel.

2) All bolts on the assembly now tighten from the same side. With the Gen I mount, one of the "S" piece bolts had to be given the reacharound. Depending on the setup, this might have been no big deal, but it certainly was for some folks, particularly those mounting the assembly on the bottom side of their stock. In all cases things are easier and faster to set up.

3) A stock mount is available now. You can select this an option rather than the rail mount version at no extra charge, or you can buy these stock adapters individually and keep them on your rifle, the Magneto Mount itself attaches via one bolt.

 

[_Windrider_]

so if we have an older version, is there and upgrade parts kit available?

 

[Tyler Kemp]

so if we have an older version, is there and upgrade parts kit available?

If you send me a PM we can get you what you need, yes. It's about half the assembly or so.

 

[_Windrider_]

If you send me a PM we can get you what you need, yes. It's about half the assembly or so.

Thanks. Ill let you know. I just bought one used here on the hide and haven't had a chance to try it out yet. what caught my eye was that you stated in some applications when secured the bayonet isn't parallel. i would be interested in fixing that if it occurs on my setup. i plan on using it Wednesday so ill let you know.

 

[Tyler Kemp]

FYI we might be running a Memorial Day special that includes these

 

[Random_Scrub]

FYI we might be running a Memorial Day special that includes these

Nice.... I was on the fence looking at this earlier.

 

[V-Ref]

Do you have any pictures of any of the generations (in a operating configuration) on a conventional stock (ie Manners T4) vs a chassis.

Pictures detailing the alignment to the bore, and magnetospeed sensor spacing from the bullet path would be even of further value.

 

[ncr92]

3) A stock mount is available now. You can select this an option rather than the rail mount version at no extra charge, or you can buy these stock adapters individually and keep them on your rifle, the Magneto Mount itself attaches via one bolt.

If possible, could you post a picture of your mount fitted to a rifle with the stock adapter and a harris bipod. I've seen the pictures of the adapter on your web site but it's difficult to visualize how it sets up.

 

[Tyler Kemp]

Here ya go!

 

[fxdrider]

FYI we might be running a Memorial Day special that includes these

When will you know? And if you do run the Memorial Day special, when can we get details and order?

Thanks.

 

[Tyler Kemp]

Sales are live now! Prices are already adjusted, no code needed. mkmachining.com and you'll find everything.