My Nucleus action needs a bang-switch

EchoDeltaSierra

EchoDeltaSierra

Slightly above average
Full Member
Minuteman
Jun 1, 2013
578
351
Minnesota
#1
Hey all... build parts are coming together nicely and I now need to decide on a trigger. The "best" trigger I've shot any amount is my Timney 40X triggers installed on the R700 actions in replacement of the stock ones. I currently run a bit over 2 lbs pull weight and don't think I want or need much lighter. This rifle will be my PRS/hunting/field rifle so I want a durable and weather resistant versus a more bench style trigger. I've also done a fair amount of trigger brand reading and have gone through the thread here by people experimenting with triggers on the Nucleus.

That said... my two main questions:

1. Stay with a single stage or switch to a 2-stage? I run two-stage triggers on gas-guns but have never shot a bolt-gun with a 2-stage.

2. What manufacturer? I wanted a Super 700... but... now I'm considering Huber and Bix'n'Andy, but am curious what others might recommend.

Please just don't toss out your favorite brand... this is specifically for a Nucleus; thus should be a low-maintenance durable trigger that matches the quality of the action.

Thanks in advance.
 
  • Like
Reactions: Bloomer518
#4
I also shoot a bix and Andy two stage. The tac sport is a fantastic trigger. You can adjust the pull weights on both the first and second stage as well as the length of travel on the first stage.
 
  • Like
Reactions: Nathan11B
#7
I have a TT Diamond on mine, and really like it. That said, I truly prefer the trigger shoe on the Timney 510/517, and wish that I could get the TT feel with the Timney shoe.
 
#13
I have a bunch of Huber’s and a couple of Timney’s that I bought and a bix as people raved about them; But they’ve all been moved to my least used guns.

It’s funny you’ll see a guy raving about a trigger, especially light ones who will rave about a trigger and then you watch them shoot and they squirm behind the gun trying to find the comfort before pressing.

I’m not saying everyone does this, But dang there sure seems to be a disconnect between mating the finger and the final press for a lot of people.

What I am suggesting is that none of us are going to be truly a good guide for what you will ultimately like. Luckily all the hi triggers carry a pretty good resale value :)
 
#20
Screenshot_20181108-142924_Samsung Internet.jpg
 
#22
For what it's worth, I put a Tubb T7T (2 stage) in my wife's Nucleus and it seems to work as well as the T7T I have in my Mausingfield (which has worked excellent in hunting conditions for 3 years). Expensive but I think they are worth considering if your already considering a Huber.
 
#23
Right now, I've got a CE 2 stage flat shoe on my nucleus, but I ordered a T7T for my John Hancock. I'm excited about trying out the tubb trigger. That's not to say I dislike the CE. It's a nice trigger for the money. I got it on sale for $160 and it's a hell of a trigger for that money.
 
#27
Lonestar1027 said:
I went with the standard height sear.
Click to expand...
Did you measure the distance from the trigger pin to the cocking piece per the sear compatibility table on the TacSport website? On my Nucleus action, the table would indicate a low sear instead of the standard medium sear.

Do you have any cocking on close with the TacSport two stage?
 
#28
Huber triggers don't pass the bump test.

I love my 2 stage Huber on my comp Nuke. It has such a clean break and I believe is does have the best shot timing. Such a very nice trigger, but Hubers don't pass a vigorous bump test.

I chose a Diamond TT for my hunting Nuke. Love it too.

The Huber has a little more cock on close than the Diamond TT in my Nukes.
 
  • Like
Reactions: lawofsavage and BLKWLFK9
#30
ram said:
Did you measure the distance from the trigger pin to the cocking piece per the sear compatibility table on the TacSport website? On my Nucleus action, the table would indicate a low sear instead of the standard medium sear.

Do you have any cocking on close with the TacSport two stage?
Click to expand...

Ram, initially I did not. I was in a rush to get this rifle ready for Gap Grind and just threw it all together(including load development) in about a week. I decided to break it all down again today after you asked the question and measure, and low and behold it looks like a low top sear might actually be better. I'm showing about 4.0mm from top dowel to cocking piece on mine. You? I had no real issues during load development but had light primer strikes on 10% of my shots at the Grind. I'm wondering(hoping) if this is the culprit.
As for the cock on close, there is some but I'm not too worried about it. The action likes to be run quickly, so I hardly notice it. These issues aside, I'm still super pleased with it.
 
#31
Lonestar1027 said:
Ram, initially I did not. I was in a rush to get this rifle ready for Gap Grind and just threw it all together(including load development) in about a week. I decided to break it all down again today after you asked the question and measure, and low and behold it looks like a low top sear might actually be better. I'm showing about 4.0mm from top dowel to cocking piece on mine. You? I had no real issues during load development but had light primer strikes on 10% of my shots at the Grind. I'm wondering(hoping) if this is the culprit.
As for the cock on close, there is some but I'm not too worried about it. The action likes to be run quickly, so I hardly notice it. These issues aside, I'm still super pleased with it.
Click to expand...

Lonestar, thanks for your reply.
I too measured 4.0mm. I,m trying to decide between the TacSport two stage and the TT Diamond Pro.
 
#42
Diver160651 said:
I have a bunch of Huber’s and a couple of Timney’s that I bought and a bix as people raved about them; But they’ve all been moved to my least used guns.

It’s funny you’ll see a guy raving about a trigger, especially light ones who will rave about a trigger and then you watch them shoot and they squirm behind the gun trying to find the comfort before pressing.

I’m not saying everyone does this, But dang there sure seems to be a disconnect between mating the finger and the final press for a lot of people.

What I am suggesting is that none of us are going to be truly a good guide for what you will ultimately like. Luckily all the hi triggers carry a pretty good resale value :)
Click to expand...
What trigger is on your most used gun?
 
#43
I'm running a Huber two stage and I have had zero problems with it. I find that I prefer a 2 stage over a single stage.

I haven't had the chance to try many of the other triggers out there.

I'm sure they are good also. If you can, go to a match and fondle a few of them.
 
#45
MinnesotaMulisha said:
I'm running a Huber two stage and I have had zero problems with it. I find that I prefer a 2 stage over a single stage.

I haven't had the chance to try many of the other triggers out there.

I'm sure they are good also. If you can, go to a match and fondle a few of them.
Click to expand...

BnA tacsport with default sear bar, Calvin Elite 2 stage worked fine on both my nucleus.
 
  • Like
Reactions: BLKWLFK9
#49
EchoDeltaSierra said:
Safety on or off? Also, how old of a model trigger?
Click to expand...
Safety off. This test is just to make sure that if you're carrying the rifle while it's loaded (hunting, at a match while moving during a stage, etc.) and drop it that it won't go off by accident. It also helps to run the bolt aggressively hard several times once you've adjusted your trigger for the same reason, to make sure that if you start running the bolt unexpectedly fast in the heat of the moment at a match or in the field that your gun won't go bang without you touching the trigger.
 
#50
ThePretzel said:
Safety off. This test is just to make sure that if you're carrying the rifle while it's loaded (hunting, at a match while moving during a stage, etc.) and drop it that it won't go off by accident. It also helps to run the bolt aggressively hard several times once you've adjusted your trigger for the same reason, to make sure that if you start running the bolt unexpectedly fast in the heat of the moment at a match or in the field that your gun won't go bang without you touching the trigger.
Click to expand...

I get that part and have years of experience handling firearms in harsh millitary conditions. That said, I’m super mindful of moving any of my bolt guns with safety off and when climbing or doing other more severe activity either open the bolt handle or take the rifle to condition 3.

It’s a fine balance between a field and match trigger, yet precisely what I’m looking for.
 
You must log in or register to reply here.

Similar threads

Rlbol
40x trigger- which one?
Replies
9
Views
507
jbell
jbell
Crypt_keeper
SOLD NIB ARC Nucleus w/ 2 bolts and TT special
Replies
5
Views
557
Crypt_keeper
Crypt_keeper
ArmchairOperator
Kelby Atlas Tactical Issue - Excessive Cock On Close
Replies
1
Views
370
Criver600
Criver600
Newb37752
Two stage vs Single stage on a Dd5v5
Replies
18
Views
545
Newb37752
Newb37752
M
Who's switched to 2 stage triggers?
Replies
77
Views
3K
FNG1001
F
Top Bottom
Back
Home
Forums
Merch
Alerts