Ever since I launch my scope cap design for PVS-30, people have been asking me about making it in other sizes for other scopes. These are selective laser sintered from nylon 12 powder, and for the longest time they are near-sourced due to the cost of the production equipment. Finally decided to bite the bullet and bring the production in-house, which allows me to offer truly customizable sizes with about 1-week turnaround.
There are many scope covers available on the market, most snaps open/close with a spring to provide tension.
This cover took a different approach - An elastic cord is used to keep the cover secure in the open position, and magnets to keep the cap secured at the close position. Easy, one-hand operation without needing to "snap" anything open/close. Folds completely flat when opened to not obstruct your WMLRF and other accessories.
$10 off the regular $89 price, automatically applied in cart. If you have any questions, please don't hesitate to reach out! You can get it at: https://dotechne.com/objective-lens-cover/
There are many scope covers available on the market, most snaps open/close with a spring to provide tension.
This cover took a different approach - An elastic cord is used to keep the cover secure in the open position, and magnets to keep the cap secured at the close position. Easy, one-hand operation without needing to "snap" anything open/close. Folds completely flat when opened to not obstruct your WMLRF and other accessories.
$10 off the regular $89 price, automatically applied in cart. If you have any questions, please don't hesitate to reach out! You can get it at: https://dotechne.com/objective-lens-cover/
Attachments
Last edited:
