Rifle Scopes Need 20 moa base and rings recomendations

[Griffin4590]

new to setting these things up myself so forgive the rookie question. I need a good solid base and some rings for a savage 10. I'd like to spend ball park < 150 but something quality can't be had for that amount I will spend more. I want to do this once.

 

[CSTactical]

Re: Need 20 moa base and rings recomendations

Badger
Seekins
Nightforce
and Leupold MK4 base.

Mike @ CST

 

[MWDG3]

Re: Need 20 moa base and rings recomendations

EGW and Ken Farrell both use oval head screws which act like recoil lugs. A plus in my book.

 

[BoilerUP]

Re: Need 20 moa base and rings recomendations

I have a Weaver Extended Multi-Slot 20MOA base and Burris XTR low rings on my Savage 10FP and 12FV. Maybe not the "best" if you're beating the hell out of your rifle, the combo works very well for my needs.

 

[Ring]

Re: Need 20 moa base and rings recomendations

EGW and Weaver tac. are both great budget bases.. same for burris rings

 

[bear58]

Re: Need 20 moa base and rings recomendations

Check out TPS. About $150 for a set of rings and a base. Less if you go with their alloy aluminum instead of steel. SWFA, Midway, etc. carry them. You won't be disappointed. Of course, if money's not an issue, Badger, Farrell, Leupold, Night Force or Seekins.

 

[dwt]

Re: Need 20 moa base and rings recomendations

EGW's steel base is on the low $$ side,lots of good rings FS on here for alittle less than the going rate,but you have to be QUICK to get them,

 

[Beef82]

Re: Need 20 moa base and rings recomendations

Weaver tac base, TPS steel rings

 

[Tomg]

Re: Need 20 moa base and rings recomendations

I've been using the EGW base and Burris Extreme tactical rings, this is about $100.00 package

 

[mikeylikesit]

Re: Need 20 moa base and rings recomendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tomg</div><div class="ubbcode-body">I've been using the EGW base and Burris Extreme tactical rings, this is about $100.00 package </div></div>

I use this setup on .338LM with no problems. Just don't over torque the ring screws. 15 in/lbs max.

 

[kamonjj]

Re: Need 20 moa base and rings recomendations

I've been patiently waiting for seekins. Everyone says it will be worth the wait.