Need some 223AI loads.

[Moose]

Im running 50gr vmax & H-335 in win and rp hulls.I started out with 24.9grs to FF and groups were 3/8" at 100yds.After FF i ran 24.9,25,and 25.4grs H-335 and groups opened up to over a inch.Im going to bump up on powder some,Any help would be nice.Thank's

 

[TEAMSENDIT]

Re: Need some 223AI loads.

I ran w748 out of mine with the 50gr vmax but I had way more powder than that I think I was using 30gr it was max load but it was accurate and it shot 3650fps without any pressure signs. I am going to run the 75gr amax with varget out of my new one starting with 24gr and going up.

 

[Goin'Hot]

Re: Need some 223AI loads.

What twist is your barrel? You can always try here.

 

[Moose]

Re: Need some 223AI loads.

1&8 rock creek barrel.Im just use to loading the 223 and not going over 25gr H-335.Im going to start bumping up the load a little at a time for the 223AI.Thank's for the link.

 

[JCH]

Re: Need some 223AI loads.

I am around 28 grains of 335 in my 223AI 8 twist but I am running Lapua brass and 55gr NBT.