Suppressors Nevermind
- Thread starter wallace11bravo
- Start date
Re: TAB gear failure
Ok, so when you have a problem witha company...contact them first. If they don't resolve it, THEN post a thread about it. Just posting that you have a problem with a product does not engender the best response from the company (rightfully). Now, I know Tony, and he is a total stand up guy. He will absolutely make things right for you, but you are DEFINITELY not on his favorite persons list right now because you just dumped a bunch of negative feedback on a very popular website without giving him a chance to fix things for you first. Normally, this post would not be too big of a deal, but in light of another recent post, where the OP completely trashed TAB before giving them a chance to respond to his issue, this is coming off very bad. Were I you, I'd probably delete the post till after I got hold of Tony. If not, I'd edit the title so it didn't use the word "failure" because it has yet to be determined if the gear failed because of a product flaw, or an installation flaw, or maybe you just strung some rounds a little too close together. "Failure" is just kind of inflamatory and in the context assumes that your TAB suppressor was defective. I'd say "Have an issue with my TAB Gear" or something like that. Next, I WOULD contact Tony and allow him to try and help you out.
He is a great guy and will go FAR out of his way to ensure that his customers are satisfied.
Ok, so when you have a problem witha company...contact them first. If they don't resolve it, THEN post a thread about it. Just posting that you have a problem with a product does not engender the best response from the company (rightfully). Now, I know Tony, and he is a total stand up guy. He will absolutely make things right for you, but you are DEFINITELY not on his favorite persons list right now because you just dumped a bunch of negative feedback on a very popular website without giving him a chance to fix things for you first. Normally, this post would not be too big of a deal, but in light of another recent post, where the OP completely trashed TAB before giving them a chance to respond to his issue, this is coming off very bad. Were I you, I'd probably delete the post till after I got hold of Tony. If not, I'd edit the title so it didn't use the word "failure" because it has yet to be determined if the gear failed because of a product flaw, or an installation flaw, or maybe you just strung some rounds a little too close together. "Failure" is just kind of inflamatory and in the context assumes that your TAB suppressor was defective. I'd say "Have an issue with my TAB Gear" or something like that. Next, I WOULD contact Tony and allow him to try and help you out.
He is a great guy and will go FAR out of his way to ensure that his customers are satisfied.
Re: TAB gear failure
Ah, I do apologize. Again, not my intention to flame TAB gear or Tony. Also had not seen the trash talking thread, definetly would not have posted this if I had.
I have actually been quite impressed with the performance of the product, I've had it for quite some time and all of my TAB gear has performed VERY well.
Again, I do apologize, I was just trying to share an interesting story. Will change the thread title too.
Ah, I do apologize. Again, not my intention to flame TAB gear or Tony. Also had not seen the trash talking thread, definetly would not have posted this if I had.
I have actually been quite impressed with the performance of the product, I've had it for quite some time and all of my TAB gear has performed VERY well.
Again, I do apologize, I was just trying to share an interesting story. Will change the thread title too.
Re: TAB gear failure
That's what I figured Wallace. You obviously weren't flaming or anything, it is just that, with the other thread, I knew you were going to get a very negative reaction. Also, if you do look at the other thread, there are some very good comments by other TAB users and Tony himself about the usage and expectations for performance of the covers.
That's what I figured Wallace. You obviously weren't flaming or anything, it is just that, with the other thread, I knew you were going to get a very negative reaction. Also, if you do look at the other thread, there are some very good comments by other TAB users and Tony himself about the usage and expectations for performance of the covers.
Re: TAB gear failure
I think that would be a good course of action on my part.Sorry all, my interweb skill/wit is weak.
Edit:
Found the other thread. I feel like an asshat.
I think that would be a good course of action on my part.Sorry all, my interweb skill/wit is weak.
Edit:
Found the other thread. I feel like an asshat.
Re: TAB gear failure
I wasn't up at midnight to see what the problem is, so what ever the problem is either PM me here, or email me at [email protected] and we'll do what you need to make you happy.
Thanks for the support guys.
I wasn't up at midnight to see what the problem is, so what ever the problem is either PM me here, or email me at [email protected] and we'll do what you need to make you happy.
Thanks for the support guys.
