Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Odd, aics mags work fine with my 3 lug aiae. LolMost AICS patterns won’t work with 3 lug actions.
HRD makes 6BR AW kits.
As well as with my 700 clone 3lug action.Odd, aics mags work fine with my 3 lug aiae. Lol
Haha I bet they do!Odd, aics mags work fine with my 3 lug aiae. Lol
Yes your correct they will work with Curtis 3 lug actions,why I said “most”.Curtis has the bottom lugs sitting at about 8&4 o’clock and uses the bolt face rim to strip out rounds,a Gap,badger,AW/T/X etc has the lug sitting down at 6 o’clock for AW mags and an even larger diameter bolt body.As well as with my 700 clone 3lug action.
Lug sitting at 8&4 o'clock would work better with the AW mags. Lug sittings 6 o'clock work better with centerfeed AICS mags.Yes your correct they will work with Curtis 3 lug actions,why I said “most”.Curtis has the bottom lugs sitting at about 8&4 o’clock and uses the bolt face rim to strip out rounds,a Gap,badger,AW/T/X etc has the lug sitting down at 6 o’clock for AW mags and an even larger diameter bolt body.
Cool....Lug sitting at 8&4 o'clock would work better with the AW mags. Lug sittings 6 o'clock work better with centerfeed AICS mags.
I should be home later tn and have a terminus Zeus plus mdt ai mags and mdt ai 6br mags.Just wanted to bump this thread. Everyone is closed right now. Can't make any phone calls! Considering a Terminus Zeus! Any one forsee any problems. I still see MDT has the 3 lug listed as an issue on their website. It would be great if they would clarify which 3 lugs are a problem. I don't see much difference in a termius/curtis comapred to a rem because the lugs are on each side and its the bolt body. Same as a rem 700 i beleive pushing out the round?
Just switched to a Zeus a few months ago and now I’m running a dasher with the same problem. Almost seems like there isn’t enough spring tension in the front half of the mag…do you have any pics or measurements of how much you opened the feed lips to get the dasher to run properly?I have a Vector and Zeus. I was able to get the MDT mags working, but I did have to open the feed lips a lot. The round would feed out of the mag, but run right into barrel and never feed into the chamber.
So long as you don’t mind tinkering with it, try it out. I run the AW mags with the HRD kit for my BR.
How old are your mags? They changed the follower and spring design a little while ago and sent out new followers to anyone who had the mags.Bumping this thread hoping for help.
I have a terminus Zeus and can’t get the MDT br mags to feed properly. The best I’ve gotten is loading the 12 round mag and it will feed fine until I get to #11. That round will nose dive just below the chamber and cause a jam. Round 12 works feeds just fine. It appears there is a lack of spring tension in the front half of the mag which only affects #11 for some reason.