*New Product Release* 7PRC 3-round Polymer Magazine

[MDT_OFFICIAL]

Now available for your CIP inlets, the 7PRC 3-round polymer magazine https://mdttac.com/7prc-mdt-cip-la-polymer-magazine-3-rnd/

 

[DanGroves]

Is there a 300 PRC like this in the works?

 

[4O6shootist]

Says CIP which is 3.850 internal, but it's only 7prc? Should work for any non belted magnum long action case?

 

[MDT_OFFICIAL]

Says CIP which is 3.850 internal, but it's only 7prc? Should work for any non belted magnum long action case?

The way it is designed it will only work with 7PRC however, we do also have a 3 round polymer 300WM and 30-06 magazine

 

[MDT_OFFICIAL]

Is there a 300 PRC like this in the works?

It will not work the 300PRC

 

[Genin]

I have a manners long action Gen 1 mini chassis in my manners stock. Will this work in that?

 

[MDT_OFFICIAL]

I have a manners long action Gen 1 mini chassis in my manners stock. Will this work in that?

As long as it accepts CIP 3.850" length magazines

 

[Mumzergadol]

Mine just showed up. V tight fit into apa bottom metal but they run great and don't rattle. At all

 

[Mumzergadol]

@MDT_OFFICIAL be advised that they are tight enough in that BM that they are pretty awkward to feed and extract. .030 more total clearance in every dimension would be helpful

 

[4O6shootist]

@MDT_OFFICIAL be advised that they are tight enough in that BM that they are pretty awkward to feed and extract. .030 more total clearance in every dimension would be helpful

The poly 3rd aics short action doesn't fit well in a hawkins hunter dbm either. Some sand paper to several locations and all was better.

 

[3 oh 8]

Has anyone run these mags in a XLR Element Mg?

 

[secondofangle2]

Yes the MDT 7PRC is the preferred magazine for XLR 4.0

Search and there is a thread on it with all the options and measurements and comaptibilities

 

[Hi Velocity]

As long as it accepts CIP 3.850" length magazines

Too bad the XRS LA isn't CIP length. Why is that?

 

[MDT_OFFICIAL]

Too bad the XRS LA isn't CIP length. Why is that?

At the moment, we just offer it for the Savage LA inlet. However, we may be looking at offering the CIP inlet for the Remington 700 rifles! Stay tuned!

-Paige

 

[secondofangle2]

Post in thread '7mm PRC'
https://www.snipershide.com/shooting/threads/7mm-prc.7121760/post-11961261