My name finally came to the top of the list, and I bought one of these today......looking for advice on a good scope to punch paper... Custom Shop Edition
[IMG2=JSON]{"alt":"Picture","data-align":"none","data-size":"full","src":"http:\/\/www.anschutznorthamerica.com\/uploads\/1\/9\/9\/7\/19975381\/sw-1_2_orig.jpg"}[/IMG2]
1416 T6 M Custom Shop Model
ANSCHÜTZ 1416 T6M
Starting out with the 1416 HB repeating rifle fitted with the excellent 5098 trigger, we epoxy bed the barreled action into a Manner's T6 stock and then add the extended magazine release, upgraded hex screws, and oversized green or black aluminum bolt knob.
We will be making these in small batches, and because they are Custom Shop models, these can be purchased directly.
Upgrades
- Epoxy bedding with front pillar and rear supporting steel rod.
- Trigger & bolt tune.
- Manners T6 stock.
- Extended magazine release.
- Custom Shop oversized green or black aluminum bolt knob, extended magazine release, hex-keyed action screws.
- Barrel Length: 23" heavy barrel without front dovetail
- Caliber: .22 lr
- Weight: 7 lbs, 7 oz.
- Action: Bolt-action repeater with 5-shot magazine.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Last edited: