Rifle Scopes **NEW USO RINGS**

JBW3

Sergeant
Commercial Supporter
Full Member
Minuteman
These new rings were designed for a special application for use with our SN-4 and SN-12 model scopes. The main idea was to be able to use a single larger width ring so that the scopes can be mounted further forward on the rifle.

Here are some of the specs on the rings;
*1" from top of rail to center line of scope
*6061-T6 construction
*8 8-32, 18-8 SS socket head cap screws for top clamp
*Thread inserts for side clamp bolts, SS
*Type III hard matte black anodized
*1.5" width
*Spring loaded side clamp, SS springs
*4140 side clamp bolts
*Serialized pairs
*Top clamps matched and labled
*Torque specs, 15 top screws, 65 side bolt (INCH POUNDS)

372429876.jpg

372429879.jpg

372429882.jpg

372429885.jpg

372429886.jpg

372429887.jpg

372429890.jpg

372429891.jpg


Price is $120 for single ring, and $220 for a set of two.

Let me know if I left anything out.
John III
 
Re: **NEW USO RINGS**

John, every time I look at that ring I cant help but think how 2 of those rings would be badass on a .50! Then I remember where I live and......well you know.