New X-Ray Chassis from KRG-now shipping!

At this price point, you're competing with a B&C stock with a DBM added. There's no comparison. I have two Howa SAs and an aftermarket stock a weak link. At this price, I could budget one in 2014 and 2015 for what I'd do for one rifle next year. Please try to make the Howa available. I prefer the color of dirt, but I'd paint over a color I didn't like.
 
The FDE version would hit a wider audience in the market. Patriot Brown and Burnt Bronze are popular among a smaller subset of buyers. My experience with Cerakote and polymer frame firearms in the mass market over the past few years tells me consumers tend to gravitate to the more standard colors. We ran a 100 piece exclusive Burnt Bronze Cerakote AR last year, as well as, stocking a standard PB, OD and the FDE Cerakote rifles from the same vendor. Retailers tended to love or hate the Burnt Bronze and were lukewarm on the Browns, but always reordered the FDE. OD was dead last in terms of demand, btw...FDE still has legs.
 
Last edited:
Thanks for the feedback guys. Anyone coming to SHOT, stop on by and get hands on these things. We'll make sure we bring enough to pass around.

Middle Man that's good insight on the color choices. Maybe we need a special FDE run and a super special run in yet another color, haha.

I agree that FDE has been around and popular for awhile but it's a good color. When I built the first Massoud prototype we were getting ready for SHOT and one of the guys was painting the parts and asked what color I wanted. I said "FDE" thinking that it was the cool green color which was actually known as foilage green. There really wasn't much "dark" about FDE but it ended up working out better to have it FDE (which just seemed like tan to me).

Justin
 
Thanks for the feedback guys. Anyone coming to SHOT, stop on by and get hands on these things. We'll make sure we bring enough to pass around.

If there was ever a SHOT show I felt I needed to attend, it's 2014. Sadly, a little thing known as college keeps younger enthusiasts glued to the hide instead of the show floor. As my previous posts here among others say, inlet for a Howa and the precision rifle market may see a shift. The United States lacks any real chassis options for these actions and sending our hard earned cash over to Europe for the Roedale option isn't appealing to me. I would much rather support KRG.
 
SHOT will be there brother. Companies like ours are already thinking of ways to go bigger and better for 2015 SHOT. What I would ask you not to do is do go into debt for one of our chassis, especially as a college student. If you work hard, get through college, then work hard and be successful in your career, you'll be able to put a Whiskey-3 on 5 different rifles if you want and have those crazy new Hensoldts on there too. But...debt is an anchor and it will drag you down so that you never get to even one Whiskey-3 or any high end rifle. You may be smart and know this but since I don't know you personally I wanted to mention it. A wise person once said not to purchase toys or "luxuries" on credit. It took me awhile myself to come around but it's a sound philosophy.

Anyway, after the weekend we're going to try to get you guys a real pic. It honestly won't look much or any different since renderings are pretty good these days but it is good to see the real thing.
Justin
 
Looks like it will be a couple more days for a real pic. Keep the emails and pm's coming if you guys have questions. Probably within a week or two we'll put up the product page on the site with even more details, but most of the stuff we have covered in this thread. We are taking note of the color requests but haven't made a decision. Thanks,
Justin
 
Debt is an anchor, and that's why I went with Howa for my precision rifle. Being a college student with limited time for the range, it is more than acceptable accuracy. Thanks for the wise words. This X-Ray chassis is well within my budget and that is why I have been posting my hopes for the inlet options.

SHOT will be there brother. Companies like ours are already thinking of ways to go bigger and better for 2015 SHOT. What I would ask you not to do is do go into debt for one of our chassis, especially as a college student. If you work hard, get through college, then work hard and be successful in your career, you'll be able to put a Whiskey-3 on 5 different rifles if you want and have those crazy new Hensoldts on there too. But...debt is an anchor and it will drag you down so that you never get to even one Whiskey-3 or any high end rifle. You may be smart and know this but since I don't know you personally I wanted to mention it. A wise person once said not to purchase toys or "luxuries" on credit. It took me awhile myself to come around but it's a sound philosophy.

Anyway, after the weekend we're going to try to get you guys a real pic. It honestly won't look much or any different since renderings are pretty good these days but it is good to see the real thing.
Justin
 
Yeah I appreciate that. I very well might be going this year. I will have to stop by and shake your hand for sure!!

Thanks for all the great equipment!!

Jake Vibbert
JC Steel Targets


Thanks JC! Stop by and see us at SHOT if you go.

Janoski, it's hard to explain, but the bedding area is the stock so to speak. If you have a Sako TRG laying around, check it out as it's the same setup. The full chassis that we make were the evolution of parts we made for the TRG.


Justin
 
Hey guys, no pics until tomorrow eve and they will just be black parts. I know, frowny face.

bribassguy, you can add a rail to the front of the forearm where you'd normally put a bipod at the front or just in front of the magwell like for a tripod, in both positions it's the MOE L2 rail spacing. We're not doing pre-orders on this one really, just a notification list. If we get to the point where the notification list exceeds our first production run then we'll have to look at making it a pre-order list.

D_Lamz, the forend has grooves at the front for a Harris bipod. The grooves keep the bipod from rotating. That's why it's squared off at the front but it's only the first couple inches then after than it is nice an rounded and feels fine in the hand.

Hopefully we can fit the Howa in there (along with the Win/FN, Savage, etc). If not I think we're gonna have to find a way to convert some of you Howa shooters over to Tikkas, haha.
Thanks,
Justin
 
+1 for the howa inlet, but agree with the conversion to tikka. I've loved my howa/B&C combo in .308 as a good intro gun. That being said, with the metric threads in the action it can be challenging to find a smith to screw a new barrel into it. The howa action is amazing but if you plan on re-barreling the tikka seems like the way to go. Look forward to the x-ray for a tikka 6.5 CM build.
 
Pics in original post! These are pre-production so the appearance is slightly different than the full production stocks. When we get full production parts ready we'll get up some hi-res pics from various angles. Thanks guys,
Justin
 
Last edited:
Pics in original post! These are pre-production so the appearance is slightly different than the full production stocks. When we get full production parts ready we'll get up some hi-res pics from various angles. Thanks guys,
Justin

Looks great!!! I may have to buy two of these. Will you be offering the composite front section, only, during the first run? I would love to lighten up my W3 without having to change scopes.
 
Thanks guys. Remember those are just teaser pics, not the real deal.

We're not sure when we'll have just the forend available so guys can put it on the W3. It shouldn't be drastically later than the chassis, probably sometime in the next couple months after SHOT.

The LOP with the regular pad is about 12.8" at the shortest but you could get a thinner pad to go shorter on the LOP. The buttpad pattern is the Rem 700 pattern (for the wood stocks).

Justin
 
Not sure if this has been addressed already but are there any issues with cleaning rod clearance? Taking the cheek piece off seems simple but what about the butt pad? Does its height interfere with cleaning? Is it adjustable for height?

Also, another vote for FDE
 
I really like this stock, except for the two spar transition from the grip to butt stock. If it had the traditional (one large spar) Sako TRG grip/stock style I'd be buying one (possibly more) as soon as they became available.

Will the stock accept the BT21 Atlas rail mount?
 
Hey guys thanks for the comments. Here's some answers-

-The buttpad is height adjustable so you can set it where you need it and move it for cleaning if necessary

-At this point, the forend is as you see it. There are some reasons why it's not more like the TRG that I won't bore you all with

-The m2008/13 uses the forend and trigger guard from a Rem 700 so in theory this is an option but we see the Whiskey-3 as a better fit for a high end custom action.

-the twin spar setup is actually what allows us to get the best ergonomics. When you have a single thick spar up top it cramps your thumb wrapping around like an AICS. When you have a single thick spar on bottom it cramps the base your palm/thumb

-We don't have an exact date on availability, it will be after SHOT sometime. Right now some kind of brown color is planned, whether it's FDE or Patriot Brown or whatever has yet to be decided. These will come after we get the first batch of black ones out.

Keep them coming!
Justin
 
That upper spar for the stock is where I put my thumb, that's why I was asking about a single thicker spar at the bottom, just like the TRG. Boy, if it wasn't for that upper spar, this would be the cats meow for me.

So the BT21 won't work with this stock?
 
So when would we realistically be seeing savage model 10 with bolt release on the underside? If its 8 months out I should probably look elsewhere for my chassis needs, but if not... I could see myself waiting half a year.


You guys have a real winner winner chicken dinner here if you can make them fast enough and in a multitude of actions, success is yours! Take it!
 
Last edited:
Morning fellas. There are two mounting positions for rails on the forend so any rail mounted bipod can be used. The hole spacing is the MOE L2 hole spacing (1.190").

It's too early to say on the Savage/Howa/Win/FN versions as far a timeline. Ideally it would be inside of 8 months but we just don't know.

The forearm is very stiff, the aluminum backbone runs the full length of the forend. Just the polymer forend itself is stiff enough that it could probably be used alone as the front of the chassis.

Justin