hey guys new here and i need some help got a new 700 sps with the new trigger remmy is putting on them i cant seem to get the set screws broke loose just twisting the 1/16 allen wrenches can or would anyone be willing to help me it seems like they are loc tighted from the fac. thanks in advanced jim
-
Having trouble using the site?
Contact support
Gunsmithing newbie got a 700 trigger ?
- Thread starter jimmyrjessie
- Start date
Re: newbie got a 700 trigger ?
Welcome aboard.
My first question: Is this an <span style="text-decoration: underline">adjustable trigger</span> which you have <span style="text-decoration: underline">instructions</span> on how to adjust?
Welcome aboard.
My first question: Is this an <span style="text-decoration: underline">adjustable trigger</span> which you have <span style="text-decoration: underline">instructions</span> on how to adjust?
Re: newbie got a 700 trigger ?
if you mean with the set screw in the upper portion of the trigger no i have to take the barrel/acton out of the stock to adjust this is my yote gun 204 ruger
if you mean with the set screw in the upper portion of the trigger no i have to take the barrel/acton out of the stock to adjust this is my yote gun 204 ruger
Re: newbie got a 700 trigger ?
Well its a new trigger, I'm not familiar with it.
Ide say if its not meant to be adjusted, dont adjust it.
If you dont know how to adjust it, dont adjust it.
If its meant to be adjusted, and you know how to adjust it....
Try applying heat to the set-screw. Hold the tip of a soldering iron on it for a bit (20-30 seconds) then try to loosen it.
Well its a new trigger, I'm not familiar with it.
Ide say if its not meant to be adjusted, dont adjust it.
If you dont know how to adjust it, dont adjust it.
If its meant to be adjusted, and you know how to adjust it....
Try applying heat to the set-screw. Hold the tip of a soldering iron on it for a bit (20-30 seconds) then try to loosen it.
Re: newbie got a 700 trigger ?
The old style had a sealer that acetone would loosen. Some triggers were staked at the screw and impossible to budge without distroying the head or the threads.
Good Luck!
The old style had a sealer that acetone would loosen. Some triggers were staked at the screw and impossible to budge without distroying the head or the threads.
Good Luck!
Re: newbie got a 700 trigger ?
Are you talking about the x-mark? If so, take a pick and pick away the sealant that they use. After that, it should turn freely.
Are you talking about the x-mark? If so, take a pick and pick away the sealant that they use. After that, it should turn freely.
Re: newbie got a 700 trigger ?
small torch, pencil torch ect and apply some heat with it and try it.
Are the threads messed up? Can you tighten it any and then try to back it up?
small torch, pencil torch ect and apply some heat with it and try it.
Are the threads messed up? Can you tighten it any and then try to back it up?
Re: newbie got a 700 trigger ?
negative cant move it at all i was worried about heat on the trigger assy. but may be my only choice.
negative cant move it at all i was worried about heat on the trigger assy. but may be my only choice.
Re: newbie got a 700 trigger ?
your not looking for alot of heat if its the actual thread locker/sealant thats holding the threads. If its a mechanical situation thats it holding...thats a different story
If you have a temperature gun you can keep an eye it with that while heating.
your not looking for alot of heat if its the actual thread locker/sealant thats holding the threads. If its a mechanical situation thats it holding...thats a different story
If you have a temperature gun you can keep an eye it with that while heating.
Similar threads
