• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Rifle Scopes Nightforce Elevation/Windage Question

Tactical30

Gunny Sergeant
Full Member
Minuteman
May 5, 2009
1,098
3
46
Eastern Ohio
I have mounted a Nightforce 3.5-15x50 NXS w/ NP-R1 Reticle on my Warner Tool Build, also with a Badger USMC DMR (1.031") Rings, 20MOA Base, Rem700 L/A .300Win. Mag./ Bartlien 1-10 26" MTU Barrel.

I Have zeroed it @ 100yrds. It will be for Target shooting only @ ranges from 100yrds-1000yrds.

I checked how many minutes of (up) Elevation I have left after zeroing and I have 47 minutes left.

Im wondering if anyone could tell me my max effective range without having to hold over?

Will I be able to get out to 1K no problem?

Im guessing the 208gr. A-MAX (example) is going to use more than 34 MOA to get out to a 1K but that doesnt include whatever windage im going to use.
 
Re: Nightforce Elevation/Windage Question

47 moa elevation is more than enough to get you to 1000yds with a 300 win mag. You'll probably only need around 20 moa for 1000yds but this will depend on your velocity and conditions.
 
Re: Nightforce Elevation/Windage Question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: buffybuster</div><div class="ubbcode-body">Your barrel must be sitting near BDC (barrel droop) as 47moa of total elevation with a 20MOA base isn't much. </div></div>

I thought I would have more Elevation left after zeroing also.

Never heard of BDC/Barrel Droop before.
 
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.