I need one for my rifles. Both have ATACRs on them and both have NF rings. Do you suggest the top ring level from NF or another anti cant device? I have some USO that I don’t care for and will probably post for sale. I like the looks of the Flatline fixed but I am basing this solely on looks, not personal experience.
Rifle Scopes Nightforce level top ring or another anti cant level?
- Thread starter tlsmith22
- Start date
I like to have the separate level so I can level the scope to the rifle when tightening ring caps and then level the level to the reticle by adjusting the level. I like the Flatline models the best but I also have a couple Vortex.
If you like the Flatline, you'll find ours to be all the quality, lighter, and IMO the easiest to install design out there:
Sticks out just enough to be visible, but not snag on things. Price is significantly less, and the pin holds the vial while providing a quick spot to line up the bubble, and the vial is protected.
Sticks out just enough to be visible, but not snag on things. Price is significantly less, and the pin holds the vial while providing a quick spot to line up the bubble, and the vial is protected.
I have the NF ring top level. I found it too close to my eye and difficult to focus on while my cheek was on the stock. I now use an Accuracy First and mount it forward of my elevation knob. For me, much better.
Bang
Bang
I’m gonna give our fellow hide guy, MK Machining, some business. I’m gonna try his anticant. I promised him I would do a full review whether it was good or bad. I like that style best and I was also afraid the NF would be too close.
This is the one I got. MKM low profile. Very easy to install (didn't have to move the scope). Works nicely. I set it up so I can see it in my "non-dominant eye" (left eye).
Attachments
I think I will like that setup. I also think the pin lining up with the bubble will make it was easier to see that you’re level.
How far do you guys shoot to need the level? The furthest I shoot is 900 yds and never bothered with a level. I figure it’s just one more thing to worry with. Basically asking when is it necessary. 900 and in it isn’t. I think I will go ahead and start a thread.
https://mkmachining.com/product/34mm-aluminum-hinged-scope-level/
This is the link to the 34mm for my ATACR.
This is the link to the 34mm for my ATACR.
Similar threads
