Has anyone else had this problem with Magpul P-Mags? It seems like the lips on the mag stick to the round and slow the bolt from chambering a round. Ive got 2 ARs and get the same results. Regular mags work fine. Any help would be appreciated
-
Having trouble using the site?
Contact support
P-Mags wont feed, wtf?
- Thread starter IdahoMike
- Start date
Re: P-Mags wont feed, wtf?
Otis DryLube works for me, but I did that to mine before I even loaded them. Never had a hitch from my even dozen
Otis DryLube works for me, but I did that to mine before I even loaded them. Never had a hitch from my even dozen
Re: P-Mags wont feed, wtf?
Better yet, make sure you dont have 31 rounds in it. Most every pmag I have used will take 31, and this will stop your carrier in its tracks. Try 28 rounds, if it still does it, check your buffer spring next.
Better yet, make sure you dont have 31 rounds in it. Most every pmag I have used will take 31, and this will stop your carrier in its tracks. Try 28 rounds, if it still does it, check your buffer spring next.
Re: P-Mags wont feed, wtf?
they are made to hold 30. if your doing that and still having problems call magpuls customer service and they should replace it.
I'm assuming this only happens with one of their mags.
they are made to hold 30. if your doing that and still having problems call magpuls customer service and they should replace it.
I'm assuming this only happens with one of their mags.
Re: P-Mags wont feed, wtf?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: YourMotherTrebek</div><div class="ubbcode-body">they are made to hold 30. if your doing that and still having problems call magpuls customer service and they should replace </div></div>
+1
The Magpul guys are top notch. I have close to 30 MagPul Pmags and have suffered no failures with them....EVER.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: YourMotherTrebek</div><div class="ubbcode-body">they are made to hold 30. if your doing that and still having problems call magpuls customer service and they should replace </div></div>
+1
The Magpul guys are top notch. I have close to 30 MagPul Pmags and have suffered no failures with them....EVER.
Re: P-Mags wont feed, wtf?
on my ar the mag lips that hold the round were hangin out a lil and grabing the bolt... check that..
on my ar the mag lips that hold the round were hangin out a lil and grabing the bolt... check that..
Re: P-Mags wont feed, wtf?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triad</div><div class="ubbcode-body">Try 28 rounds</div></div>
one would hope a magazine made to hold a given number of rounds would function properly with that many rounds inside it.
if it doesn't, it's not up to the user to under-load it in the hopes it will work. it's up to the company to replace it with a magazine that does what it's supposed to do.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triad</div><div class="ubbcode-body">Try 28 rounds</div></div>
one would hope a magazine made to hold a given number of rounds would function properly with that many rounds inside it.
if it doesn't, it's not up to the user to under-load it in the hopes it will work. it's up to the company to replace it with a magazine that does what it's supposed to do.
Re: P-Mags wont feed, wtf?
they are 20 round mags, I have to slam the forward assist almost every other round I guess I am gonna try some dry lube and see what happens, then call magpul of problems persist. It just seems weird that every one (5) has this problem.
they are 20 round mags, I have to slam the forward assist almost every other round I guess I am gonna try some dry lube and see what happens, then call magpul of problems persist. It just seems weird that every one (5) has this problem.
Re: P-Mags wont feed, wtf?
20 rounders were supposedly having issues. Theres a link about it somewhere on barf.com. I'll see if i can dig it up.
20 rounders were supposedly having issues. Theres a link about it somewhere on barf.com. I'll see if i can dig it up.
Re: P-Mags wont feed, wtf?
the mags are made to function without lube.
If they don't do that have them replaced.
the mags are made to function without lube.
If they don't do that have them replaced.
Re: P-Mags wont feed, wtf?
I have some 20 round Pmags but have not tryed them. My experience is with the 30 rounders.
I still say if you simply pick up the phone and call Magpul they will be more than happy to help. I have met several of those guys over the last year or so and they are customer driven.
Sometimes guys (me included) like to think we can fix anything with lube or a Dremel. Don't waste your time worrying over the issue. Magpul can tell you what the trouble is.
I have some 20 round Pmags but have not tryed them. My experience is with the 30 rounders.
I still say if you simply pick up the phone and call Magpul they will be more than happy to help. I have met several of those guys over the last year or so and they are customer driven.
Sometimes guys (me included) like to think we can fix anything with lube or a Dremel. Don't waste your time worrying over the issue. Magpul can tell you what the trouble is.
Re: P-Mags wont feed, wtf?
Have early and late production 20 round P mags. All perform w/o issue. However, I did replace the buffer spring with a touch stiffer unit. My factory buffer springs were starting to show slight issues prior to changing to P Mags.
Edit: I have one mag that I run with a suppressor for demonstrations. The thing is flat nasty/dry/doesn't run in a couple other AR's due to how dirty it is. Not one hold up since changing springs. Carbon clings to it and the buildup is quite a bit.
Have early and late production 20 round P mags. All perform w/o issue. However, I did replace the buffer spring with a touch stiffer unit. My factory buffer springs were starting to show slight issues prior to changing to P Mags.
Edit: I have one mag that I run with a suppressor for demonstrations. The thing is flat nasty/dry/doesn't run in a couple other AR's due to how dirty it is. Not one hold up since changing springs. Carbon clings to it and the buildup is quite a bit.
Re: P-Mags wont feed, wtf?
I recently picked up some 20rd PMag's and haven't had any issues with them, but i haven't used them a lot yet either. Like lots of others suggested, contact Magpul. I think they will take care of you.
I recently picked up some 20rd PMag's and haven't had any issues with them, but i haven't used them a lot yet either. Like lots of others suggested, contact Magpul. I think they will take care of you.
Re: P-Mags wont feed, wtf?
IdahoMike, I am sorry to hear you are having issues with your PMAG 20's. No lube or down loading should be necessary for them to function. If there is still a problem please send me a PM with background info I will make sure you are taken care of.
Regards,
Eric
Magpul Industries Corp.
R&D
IdahoMike, I am sorry to hear you are having issues with your PMAG 20's. No lube or down loading should be necessary for them to function. If there is still a problem please send me a PM with background info I will make sure you are taken care of.
Regards,
Eric
Magpul Industries Corp.
R&D
Re: P-Mags wont feed, wtf?
What lower? There are some lowers that are tighter and cause the walls of the mag to constrict just a bit and impede proper function.
What lower? There are some lowers that are tighter and cause the walls of the mag to constrict just a bit and impede proper function.
Re: P-Mags wont feed, wtf?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: topher</div><div class="ubbcode-body">IdahoMike, I am sorry to hear you are having issues with your PMAG 20's. No lube or down loading should be necessary for them to function. If there is still a problem please send me a PM with background info I will make sure you are taken care of.
Regards,
Eric
Magpul Industries Corp.
R&D </div></div>
And there it is....CS can't get better than that.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: topher</div><div class="ubbcode-body">IdahoMike, I am sorry to hear you are having issues with your PMAG 20's. No lube or down loading should be necessary for them to function. If there is still a problem please send me a PM with background info I will make sure you are taken care of.
Regards,
Eric
Magpul Industries Corp.
R&D </div></div>
And there it is....CS can't get better than that.
Re: P-Mags wont feed, wtf?
Thanks a ton Topher, I will make sure to PM you if i have any more problems. Iam going to the range in the next couple of days and will report back.
Thanks a ton Topher, I will make sure to PM you if i have any more problems. Iam going to the range in the next couple of days and will report back.
Re: P-Mags wont feed, wtf?
My 20 round P=Mags (.223) wouldn't feed if they had more than 17 rounds in them.
My 20 round P=Mags (.223) wouldn't feed if they had more than 17 rounds in them.
Re: P-Mags wont feed, wtf?
i had a couple of 20 rd mags that hung up, I called Magpul, they replaced ASAP, they even sent a return label to get the problem mags back to inspect them.
i had a couple of 20 rd mags that hung up, I called Magpul, they replaced ASAP, they even sent a return label to get the problem mags back to inspect them.
Re: P-Mags wont feed, wtf?
Have a couple. Never a problem. I think they are a Good Value for the $! That's my 2 cents!!!
Have a couple. Never a problem. I think they are a Good Value for the $! That's my 2 cents!!!
