PDC Chassis: Difference between RimX inlet and Rem700 SA inlet

[Ziloooo]

Anyone has experience with PDC G5C chassis?

I'm interested in one for the RimX but saw there're two different inlet options: RimX and Rem700 SA. What's the difference between those two? Doesn't RimX have the same footpint as Rem700 SA?

A side questions for the PDC G5C Rem700SA inlet and RimX owner, have you encountered any feeding issue on mag? cuz I saw many chassis need to adjust mag latch to allow the proper feeding.

Thank you!

 

[Zap_Rowsdower]

Usually the difference is the ejection port relief cut out. Looking at the picture for the other side, this chassis has one where most are just a flat cut.

Rimx magazine has an adjustable mag catch so should not have an issue.

 

[Ziloooo]

Usually the difference is the ejection port relief cut out. Looking at the picture for the other side, this chassis has one where most are just a flat cut.

Rimx magazine has an adjustable mag catch so should not have an issue.

does this mean the Rem700 SA one has a wider cut that should work on also RimX while RimX's one only works for the RimX?

 

[Zap_Rowsdower]

does this mean the Rem700 SA one has a wider cut that should work on also RimX while RimX's one only works for the RimX?

Would be worth contacting the manufacturer but yes.

 

[Masojoh]

Give Craig a call during the work week. He will likely answer by the third ring. Super nice guy, and he can annswer any questions you may have.