I currently have a PMii with MTC turrets, does anyone know when I and whomever else wants to can send our scopes back to have the new locking feature added?
Rifle Scopes police marksman MTC locking turret upgrade?
- Thread starter p8nt
- Start date
Re: police marksman MTC locking turret upgrade?
Being so new I am not sure but give Mark at the Service Center in NH a call and I am sure he will help
Schmidt & Bender, Inc.
741 Main Street
Claremont, NH 03743
U.S.A.
(800) 468-3450
(603) 287-4830
(603) 287-4832 fax
[email protected]
Being so new I am not sure but give Mark at the Service Center in NH a call and I am sure he will help
Schmidt & Bender, Inc.
741 Main Street
Claremont, NH 03743
U.S.A.
(800) 468-3450
(603) 287-4830
(603) 287-4832 fax
[email protected]
Re: police marksman MTC locking turret upgrade?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Big E</div><div class="ubbcode-body">I currently have a PMii with MTC turrets, does anyone know when I and whomever else wants to can send our scopes back to have the new locking feature added? </div></div>
S & B isn't offering a LT (Locking Turret) upgrade yet, as the LTs' aren't available yet here, and neither are the parts to convert to LT. You should keep in touch with Marcia or Mark Cromwell at S & B USA for the most current availability of options.
Some sound advice for anyone wanting and/or planning to convert the turrets to CCW from CW (or vice versa) or to convert to MTC from non-MTC (or vice-versa): Unless you have a scope that is hard-to-find/hard-to-replace - i.e. Gen 2 XR-equipped, it may be more financially sound to sell the scope and order a new scope that is configured the way you want.
<span style="font-weight: bold">If you go ahead and have an existing scope's turrets converted, be sure that you have any and all desired turret changes performed at the same time - i.e., if the turrets' are being changed (such as when converting rotation direction, converting adjustment increments, or when converting <span style="font-style: italic">to or from</span> MTC Turrets).</span>
For example, suppose that you have a PMII 5-25X LP DT .25 MOA CW scope, and you want to convert it to 0.1 MIL, CCW (Counterclockwise) adjustments and MTC Turrets. You can have everything done at the same time for the whatever the current Service Charge is (it fluctuates based on exchange rates). If the Service Charge is $450.00 you pay $450.00.
<span style="font-style: italic">However,</span> if you didn't have everything done at the same time (say you converted to 0.1 MIL and CCW but didn't go MTC), and you later decided that you wanted MTC Turrets, you would have to pay the Service Charge again (whatever it happens to be at the time) to change to 0.1 MIL/CCW/MTC Turrets and "Drums". If the Service Charge is $450.00 you pay another $450.00. So you would end up paying $900.00, when you could have had everything changed at the same time for $450.00.
Keith
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Big E</div><div class="ubbcode-body">I currently have a PMii with MTC turrets, does anyone know when I and whomever else wants to can send our scopes back to have the new locking feature added? </div></div>
S & B isn't offering a LT (Locking Turret) upgrade yet, as the LTs' aren't available yet here, and neither are the parts to convert to LT. You should keep in touch with Marcia or Mark Cromwell at S & B USA for the most current availability of options.
Some sound advice for anyone wanting and/or planning to convert the turrets to CCW from CW (or vice versa) or to convert to MTC from non-MTC (or vice-versa): Unless you have a scope that is hard-to-find/hard-to-replace - i.e. Gen 2 XR-equipped, it may be more financially sound to sell the scope and order a new scope that is configured the way you want.
<span style="font-weight: bold">If you go ahead and have an existing scope's turrets converted, be sure that you have any and all desired turret changes performed at the same time - i.e., if the turrets' are being changed (such as when converting rotation direction, converting adjustment increments, or when converting <span style="font-style: italic">to or from</span> MTC Turrets).</span>
For example, suppose that you have a PMII 5-25X LP DT .25 MOA CW scope, and you want to convert it to 0.1 MIL, CCW (Counterclockwise) adjustments and MTC Turrets. You can have everything done at the same time for the whatever the current Service Charge is (it fluctuates based on exchange rates). If the Service Charge is $450.00 you pay $450.00.
<span style="font-style: italic">However,</span> if you didn't have everything done at the same time (say you converted to 0.1 MIL and CCW but didn't go MTC), and you later decided that you wanted MTC Turrets, you would have to pay the Service Charge again (whatever it happens to be at the time) to change to 0.1 MIL/CCW/MTC Turrets and "Drums". If the Service Charge is $450.00 you pay another $450.00. So you would end up paying $900.00, when you could have had everything changed at the same time for $450.00.
Keith
