-
Having trouble using the site?
Contact support
Post your 22-250 load
- Thread starter nhassey48
- Start date
Re: Post your 22-250 load
80gr Amax
2.6 OAL
33.5grns of Varget
3200fps
24" 1x7 twist SS Shilen barrel.
80gr Amax
2.6 OAL
33.5grns of Varget
3200fps
24" 1x7 twist SS Shilen barrel.
Re: Post your 22-250 load
38.0g H380
52g Sierra Mk's
Winch Brass
Winch Primers
Factory TIkka
Under .5moa, not uncommon for .3moa
38.0g H380
52g Sierra Mk's
Winch Brass
Winch Primers
Factory TIkka
Under .5moa, not uncommon for .3moa
Re: Post your 22-250 load
just got a new rem 700 with SS 26" barrel, gettin her threaded right now for a can, cant wait to develop a load for her, got some SMK 55 HPBT should be torchin em around 3600. will post more infor when i get her back in a week.
just got a new rem 700 with SS 26" barrel, gettin her threaded right now for a can, cant wait to develop a load for her, got some SMK 55 HPBT should be torchin em around 3600. will post more infor when i get her back in a week.
Re: Post your 22-250 load
34 grains Varget
55 grain V-max
CCI BR Primer
Win Brass
.015 off lands
Factory Rem 700 VLSS Thumbhole 26" barrel
.5 MOA or better out to 350 or so then opens up a little.
Never ran it across a chrono but guessing about 3550. Not the fastest load ever but very accurate in this gun. Never tried it in any others.
34 grains Varget
55 grain V-max
CCI BR Primer
Win Brass
.015 off lands
Factory Rem 700 VLSS Thumbhole 26" barrel
.5 MOA or better out to 350 or so then opens up a little.
Never ran it across a chrono but guessing about 3550. Not the fastest load ever but very accurate in this gun. Never tried it in any others.
Re: Post your 22-250 load
36 grains Varget
50 grain Nosler ballistic tip
fed 210M primer
win brass
3720 fps
36 grains Varget
50 grain Nosler ballistic tip
fed 210M primer
win brass
3720 fps
Re: Post your 22-250 load
So I did a ladder test today using IMR 4064 and RE 15. I got up to 2815 fps with 55g nosler ballstic tips and no signs of pressure. Couldn't chrono the IMR 4064 but bolt was hard to open at 37.5g. I think 37g will be my max load. Also, had a node between 36-37g so it worked out perfect! Hopefully the velocities are good
So I did a ladder test today using IMR 4064 and RE 15. I got up to 2815 fps with 55g nosler ballstic tips and no signs of pressure. Couldn't chrono the IMR 4064 but bolt was hard to open at 37.5g. I think 37g will be my max load. Also, had a node between 36-37g so it worked out perfect! Hopefully the velocities are good
Re: Post your 22-250 load
36.0gr Varget
50gr Sierra BlitzKing
Winchester Lg Rifle Primer
Seated as long as I can get to be just off the rifling
Shoots 5 shot groups right at .65 in out of a 700VS.
Great load and devastating on pairie dogs
36.0gr Varget
50gr Sierra BlitzKing
Winchester Lg Rifle Primer
Seated as long as I can get to be just off the rifling
Shoots 5 shot groups right at .65 in out of a 700VS.
Great load and devastating on pairie dogs
Re: Post your 22-250 load
36.7 grains varget
52 smk
rem brass
(a must) fed 210m primers
clip length - .020
rem 788
1" groups at 200 yds
Bushnell 4-12 3200 elite
36.7 grains varget
52 smk
rem brass
(a must) fed 210m primers
clip length - .020
rem 788
1" groups at 200 yds
Bushnell 4-12 3200 elite
Re: Post your 22-250 load
Powder: 35 grains IMR4895
Bullet: 55 grain Nosler Ballistic Tip
Brass: Winchester
Primer: CCIBR2
Loaded just off the lands
Velocity 3,500 fps
Rem 700 Varmint Special with 24" 1-14" twist factory barrel
Consistant sub .5 moa performer
Powder: 35 grains IMR4895
Bullet: 55 grain Nosler Ballistic Tip
Brass: Winchester
Primer: CCIBR2
Loaded just off the lands
Velocity 3,500 fps
Rem 700 Varmint Special with 24" 1-14" twist factory barrel
Consistant sub .5 moa performer
Re: Post your 22-250 load
35.5 varget
Fed 210
52 grn. Hornady BTHP
Rem case
3570 fps
Rem 700 VLS 26" barrel
35.5 varget
Fed 210
52 grn. Hornady BTHP
Rem case
3570 fps
Rem 700 VLS 26" barrel
Re: Post your 22-250 load
I ran an AI reamer into my .22-250 barrel. I'm running 40.0gr Varget, Rem 9 1/2 primer, and 50g Moly BlitzKings. This load is 5 shots/one hole accurate at 100 yards prone, and is running 3960fps average. I've got no pressure signs, easy bolt lift, and great accuracy. I was thinking about bumping the load a little to get 4100fps, which I think it will, but it shoots too good to mess with. Plus it chunkifies rockchucks.
If you like the .22-250, you've gotta try the AI version!
1911fan
I ran an AI reamer into my .22-250 barrel. I'm running 40.0gr Varget, Rem 9 1/2 primer, and 50g Moly BlitzKings. This load is 5 shots/one hole accurate at 100 yards prone, and is running 3960fps average. I've got no pressure signs, easy bolt lift, and great accuracy. I was thinking about bumping the load a little to get 4100fps, which I think it will, but it shoots too good to mess with. Plus it chunkifies rockchucks.
If you like the .22-250, you've gotta try the AI version!
1911fan
Re: Post your 22-250 load
50 gr. Nosler BT
40 gr. H380
2.472 OAL
Rem Brass
CCI 200 Primer
3650 fps.
Shoots sure enough in quite a few Remington 700s.
50 gr. Nosler BT
40 gr. H380
2.472 OAL
Rem Brass
CCI 200 Primer
3650 fps.
Shoots sure enough in quite a few Remington 700s.
Re: Post your 22-250 load
37.0 grs. RL-17
75gr. Amax
Fed 210's
Another favorite
38.0grs H-380
55gr. NBT
CCI-400's
37.0 grs. RL-17
75gr. Amax
Fed 210's
Another favorite
38.0grs H-380
55gr. NBT
CCI-400's
