• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Range Report PPU 168gr .308 match

Andy Warhog

Sergeant
Full Member
Minuteman
Nov 3, 2011
261
0
W/C MO
Well today, after hunting in the morning, I agreed to sight in a couple rifles for a buddy of mine so they'd be ready for him when he got home. He's working in the mines up in WY right now and came back for rifle season here (MO) and thanksgiving and all that. He ordered two Savage Axis for him and his wife, one in .270 and one in .243. These rifles weight in somewhere around 23oz, I'm guessing, and triggers set at a crisp 75lbs. It was a treat. I finally got them zeroed the best I could, but couldn't manage to get any groups under 2" with either rifle, so needless to say I was not satisfied. So I brought out one of mine to see if it was just me or the wind or what.
I used a Surgeon 591, fluted 22" Krieger 1:11 5r #10 MTU, NF 3.5-15x56, 2lb Huber Concepts, XLR Evolution chassis. Round count was at 59 before I shot my strings today. I've heard a lot of mixed reviews on the PPU 168gr .308 match ammo so I've ben playing with that as I don't have any .308 dies right now, and I wanted to see performance for myself. I don't have a chronograph either so I looked up what a few people had written down for similar setups and I figured something in the 2600-2620fps ballpark. Temp at the time was 66°, humidity 34%, 29.98 inHg, elev. 792 ft. Wind was 8-10mph gusting to 20 from 5-6-7 o'clock positions, dist. 100yds.

IMG_20111118_133634.jpg


Two 3 shot groups. First group is the lower set, the one to the right was my cold bore, group measured 0.563" center to center. The second group is just low of center and measured 0.138" c2c.
After shooting these two strings I was a little more sure of my own abilities, and was convinced that those Savages were mostly to blame. I was also very surprised at how well that PPU did, especially for $17 a box! I think I'll keep plinking with these until I get all of my reloading stuff for this rifle as well as a chronograph. I think I'm going to try different loads with the 168 and 175 smks and see what I can come up with. Ideally I'd like to go with the 175s, but we'll see what she likes to sling first I guess.
 
Re: PPU 168gr .308 match

I've got about the same results on the PPU MV. I use 2626. BC = .213. Don't feel bad if your groups are about 1.5 MOA.
 
Re: PPU 168gr .308 match

Those errant shots are because Prvi doesn't make a very good bullet. They are not consistent in size. Prvi is a market nicher. They put match on the label and sell cheap to grab a piece of that market. I've shot hundreds of rounds of Prvi 168. For the same amount of money you can get American Eagle 168 OTM. The bullet is made by Speer and shoots darn close to Federal SMK 168.
 
Re: PPU 168gr .308 match

I apologize for the late response. Forgot about this thread. The AE brass is re-loadable. MV is consistent for me at 2650 with 24" barrel.