Precision Rifles.....show em!!

[sniperjhk]

MDT HS3 Chassis system with MPA EVG Grip (Enhanced Vertical Grip)

 

[mugsie]

View attachment 6904940View attachment 6904942View attachment 6904943View attachment 6904944View attachment 6904946View attachment 6904949View attachment 6904951

Wish I had that talent! I highly respect machinists, some of them are true artists with what they can do with metal. Me? I'm lucky I can draw a stick figure!

 

[TerryH]

My 'go to' rifle.

KMW CF Sentinel
Older Surgeon action
Benchmade barrel 1:8 Med Palma finished at 24" with Bastard brake
in 6.5x47, Berger 130g OMT Tac's over 39g N140 running around 2890fps
March 3-24 x 52 in March UK rings.

Mr Cross - what can I say, one of the best there is!

 

[ICU22250]

I forgot to post this one on here, it's my PVA 6.5x47 Lapua. Here is some specs.

Manners T2A with mini chassis standard fill with cups on both sides and three studs with Badger EFR in GAP camo

Bighorn TL3 Patriot Brown

26" Bartlein in Marksman contour Patriot Brown

PVA Mad Scientist Brake

Timney Calvin Elite trigger

Harris Swiwel Bipod

ARC M10 34mm Med Rings

NF ATACR F1 7-35 Mil-C

Accuracy First Scope Level

 

[DellaDog]

Alamo Precision Rifles
Defiance Deviant 6.5 Creedmoor
Bartlein 24”
Manners T6A

 

[Strykervet]

.50BMG DTA HTI w/USO ER-25 in Badger SASR rings, KAC PVS30, PEQ2A, LRA bipod and Elite Iron suppressor. Not pictured is an Elite Iron custom brake timed for this rifle without any spacers. The suppressor is timed TDC to the barrel also. Sling is a padded Vickers. Don't ask me how it shoots, I'm chomping at the bit to take it out. I've had it a while and got it before prices went up on these; took me a while to get the scope and the can, then loading gear, etc. Finally the spotting setup. Now I'm ready to try it out.

 

[Vargmat]

Strykervet: What a beast!

 

[DXT_Shooter]

Finally got my rifle all put together and I can’t wait to shoot it.

Tikka CTR 6.5 CM 20” barrel
Sterk FDE Bolt and Shroud
APA Little Bastard Brake
KRG Bravo FDE
Harris BR Bipod
Mountain Tactical 20MOA Rail
Seekins 30mm Low Rings
Leupold VX5HD 3-15x44 Firedot Duplex with CDS and locking turret
AICS 5 Round mags

Going to use for hunting Whitetails and do some long range shooting out to 1000 yards maximum.

 

[MACHTECH]

Great minds think alike Strykervet! Except mine is .375 Cheytac.

 

[redneckbmxer24]

Hi-Point Carbine in the front, H&R Handi Rifle in the rear. UTG optics and accessories all around.

 

[AMGtuned]

Hi-Point Carbine in the front, H&R Handi Rifle in the rear. UTG optics and accessories all around.

Sick. And the Krylon really makes those accessories pop. Lmao

 

[Filthy fish]

 

[WleeSC]

Remington 700 chambered 30-06
Schneider m40a5 contract barrel 24" cerakoted graphite black
Nightforce SHV F1 14x50
Grayboe Ridgeback stock
Surefire MB762SSAL/RE muzzle brake
Badger Ordnance M5 DBM
PTG 1 piece bolt micro slicked
Harris bipod

 

[redneckbmxer24]

Sick. And the Krylon really makes those accessories pop. Lmao

That’s actually dollar store spray paint which beat out Cerakote in a blind huffing test.

 

[308_monsta]

1st post on here, but here's one of my rifles
Remington 700 308
Trigger tech special trigger
Manners MCS-T4A
Atlas bipod
Henderson rail
Nightforce atcar 5-25
Nightforce 20 moa rail

 

[308_monsta]

here's the other.
Remington 700 30-06
Brux 26" barrel
Grayboe renegade stock
Trigger tech special trigger
Cdi precision bottom metal
Harris bipod
Henderson rail
Badger ordnance 20 moa rail

 

[Kanati]

View attachment 6927656here's the other.
Remington 700 30-06
Brux 26" barrel
Grayboe renegade stock
Trigger tech special trigger
Cdi precision bottom metal
Harris bipod
Henderson rail
Badger ordnance 20 moa rail

@ 308_monsta

Great looking rifle. Who makes that bolt knob?

 

[308_monsta]

@ 308_monsta

Great looking rifle. Who makes that bolt knob?

Thank you sir, it's a Accurate Ordnance made knob

 

[Noles77]

Maybe pics go in this time

 

[Noles77]

Couple of mine

 

[Kanati]

Thank you sir, it's a Accurate Ordnance made knob

Right on, thanks for the response.

 

[Philys21]

View attachment 6927656here's the other.
Remington 700 30-06
Brux 26" barrel
Grayboe renegade stock
Trigger tech special trigger
Cdi precision bottom metal
Harris bipod
Henderson rail
Badger ordnance 20 moa rail

Is that OD green CeraKote?

 

[Guns&WhiteWater]

6.5x47L
Bighorn TL3
PacNor super match Heavy Palma @ 24"
MDT ESS
Trigger Tech Special
SB PMII P4FL
Seekins Precision rings
TBAC 30 CB, still waiting on my Ultra 7
Gunsmithing by Greg Young @ Southern Precision Rifles

 

[christopher.dow]

6.5x47L
Bighorn TL3
PacNor super match Heavy Palma @ 24"
MDT ESS
Trigger Tech Special
SB PMII P4FL
Seekins Precision rings
TBAC 30 CB, still waiting on my Ultra 7
Gunsmithing by Greg Young @ Southern Precision Rifles

Nice rifle! You picked excellent parts and Greg does great work (and is easy to work with, as well).

 

[BradW]

Might as well throw a couple of mine up as well.

-Surgeon 1581
-.338 Lapua
-Bartlein Heavy Palma, 1:9.35 twist
-McMillan A-5
-Badger FTE brake
-Vortex Razor HD Gen2
-Spuhr 9mil mount

-McMillan Bros Tubb 2000
-6.5 Creedmoor
-Nightforce NXS
-Nightforce Rings

 

[Guns&WhiteWater]

Nice rifle! You picked excellent parts and Greg does great work (and is easy to work with, as well).

Thanks Christopher. Yes Greg does excellent work. You just can’t put a price on confidence in your equipment.

 

[SBGreen0369]

M40A5ish
McMillan A5 w/ USMC Sniper fill
Trued Rem700 SA
Badger clip slot rail
Schneider #7 1:12 barrel
Badger bottom metal
Timney 510
SF Break
NF ATACR F1 5-25x56 Mil-C

 

[viking78]

View attachment 6924710

Was is easy fitting to make that MPA pistol grip to drop in to that MDT chassis?

 

[Black max]

Here's one I've been shooting a lot lately.
Ga Precision Thunder Ranch in a KMW Sentinel stock. Most accurate rifle I own!

 

[ophious]

Short Action Customs Alpha 11 Action Integral 20 MOA base, AW magazine well. Fluted bolt, .062 firing pin
Melonited Bolt and Action
26" Bartlein M40 contour barrel, 5R rifling, 6.5mm, 1-8" twist Tactical Match reamer
Area 419 HellFire Muzzle Brake
MPA BA Chassis with Folder
Kahles K624i SKMR3
Accuracy 1st scope level
Tenebraex scope covers
Spuhr 4001
Timney 517 Straight Trigger 1.5lbs
BT65 CAL Atlas Bipod
SAP Positional Rifle Sling
Plug'r chamber indicator flag

 

[viking78]

Very very nice rifles you got guys

 

[HolyCity73]

Guess I had better add the latest addition.
Thanks Robert.

 

[Schralp]

Posted in the Tikka thread too, but what the hell. Tikka T3X barreled action (308) in XLR Evolution Chassis, YoDave trigger upgrade, Mtn Tactical bolt and bolt shroud, Harris/HHC bipod, ARC M10 rings/mount, had a T5XI 5-25, now it's wearing a IOR 3.5-18x50. Soon as barrel is shot out, it's getting a Hardy CF barrel and some cosmetic love from LRI...

How do you like the Steiner Scope?

 

[MrTomMelton]

Mossberg ATR100 chambered in .270, CVLife 16-26 optics, and the muzzle brake I designed, machines, and blued myself. Bypod is Harris style.

 

[Vodoun daVinci]

My very first precision rifle build - on a budget using factory action. Turned out super for me. Way more accurate then I am but I'm getting better.

Savage 10 FCP-SR in 6.5 Creedmoor - 24" fluted barrel 1/8" twist threaded
Area 419 Hellfire brake
MDT Lss-XL Gen2 tactical chassis with 10 slot M-Lok rail
Ergo Tactical Deluxe grip
MDT AICS Polymer 8 round Magazine in .308
XLR Extreme butt stock
Atlas BT-10 bipod
Vortex Crossfire II 6-24X50 Scope with Dead Hold BDC reticle
Vortex Defender flip up caps
Vortex bubble level
TAB Gear large rear bag

Shoots .6 -.7 MOA out to 600 yards. Very happy with <$2K invested so we stayed within budget.

VooDoo

 

[PullMyTrigger]

I was going to wait for a decent backdrop, and better lighting, but the hell with that. This is my first custom bolt gun, making her Snipershide debut.

6.5 Creedmoor
Impact Precision action
Bartlein 1/8 marksman contour @ 26”
Piercision 5 port self timing brake
Mpa comp chassis
TT flat diamond
Kahles 525i Skmr 3
Arc M10 medium rings
Gunsmithing by Eric Goss @ Axisworks, Tempe AZ

 

[Skullboy]

PGWDTI Coyote in .260 Rem with 26" Bartlein 1 in 8" twist barrel.
Heathen Muzzle brake
LRA bipod
S&B 5-25X56mm PM-II. P4L Reticle.
Badger Ordnance rings.
Vortex scope level.
JSA Tactical shooting bags, and barricade rest.

 

[tj-tech]

Two Ritter&Stark SLX from a shooting event yesterday in Västerås (Sweden). 100 to 515m range.
Slightly different setup: bipods and optics, besides calibers being 308w and 6.5 creedmoor. Both using Hausken JD224 silencers.

 

[Rondogg]

I was going to wait for a decent backdrop, and better lighting, but the hell with that. This is my first custom bolt gun, making her Snipershide debut.

6.5 Creedmoor
Impact Precision action
Bartlein 1/8 marksman contour @ 26”
Piercision 5 port self timing brake
Mpa comp chassis
TT flat diamond
Kahles 525i
Arc M10 medium rings
Gunsmithing by Eric Goss @ Axisworks, Tempe AZView attachment 6931707

Another Arizonian. Nice set up.

 

[sniperjhk]

Savage 10 TR LE 24” .308
MDT HS3
Vortex Viper PST
MPA EVG grip

 

[sniperjhk]

View attachment 6932635

Savage 10 TR LE 24” .308
MDT HS3
Vortex Viper PST
MPA EVG grip
View attachment 6932635

 

[EchoDeltaSierra]

First trip to the long range for PRS practice night (800 yards last night). Shoots well and the Magpul Pro 700 chassis is a wonderful fit. During next week's practice I'll swap to my 5-25x scope and have a Magpul Bipod installed.

 

[Buzzbee]

Fairbanks and fairbanks
Deviant action
Bartlien
Jewel


I need to have it painted, any suggestions?

 

[Noles77]

Cerakote metal and rattle can the stock i like FDE all over and then splotch in matt black to your our liking

 

[viking78]

PGWDTI Coyote in .260 Rem with 26" Bartlein 1 in 8" twist barrel.
Heathen Muzzle brake
LRA bipod
S&B 5-25X56mm PM-II. P4L Reticle.
Badger Ordnance rings.
Vortex scope level.
JSA Tactical shooting bags, and barricade rest.

They make quite deam sweat rifles now day in the Canada, this one is really slick one, i would love to have one of these.

 

[viking78]

First trip to the long range for PRS practice night (800 yards last night). Shoots well and the Magpul Pro 700 chassis is a wonderful fit. During next week's practice I'll swap to my 5-25x scope and have a Magpul Bipod installed.

View attachment 6932959

Is that pistol grip solid plastic?
What kind of graining that grip has?
Is it something like MOE grip is?
I would really like too see this chassis coming to Tikka rifles too.
As a matter of fact, i wroted to Magpul when i saw this beautiful chassis, that are they going to make it for Tikka too, they told me that not at this point, but they dont say no for that, so maybe in the future we might see these for Tikka action too.
I really like that idea, that you can move that pistol grip for the point, that you have the sweet spot for the trigger.
I would like to have one of these.

 

[ejg]

Ready for our deer/fox season, front 223 1/8 twist T3 , mid DCR custom 300wm, back 308 T3 CTR. Hausken Suppressors and PSE Carbon stocks.

edi

 

[Guiseppe83]

Afternoon everyone, new to forum. Wanted to say hello to everyone. Figured was a good of thread as any. Hope you’re all doing well.

 

[ruebarb]

Afternoon everyone, new to forum. Wanted to say hello to everyone. Figured was a good of thread as any. Hope you’re all doing well. View attachment 6933873

My MPA in 6.5 is a tac driver, I compare all other rifles to it, can't beat the value.

 

[Guiseppe83]

My MPA in 6.5 is a tac driver, I compare all other rifles to it, can't beat the value.

I agree very impressed with it. Was on the fence about it a few few others but I felt I would be better in long run spending extra money on it than starting with rpr