-
Having trouble using the site?
Contact support
This is probably the last picture of my rifle in this configuration...
Just assembled her today… my first long rifle build
Bergara B14R 20” stainless heavy barrel
Solus Competition Chassis 15”
Bushnell Match Pro
Atlas bipod
Well, got few actions in so I got this one built up finally... such a cool little gun. This gun is a absolute LASER!! Robert at Rubicon Precision knocked this one out of the park!! Should make a great fun always in the truck gun!!
Sick setup man and I love that guy's logo on the barrel!
Thank you, I’m very happy how they turned out. The green is a Bergara ridgeback 6.5prc with custom cerakote job done in light multicam green, battleship grey, & bullshark grey. Barrel done in ODG, Strapped with a Gen 3 razor 6-36x56. The gold is a Bergara action and barrel chambered in 6.5cm the stock is a greyboe ridgeback, however it’s not a factory Bergara ridgeback. The stock was bought off gunbroker, done in Troy coyote tan, desert sand, and gold. Barrel and action done in midnight bronze. Strapped with gen 2 razor 4.5-27x56. My next build will be a 22cm or possibly 7 prc, I know I shouldn’t be looking ahead that far. I’ve gotta shoot the barrels out of these first haha.
I love it the turrets are great the reticle is crisp and even at 36 power with the aperture lens on it doesn't get dark. I've been using a nightforce nx8 and a delta stryker and this theos is a step above
So last night I did a side by side head to head with my delta stryker hd and man I've always thought the delta was really good but compared to the theos it looks like a sub 500 dollar scope
Ya I've never looked through a nexus but I do have a NF and the theos is more crisp and clear
With a length-of-pull that long, you must have had a great future as a basketball player or boxer.
700 VSSF, Christiansen chassis, Lilja .308 20” barrel, TriggerTech, Premier Reticles Heritage w/Sphur mount.
Last edited:
Australian Tactical Precision. Relatively low cost and cheap shipping from down under (I received mine in less than a week).
LPA Fuzion
20” Bart 6.5x47
Manners Folder
5-20 Ultra Short
20” Bart 6.5x47
Manners Folder
5-20 Ultra Short
Not quite the precision rifle most expect.
It makes me look bad. The bullet goes where you aim it. So if you don't aim correctly, you cannot even hope that a large group can edge you into the bull.
Barnard P action, Krieger .300-.308" 1-12 32" barrel, System Gemini stock, Centra rear sight with Centra 0.5-1.5mm iris, RightSight front sight.
Berger Fullbore.30 cal out of Lapua brass driven by 45.4gr Varget for 3010 ft/s. Might not be benchrest groups, but is not far off.
Wow! That really is different. Really like the way the integrate the wood with the rest of the chassis. Definitely not my cup of tea but I really like it.
R700
Shilen 26” stainless prefit 1/10 308
lil bastard brake
Razor gen3
.54” @300yds w Fed smks
Shilen 26” stainless prefit 1/10 308
lil bastard brake
Razor gen3
.54” @300yds w Fed smks
Last edited:
Pretty awesome setup! You should go try the cortina blackjack challenge Kyl rack at 500 yards if open sights gets blackjack he pays 5000
Would love to, but for two problems.
1 To hit a target you need to be able to see it. 2" is mighty small at 500 yards through a peep sight.
2 To get to his range and back home will cost me in excess of $5000 not including rifle and ammunition. Then still need to eat...
Ya i don't know if you saw his latest video but I think 3 people tried it with open sights and 1 guy made it to the 4th target I believe which I'm pretty sure is a 5 inch plate but he couldn't get the 5th plate. Pretty incredible stuff though
Saw your build on r/longrange and i'm STILL salivating, what a sick buildRecent 7 Short Sherman build
Not the most scenic photo but it gets the point across.
SBR MPP barreled action in .308.
KRG Bravo
Leupold MK5 3.6-18 PR2 Reticle.
Badger C1 MAX 1.54 mount.
Silencerco Scythe TI.
Running ~2250ish fps with 168 FGGM.
I've got a few other small bits and bobs coming for it. There's a decent amount of muzzle climb but the hit to the shoulder is surprisingly soft given the barrel length. Super fun gun.
Last edited:
Putting together a 223 trainer rifle. It's a new model Rem 700, Timney trigger (which honestly feels great), Area 419 Scope base, Seekins Rings, Trijicon Credo HX 2.5-15 scope, and I have a Pork Sword chassis heading to the house as we speak. It has a 1-8 twist 16.5" barrel. I'll be loading 77TMK's for it in Sig brass. I shoot the Sig Match ammo to fire form it. It shoots that stuff into 1/3 moa groups pretty consistently when I do my part. I'm dropping it off at Kampfeld Kustoms to have the bolt fluted, a side bolt release installed, and an extended bolt handle put on so it'll clear the scope by a bit more. I also might try loading some 80ELDM's to see if that 1-8 twist will handle them. We will see.
Shorty bolt actions are truly gods favorite rifles. They're so damn much fun to shoot! Nice setup!
I F’in loved the Sig line of 5.56 77gr ammo, it shot impeccable groups from my Mk18, Jakl, Sako 461, M16A1 clone and 723 clone sbr. One of the few decent priced ammos that all my rigs enjoyed. Wished I saved that brass instead of letting it get mixed in the 55gal drum with the rest. Short bolt gun is my next to-do for a trainer.
Yeah. I've shot Sig ammo in numerous AR's and pistols. Everything I shoot it in likes it. Its really great stuff. I think I've got 1500 rounds of it still. That stuff is just great. I've loaded their 308 brass with 155TMK's for my GSR and it shoots sub moa with it, and that rifle was not designed for that kind of precision.
KRG C-4 got new color.
Elite E-170 series Coyote Tan.
Elite E-170 series Coyote Tan.
