Precision Rifles.....show em!!

[ReimoS]

A Tictac (300WM), Baby Tictac (308), and couple of blasters. A little mismatch in colours - perhaps when the snow is gone I will deal with it.

 

[Pl_silverado]

TRG-42 .338LM w/ ATACR 5-25x56 F1
TRG-22 .308 Win w/ NXS 3.5-15x50 & SilencerCo Omega

 

[beaverpelt]

Range report?

Haven't made it to the range yet but will update when I do

 

[stereo.pete]

Nothing fancy here, just a dressed up Tikka T3x CTR chambered in 6.5 creedmoor.

Tikka T3x CTR chambered in 6.5 Creedmoor
Manner's T6A inlet for the CTR bottom metal
Spuhr 20moa mount
Vortex Razor 5-20x50
Area 419 Hellfire brake
Harris Bipod with Hawk Hill feet
Sterk bolt knob

 

[DHwreckage]

Heres my Tikka that i finally finished

12.5lbs as pictured

 

[PFG]

Nothing fancy here, just a dressed up Tikka T3x CTR chambered in 6.5 creedmoor.

Pete - wow! Love this one. Can we get a few details?

Intersted in knowing which Manners this is, the scope mount, and final weight.

Great build. CTR is a really capable foundation for a nice do it all rifle.

 

[Thud]

Not finished yet but got most of it.
So far its a 30br

 

[Jhln8c]

7mm RM - Sold
Built by GAP
Rem 700 blue printed Action
Bushnell XRS

Bergara BMP 6.5 CM
Bushnell XRS
Timney CE
ABA brake

 

[TN Shooter]

Trued R700 Action
26” Bartlein 5r chambered in 6.5 Creedmoor
Badger Ordnance Thruster Brake
Timney 510 Trigger
Manners MCS T2a in GAP Camo
Vortex Razor 4.5-27x56 in Vortex PMR Rings
Vortex Switchview Throw Lever
Harris S-BRM 6”-9” Bipod

 

[K9Bug]

Just got my rifle back from my smith!

Big Horn Arms TL3 Action
24" Bartlein 5R 6.5 Creedmoor Rem Varm Barrel
Manners T6A Elite Carbon Fiber Stock in GAP Camo
TriggerTech Special Trigger
Area 419 Hellfire Muzzle Brake
Athlon ARES BTR 4.5-27x50 mounted in Seekins Precision Rings
ATLAS Bipod Rail
PIG Skins Barricade Pad

 

[stereo.pete]

Pete - wow! Love this one. Can we get a few details?

Intersted in knowing which Manners this is, the scope mount, and final weight.

Great build. CTR is a really capable foundation for a nice do it all rifle.

Thank you sir, I updated the specs to my original post.

 

[1clicktrick]

338 Win Mag
26 in Shilen select match 1in bull barrel
Chamber throated .160"
Savage dual port target action single shot
McMillan A5 stock
Savage oversize bolt handle
Precision Armament Break
Warne 20 moa base
Leopold Mark 4 rings
Vortex Viper PST 6-24-50

 

[Tony1320]

Not finished yet but got most of it.
So far its a 30brView attachment 6872200
View attachment 6872201
View attachment 6872202

God damn I love that stock, is it a Speedy Spear of Destiny? Would you mind posting a picture of the underside?

 

[Thud]

Tony,
The stock is a Shurly Brothers spear of destiny.
It has nothing to do with speedy the picture of the bottom is showing the drop port hole. The finish of the bottom is like shown the whole way to the tip. I didn't want to paint the bottom it would be lost to see.

 

[Tony1320]

Tony,
The stock is a Shurly Brothers spear of destiny.
It has nothing to do with speedy the picture of the bottom is showing the drop port hole. The finish of the bottom is like shown the whole way to the tip. I didn't want to paint the bottom it would be lost to see.
View attachment 6872934

Oh I thought the Spear of Destiny was designed by Speedy I only recently read about them.

That picture is actually exactly what I wanted to see. Your action bolts mount flush mine are sticking out and I don't like the way that looks. It looks way better being flush like yours

 

[Thud]

T,
One thing about speedy he will take someone elses design and name it his.
You can trim the screw length so they can fit flush.
If possible post picture maybe I can help.
Thanks,
Lew

 

[Tony1320]

T,
One thing about speedy he will take someone elses design and name it his.
You can trim the screw length so they can fit flush.
If possible post picture maybe I can help.
Thanks,
Lew

Oh really that's unfortunate

Its getting painted right now but when I finish it up I will, thanks

 

[Thud]

Tony
Let’s see it when done.
Thanks
Lew

 

[Mr.BR]

T,
One thing about speedy he will take someone elses design and name it his.
You can trim the screw length so they can fit flush.
If possible post picture maybe I can help.
Thanks,
Lew

One thing about 'Thud',when in doubt he will just make something up

http://shurleybrothers.com/spear-of-destiny/
Shurleys dont hide the fact that Spear of Destiny is joint design
''The Spear of Destiny Stock (SOD) was a joint collaboration between our owner, Tommy Shurley, and hall of fame shooter Speedy Gonzalez. The SOD was engineered with a scoop or swayback cheek piece and cooling ports in the forearm to aid in barrel cooling. It also has a longer forearm coupled with a short stock toe which is intended to be used with an adjustable recoil system such as the RAD system by Hart Shooting or a Tubb 4-way just to name a few.''

 

[Nemasis]

700 SPS 308 Varmint, HS Stock and Mag, Jewel Trigger, Leupold Mark 4 8.5X25X50 Mil Dot, Leupold Base and Rings

700 SPS 308 Varmint, Badger FTE Brake, HS Fully Adj. Stock and Mag, Jewel Trigger, Leupold Mark 4 8.5X25X50 Mil Dot, Leupold Base and Rings​

700P 300 Win Mag Varmint, JP Brake, AICS 1.5 Stock, NF NXS 5.5X22X56 Scope, Badger Base and Rings, Timney Trigger ​

Sako TRG 42 338 Lapua Mag with all Sako accessories,

NF NXS 5.5X22X56 Scope​

 

[stereo.pete]

@Nemasis might want to try those pictures again...

 

[Vinvan406]

Savage 10 in 6.5CM
Masterpiece Arms Chassis
Steiner T5XI 3-15 SCR Mil Ret Mil Turrets
Badger Ordinance Base Warne Rings

 

[Nemasis]

@Nemasis might want to try those pictures again...

K

 

[buskin]

Here's mine:

E.R. Shaw Inc. Custom Mk VII Bolt-Action Rifle
• Caliber: 6.5 Creedmoor
• Barrel: 26"; 4140 Chrome-Moly; Varmint Weight - Contour 3, w/spiral fluting, button-rifled. 6 grooves, 1:8" RH twist, plus optional muzzle brake
• Trigger: Savage AccuTrigger; 3.9-lb. pull weight

Accuracy International AICS AT Savage M10 1.5 Green Stock, AI cheekpiece thumb screws

B&T Industries Atlas V8 Bipod, AI Spigot

Leupold VX-3 6.5-20x40mm Scope, Mark 4 2-Piece Mount, QRW 1” Medium Rings

Blackhawk! Long Gun Pack Mat

 

[PinesAndProjectiles]

Here it is. Tikka T3X CTR with a 1:8 twist 6 Creed chambered by PVA. KRG X-Ray with aluminum forend and spigot. Harris BRMS Bipod with Pod Lock and a Bushnell XRS in Seekins Low Rings on top of a Nightforce 20 MOA mount. Will shoot in the .3s and .4s with H4350 and 105 Hybrids. The can is a Rugged Surge in the 7.5" configuration and weighs in at 16.2 pounds.

 

[Engineer260]

260 Rem
Rem 700 blueprinted lefty action
21.5 inch #4 brux barrel
Manners MCS-T carbon fiber stock
EGW bedded base and TPS low rings
Bushnell LRSHi 4.5-18x44 with vortex caps
Weighs in at 10.1 lbs as shown
Built by Center Shot Rifles

 

[Langford]

Here's my Precision hunter...

Remington 700 SA blueprinted by Valhalla Rifleworks
Proof carbon fiber light sendero contour barrel in 6.5 Creedmoor
Area 419 hellfire brake
B&C stock painted by Excess Paint Custom Airbrushing
Mpa bottom metal and accurate mag
Timney trigger
Seekins base
Spuhr 4001 mount
S&B Polar t96 4-16x56 FFP p4f illuminated reticle
Seekins SRS Bipod rail
Atlas psr Bipod

 

[sporty02]

nothing to special here, Rem 700 .308 in a bell and carlson stock with a trigger tech trigger and a Vortex Viper pst. just waiting on the weather to get nice out.

 

[PinesAndProjectiles]

Here's my Precision hunter...

Remington 700 SA blueprinted by Valhalla Rifleworks
Proof carbon fiber light sendero contour barrel in 6.5 Creedmoor
Area 419 hellfire brake
B&C stock painted by Excess Paint Custom Airbrushing
Mpa bottom metal and accurate mag
Timney trigger
Seekins base
Spuhr 4001 mount
S&B Polar t96 4-16x56 FFP p4f illuminated reticle
Seekins SRS Bipod rail
Atlas psr Bipod

That paint is incredible!

 

[viking78]

Two of them

 

[Langford]

That paint is incredible!

Thanks, Andre (Excess Paint Custom Airbrushing) did an amazing job.

Here's a better photo showing the stock, pictures do no justice though.



A couple of other stocks he's done for me, one more is in the works...a "Hulk" build for my son

 

[pmclaine]

I miss Goddamnrights custom painted rifles......

 

[Rangemaster]

Here is a quick pic of my .308 PRS / F-TR rifle.

 

[Thud]

Rangemaster,
Looks like what I want to build.
Thanks for the Idea.

 

[Rangemaster]

Thanks, the gun started out as a remington sps.
After a year and two barrels, several stocks I found a perfect setup and what shoots lights out.

 

[Rangemaster]

nothing to special here, Rem 700 .308 in a bell and carlson stock with a trigger tech trigger and a Vortex Viper pst. just waiting on the weather to get nice out.

Hey Sporty,

That was my rifle 6 months ago. You could not tell the difference.
I like B&C stocks, but the weight with my scope was too much weight for both classes on my 308.

 

[jamesZ71]

 

[sporty02]

Hey Sporty,

That was my rifle 6 months ago. You could not tell the difference.
I like B&C stocks, but the weight with my scope was too much weight for both classes on my 308.

I have been slowly building it a little here and there. Sadly I still haven't put any rounds down range with it yet. How'd yours shoot?

 

[Sgt Jaycee]

My own design. I'm calling it the:
"Eris Mk. II S.W.S."
Stiller Precision Spectre Short Action
Proof Research 22" Carbon Fiber Barrel 1-9.4 twist rate, chambered in .308
Triggertech R700 Special Trigger
Atlas 6-9" bipod
Cadex Core OT Chassis: Tan
Vortex Gen 1 Viper PST FFP 6-24x50
Vortex PMR 30mm High rings
Magpul Gen. 3 PRS Stock
(Not pictured) Silencerco Harvester 300
(Next upgrades)
Spuhr Tactical Scope Mount
Schmidt and Bender PM-II 6-25x50

 

[tehweej]

Factory Savage Stealth 6.5 Creedmoor
4.5-18 LRTSi
Saker 762

Edit to add: Best 5 shot group to date. 0.302" if i remember right. Average group size that day was 0.75 moa.

 

[cdeiglmeier]

So happy I finally get to post here, this is my first major precision rifle besides several run of the mill hunting rifles.
SAC built 7mm Rem Mag
SAC Left handed Alpha 11 long Action (Defiance)
Bartlein Barrels 28 inch Heavy Palma
APA Gen II Fat Bastard brake
MPA BA Side folding Left handed chassis
Timney Calvin Elite Trigger
US Optics ER25
Spuhr Mount
20 MOA scope base
Atlas Bipod
Custom Cerakote work all done by Custom Gun Coatings

Still doing load development but currently looking promising with 180 grain Berger hybrids at ~3050 fps, she's a hammer.

 

[Nature boy]

Remington 700 sps tactical , night force shv, night force base and rings, atlas bipod, little bastard break and krg whiskey 3 gen 6 and trigger tech trigger.

 

[AndyR]

Bighorn TL3
Bartlein 28" 1/7.25 6BR
S&B PMII 5-25 W/Tremor3
MPA comp chassis
SilencerTech 5" can
Atlas Bipod w RRS ARCA dovetail mount

 

[AndyR]

Bighorn TL3
Bartlein 28" 1/7.25 6BR
S&B PMII 5-25 W/Tremor3
MPA comp chassis
SilencerTech 5" can
Atlas Bipod w RRS ARCA dovetail mount
View attachment 6878250

 

[ShortShooter1908]



 

[Vargmat]

My Remington 700 Police, 300 winchester magnum. In a modified Grayboe Renegade stock, Schmidt PM2 and Stalon Victor L suppressor, the usuall stuff really.

 

[celtics10]

Finally tossing this in here
Specs
-left bolt right port Defiance Deviant Short Action
-26" extra chunky barrel profile chambered in 6.5 creedmoor with an Area 419 hellfire brake
-AICS folder with the cool green viper skins
-Timney 517 in the 1.5-2 lb range
-atlas PSR bipod
-Gen I Athlon Cronus in a Vortex Mount with cheapo bubble level and vortex flip caps
-Cole Tac Big Boss bag

Personal Touches
-BDC wrapper with drops every 25 yds out to 1200
-wind drift, DA adjustments, and walking/running coyote lead data taped on the rifle (can't forget em this way)
-89 cent adhesive foam cheek pad from hobby lobby

I picked it up used here last August - I think I'm the third owner of this action, if not further down the line. It's a pig at around 18 lbs, but it shoots fantastic.

 

[PAYDIRT]

 

[Genuine]

Whiskey 3 gen 4 folding chassis
Bartlein 24"
Surgeon 591
S&B 5-25 MSR
Spuhr mount
Timney 2 stage straight trigger

 

[Daniel33]

Defiance 5

Defiance 3

6.5 Creedmoor
Defiance Deviant Tactical Action
Bartlein 26" Barrel
APA Mini Bastard Muzzle Brake
Timney Calvin Elite Trigger
Masterpiece Arms BA Folding Competition Chassis
S&B PMII 5-25x56 MSR Reticle
Spuhr Mount
Atlas Bipod

Which SPUHR Mount are you using ?