Precision Rifles.....show em!!

[DaleGribble82]

CZ 557 UCS .308 MK4 LR/T M1 turrets TMR 4.5x14x50mm

Steyr Elite .308 MK4 LR/T M1 turrets TMR 6.5x20x50mm

User built SPR
Aero Precision upper & lower with 15 inch keymod rail dipped in battle-worn coating

20 inch Wilson Combat Super Sniper threaded and fluted barrel with an armor tuff burnt bronze coating chambered in .223 Wylde

Silencerco ASR muzzle break and blast mitigator

SLR rifle length gas system

JP BCG with JP enhanced bolt

JP Silent Capture buffer assembly

JP rifle tube extension

JP pistol grip with finger grooves

Luth-AR MBA-1 buttstock

Radian Raptor Charging Handle

Geissle single stage precision M4 curved bow set at 3.5lbs with lower parts kit

Leupold VX-R Patrol SPR reticle 1.25x4x24mm

 

[cnabb96]

Bergara HMR in .300 Win Mag
EOTech Vudu 3.5-18x50
Area 419 Scope Rail
Area 419 Sidewinder Brake
Atlas BT10 V8

View attachment 6977592

How’s that rifle shooting for you? I’m looking at picking one up

 

[Simia Dei]

Top Rifle:

Tikka T3 CTR
Proof Research 26" 8T Steel Heavy Palma barrel chambered in 7mmSAW with APA LB brake
Manners T4A stock with CTR DBM (GAP pattern)
Sterk swept bolt handle
S&B PM2 (P4L reticle) with Badger rings
Area 419 Arca, RRS harris attachment with Harris bipod

Bottom Rifle:
GA Precision Tempest with Jewell HVR trigger
Proof Research 26" 8T Steel Medium Palma chambered in 7mmSAW with APA LB brake
Manners PRS2 stock with mini-chassis (Elite Moss pattern)
NF 4-16x42 ATACR (T3 reticle) with Badger rings
Area 419 Arca and Arcalock clamp. Atlas bipod

 

[LucasJ1990]

6.5 CM
Tuebor Action
Proof research 26” m24 contour barrel
Silencerco brake
NF ATACR 7-35x56 with NF rings
J Allen chassis

 

[Redmist]

One with a twist

PGWDTi Coyote


I built this rifle for UK PRS Competitions using a new PGW Coyote action and BM putting it into a PSE Composites E-Tac stock

Bartlein 8 twist with "blaser style" fluting

Chambered in 6.5x47 Lapua

Trigger is a Bix n Andy

Scope in images is PM11 10x42, the rifle now wears a 4-16 PM11

 

[Provokedsniper]

Do these count...

 

[PBWalsh]

@Provokedsniper

Whats the specs on that green/stainless rifle at the bottom, looks really light weight.

 

[Provokedsniper]

@Provokedsniper

Whats the specs on that green/stainless rifle at the bottom, looks really light weight.

That's a seekins havak in .308, weight is around 9 pounds total. That's my new hunting "tactical " rifle and I love it!

 

[PBWalsh]

Nice, just put a down payment on an FN to have a lighter weight companion to my AIAT. The Havok’s are good looking, well balanced rifles.

 

[Provokedsniper]

Nice, just put a down payment on an FN to have a lighter weight companion to my AIAT. The Havok’s are good looking, well balanced rifles.

They are, and very well balanced and they shoot great too ?

 

[ejg]

One with a twist

PGWDTi Coyote


I built this rifle for UK PRS Competitions using a new PGW Coyote action and BM putting it into a PSE Composites E-Tac stock

Bartlein 8 twist with "blaser style" fluting

Chambered in 6.5x47 Lapua

Trigger is a Bix n Andy

Scope in images is PM11 10x42, the rifle now wears a 4-16 PM11

Andy, no more excuses now. We have an international PRS style shoot in Sept 19 in our Midlands range Ireland. Would be nice to see you there... I'll try get details..
edi

 

[NAS78]

Top Rifle:

Tikka T3 CTR
Proof Research 26" 8T Steel Heavy Palma barrel chambered in 7mmSAW with APA LB brake
Manners T4A stock with CTR DBM (GAP pattern)
Sterk swept bolt handle
S&B PM2 (P4L reticle) with Badger rings
Area 419 Arca, RRS harris attachment with Harris bipod

Bottom Rifle:
GA Precision Tempest with Jewell HVR trigger
Proof Research 26" 8T Steel Medium Palma chambered in 7mmSAW with APA LB brake
Manners PRS2 stock with mini-chassis (Elite Moss pattern)
NF 4-16x42 ATACR (T3 reticle) with Badger rings
Area 419 Arca and Arcalock clamp. Atlas bipod

View attachment 6978158

Those rifles look badass man. Nice work

 

[1fliride]

Beautiful

 

[Zack_va248]

Bergara hmr in a J Allen. Triggertech diamond with hellfire brake. Seekins lows, 20 minute rail, and cronus btr 4.5-29 moa

 

[Zack_va248]

looks awesome!

My rig. Not so custom, but it's a tack driver.

View attachment 6975550View attachment 6975551

Bergara HMR Pro in 6.5 Creedmoor
Bushnell DMR IIi 3.5-21x50
Vortex .92 PMR Rings
Area 419 20 MOA Scope Rail
Area 419 Hellfire Brake
Area 419 Bipod Rail
Atlas BT46-LW17 PSR Bipod

 

[Zack_va248]

looks awesome!

My rig. Not so custom, but it's a tack driver.

View attachment 6975550View attachment 6975551

Bergara HMR Pro in 6.5 Creedmoor
Bushnell DMR IIi 3.5-21x50
Vortex .92 PMR Rings
Area 419 20 MOA Scope Rail
Area 419 Hellfire Brake
Area 419 Bipod Rail
Atlas BT46-LW17 PSR Bipod

Do these count...
View attachment 6978545

so many nice setups!

 

[SonicBurlap]

Bergara hmr in a J Allen. Triggertech diamond with hellfire brake. Seekins lows, 20 minute rail, and cronus btr 4.5-29 moa

What do you have the trigger set to?

 

[Zack_va248]

What do you have the trigger set to?

not sure. just installed it today. I backed it off probably 6-8 clicks from how it was set in the box. absolutely zero creep. definitely the best trigger I've felt. It's extremely light. I'm guessing under a lb for sure.

 

[SonicBurlap]

That's the one regret I have with my B-14 HMR. I was going to replace the trigger on my B-14 HMR with a TT Diamond just as I did with one of my Premier Bergaras that came with a Trigger Tech trigger, then (since I'm a rifle nerd) I actually read the manual and it explained that the possible adjustment range for the B-14 HMR is between 2.8 and 4.4 pounds plus the little blurb about voiding the warranty. I thought well maybe that's just for the Bergara trigger, then on the Timney web site I noticed a warning on their Remington 700 triggers not to use them in Bergaras it said: 'The Bergara rifles use a heavier firing pin spring that limits pull weight adjustability.' So I stuck with the original trigger in the B-14 HMR because the Diamond ranges from 4 oz. to 16 oz. short of the B-14s minimum adjustment. The original trigger is by no means a bad trigger, not a Trigger Tech, or even a TT Diamond but a good reliable trigger. The Trigger Tech Diamonds come adjusted mid-range so if you backed it off you should definitely be below 1 pound, I'd still get a trigger scale just to know for sure but that's just curious me. Nice rig!

 

[Zack_va248]

That's the one regret I have with my B-14 HMR. I was going to replace the trigger on my B-14 HMR with a TT Diamond just as I did with one of my Premier Bergaras that came with a Trigger Tech trigger, then (since I'm a rifle nerd) I actually read the manual and it explained that the possible adjustment range for the B-14 HMR is between 2.8 and 4.4 pounds plus the little blurb about voiding the warranty. I thought well maybe that's just for the Bergara trigger, then on the Timney web site I noticed a warning on their Remington 700 triggers not to use them in Bergaras it said: 'The Bergara rifles use a heavier firing pin spring that limits pull weight adjustability.' So I stuck with the original trigger in the B-14 HMR because the Diamond ranges from 4 oz. to 16 oz. short of the B-14s minimum adjustment. The original trigger is by no means a bad trigger, not a Trigger Tech, or even a TT Diamond but a good reliable trigger. The Trigger Tech Diamonds come adjusted mid-range so if you backed it off you should definitely be below 1 pound, I'd still get a trigger scale just to know for sure but that's just curious me. Nice rig!

Yea I read all of that same stuff. I've been looking to sell my bergara HMR so I can upgrade to a TL3/Hawk hill setup in 6.5cm. So I went ahead and got the diamond despite the potential for issues. However I did cycle the bolt/ safety and dry fire it 50 times or so trying to get a malfunction and couldn't get one. worked flawlessly. So I suppose it'll just be extreme caution to not load a round in the chamber unless pointed in a safe direction. Safety rule I follow anyhow but just a note to self.

 

[Zack_va248]

6.5 CM
Tuebor Action
Proof research 26” m24 contour barrel
Silencerco brake
NF ATACR 7-35x56 with NF rings
J Allen chassisView attachment 6978378

Looks very similar to my rifle! Upscale version though! Very nice!

 

[Mr. Z]

Do these count...
View attachment 6978545

Depends how they shoot.

 

[raider1v1]

im looking for reccomendations on paint jobs that will show off the carbon fiber, but give it some color besides all black.

• Proof Barrel - .270 Win, 22" long 1:10 twist and Vias Brake
• Remington Action - Trued
• Boltwork done by Kampfeld Customs
• Trigger - Timney 517 @ 3#
• Stock - Manners EH1 Clear Finish w/ PTG Bottom BDL metal
• Total weight 7lbs 7 3/4oz

Final step is painting by Brandon at Custom Gun Coatings

d

 

[SonicBurlap]

Yea I read all of that same stuff. I've been looking to sell my bergara HMR so I can upgrade to a TL3/Hawk hill setup in 6.5cm. So I went ahead and got the diamond despite the potential for issues. However I did cycle the bolt/ safety and dry fire it 50 times or so trying to get a malfunction and couldn't get one. worked flawlessly. So I suppose it'll just be extreme caution to not load a round in the chamber unless pointed in a safe direction. Safety rule I follow anyhow but just a note to self.

Shouldn't be an issue for the HMR Pro since they come with a standard TriggerTech trigger these days, the issue is with the B-14s with the basic Bergara action but even that one with its original trigger is fairly crisp and has only minimal overtravel. Haven't had an issue on my Premier Bergara that came with the original TriggerTech frictionless trigger that i replaced with the Diamond and I wouldn't trade that rifle in for all the rice in China.

 

[CShooter92]

im looking for reccomendations on paint jobs that will show off the carbon fiber, but give it some color besides all black.

• Proof Barrel - .270 Win, 22" long 1:10 twist and Vias Brake
• Remington Action - Trued
• Boltwork done by Kampfeld Customs
• Trigger - Timney 517 @ 3#
• Stock - Manners EH1 Clear Finish w/ PTG Bottom BDL metal
• Total weight 7lbs 7 3/4oz

Final step is painting by Brandon at Custom Gun Coatings
View attachment 6980332d

Following this post because I ordered my Manners stock the same way and now I'm wanting a little bit of color. I'm actually considering sending it back to Manners for their midnight camo job.

 

[ejg]

im looking for reccomendations on paint jobs that will show off the carbon fiber, but give it some color besides all black.

• Proof Barrel - .270 Win, 22" long 1:10 twist and Vias Brake
• Remington Action - Trued
• Boltwork done by Kampfeld Customs
• Trigger - Timney 517 @ 3#
• Stock - Manners EH1 Clear Finish w/ PTG Bottom BDL metal
• Total weight 7lbs 7 3/4oz

Final step is painting by Brandon at Custom Gun Coatings
View attachment 6980332d

I did these last week, (we don't do visual carbon) a little bit of red blobbed in-between looked very good. (better than in this pic)
edi

 

[SonicBurlap]

im looking for reccomendations on paint jobs that will show off the carbon fiber, but give it some color besides all black.

• Proof Barrel - .270 Win, 22" long 1:10 twist and Vias Brake
• Remington Action - Trued
• Boltwork done by Kampfeld Customs
• Trigger - Timney 517 @ 3#
• Stock - Manners EH1 Clear Finish w/ PTG Bottom BDL metal
• Total weight 7lbs 7 3/4oz

Final step is painting by Brandon at Custom Gun Coatings
View attachment 6980332d

I like the McMillan Coyote Ambush pattern, but then again it blends in nicely anywhere here in the Western U.S. .

 

[tree man]

im looking for reccomendations on paint jobs that will show off the carbon fiber, but give it some color besides all black.

• Proof Barrel - .270 Win, 22" long 1:10 twist and Vias Brake
• Remington Action - Trued
• Boltwork done by Kampfeld Customs
• Trigger - Timney 517 @ 3#
• Stock - Manners EH1 Clear Finish w/ PTG Bottom BDL metal
• Total weight 7lbs 7 3/4oz

Final step is painting by Brandon at Custom Gun Coatings
View attachment 6980332d

Nice looking rifle! Do you mind me asking what contour barrel that is?

 

[mcfab27]

Nice

 

[JuiceboxPNW]

What started out life as a Cabelas Exclusive Savage 10T in .308...
Barrel chamber and receiver work was all completed by JBRC in Vancouver, Wa
Trued Savage 10
Benchmark Heavy Palma Barrel 25" Finished Length, 6.5CM
Area 419 Hellfire 3P brake
Accu-Tac SR5
KRG 180-Alpha Chassis
EGW 20 MOA rail
Seekins 30mm rings
Vortex Viper PST 6-24x50 MRAD
.25" PTG recoil lug

 

[EchoDeltaSierra]

Now that she's done and validated at 1000y, thought I'd share an update on this build.

ARC Nucleus SA w/ Barloc
21" Criterion barrel in 6.5CR & MTU contour
Huber Concepts trigger
MagPul Pro 700 Chassis
Steiner T5Xi 5-26 in ADM Recon-SL
SilencerCo Omega
Atlas BT10 bipod
100% made in America
Color: black AF

It shoots 140gr ELD pills over 43.9gr H4350 @ 2794fps
(PSA: don't try this load without knowing what you’re doing)

 

[lilhank]

GA Precision Tempest
20” Proof Research with Area 419 Hellfire
Manners T5 with Gen 2 mini Chasis

 

[viking78]

Tikka T3X CTR 260rem.
Sterk bolthandle.
Timney trigger.
Ase Utra SL7i supressor.
Cole-Tac metal phyton supressor cover
Cerakoted coyote tan.
Spuhr scope mount 10mrad tilt.
Kahles K624i scope, with Vortec defender caps and Mkmachining throwlever and level on the front of the scope.
KRG bravo chassis, with KRG TRG rear stock.
Custom painted stock panels.
Atlas PRS bipod with the awesome riflesticks grabbler spiked feets with quick disconnet mounts.
MDT AICS magazine.

 

[turboek]

The current line up. Surgeon CSR, AI s/a and a Spartan built .338LM off a Badger 2013.

 

[Simia Dei]

The current line up. Surgeon CSR, AI s/a and a Spartan built .338LM off a Badger 2013.

How do you find that badger when compared to the AI? Have oh had any experience with a tempest as well to compare it to?

 

[turboek]

Haven't had any experience with the GAP, but the 2013 doesn't feel much different than the AI.

 

[Simia Dei]

Haven't had any experience with the GAP, but the 2013 doesn't feel much different than the AI.

Awesome, thanks mate, I need to try and get hands on the badger for a run

 

[issDaemon]

looks awesome!

Thanks! That J Allen has me drooling. Almost picked up the B-14 and went a similar route with it, but the Pro hit the value sweet spot for me.

 

[viking78]

Second Tikka ctr t3x 308win.
Same as the other one, but with Bravo chassis.

 

[MACHTECH]

18" barrel TacOps X-RAY 51

 

[Covertnoob5]

18" barrel TacOps X-RAY 51
View attachment 6986031

Awesome!!!

 

[winniethepooh]

18" barrel TacOps X-RAY 51
View attachment 6986031

You stole that!!!!! Good score

 

[Ware'sTacticalFirearms]

My budget build got a little out of hand!
Bighorn Origin LH
Bartlein M24 chambered in 6x47L
Bix’n Andy Tac sport 2 stage
Manners PRS1 w/ mini chassis
Area 419 Hellfire & ARCA loc rail
Atlas bt10
Kahles k525i in ARC m10 rings

 

[Precisiondada]

^^ what does it weigh?

 

[Ware'sTacticalFirearms]

Good question! I’ll weigh it tomorrow after I recover from my night shift hangover

 

[Blackfoot 7]

Remington 700 SPS Tactical AAC-SD .308, EOTech Vudu 3.5-18x50 FFP MD1-MRAD, Grayboe Renegade stock (skim bedded), Grayboe DBM, Triggertech Primary trigger, Weaver 20 MOA base, Badger rings (306-14), Badger bolt knob, Silencerco Saker 7.62 w/ Key-mo mounting system, Dead Air brake, Bradley Elite 500D cheek rest, Atlas BT46-LW17 PSR Bipod

 

[Ware'sTacticalFirearms]

^^ what does it weigh?

15.8 lbs by itself, 16 with me holding it.

 

[Precisiondada]

15.8 lbs by itself, 16 with me holding it.

Interesting... I have a similar build in process, but using a T4A Elite. Thought it would end up a bit closer to the 12-13lb range. I appreciate ya gettin the scale out!

 

[Ware'sTacticalFirearms]

You’re welcome, I couldn’t believe my eyes the first time I set it on there! I had to weigh it 3 more times just to convince myself that it wasn’t a 12-13 lb rifle.

 

[Kyle Kelly]

Surgeon 591
KRG Whiskey 3 Gen 6
S&B PMII 5-25 MSR
Trigger Tech Specialist
SilencerCo SpecWar