Already put a pic in the tread but wanted to put up a better pic. Sorry, I am in love with this shorty!!!
-
Having trouble using the site?
Contact support
This is my Tikka CTR in 308. My intention was to shoot the factory stock for a while, but I found the ergonomics to be lacking. I plan on competing in PRS this year and decided to go ahead and put the money down on the chassis and couldn't be happier.
-Tikka CTR w/ 20" barrel
-KRG Bravo Stock w/ CTR mag inlet
-KRG Spigot & KRG Harris wide mount
-Harris Bipod w/ PodLock
-Sterk Swept Back Bolt Handle and Shroud
-Athlon Cronus
-Vortex Rings
-Vortex Bubble level
-Insite Arms Heathen Muzzle break w/ .885 diamter
-SAP Two Round Holder
-Tikka CTR w/ 20" barrel
-KRG Bravo Stock w/ CTR mag inlet
-KRG Spigot & KRG Harris wide mount
-Harris Bipod w/ PodLock
-Sterk Swept Back Bolt Handle and Shroud
-Athlon Cronus
-Vortex Rings
-Vortex Bubble level
-Insite Arms Heathen Muzzle break w/ .885 diamter
-SAP Two Round Holder
Last edited:
im so close to bringing it home. Hopefully some time this week.
Thanks to all of the people who offered help and all of the other searching I did to put this together on this site. Can’t wait to finish it and try it out!
big horn origin
Proof 26” competition contour
Mdt acc
Nf nx8
Nf rings
Pva jet blast on the way
Triggertech special on the way
big horn origin
Proof 26” competition contour
Mdt acc
Nf nx8
Nf rings
Pva jet blast on the way
Triggertech special on the way
Attachments
My favorites.
Older R700 XCR long range tactical in 223. Has a factor 40x trigger in it.
New Sako A7 Roughtech A7 308. So far so good. Ordered a bolt shroud, and floorplate from Atlasworxs. Talley 20moa base on the way.
Older R700 XCR long range tactical in 223. Has a factor 40x trigger in it.
New Sako A7 Roughtech A7 308. So far so good. Ordered a bolt shroud, and floorplate from Atlasworxs. Talley 20moa base on the way.
I sold my EH1A with mini chassis and put this Bravo on the blaster until my new T2A is ready. This is a really nice little chassis! It’ll go on a budget .223 remage build when the Manners is done.
Have had it maybe a week so I am not able to say much until it goes hunting.
Its a wash. I like the action, and removable bases, trigger, and recessed crown. I like that the bolt handle isn't silver soldered to the body and is replaceable. I don't have to rely on brazing skills of a smith or modify the bolt body if I decide to change handles. Scope mount holes are aligned correctly, Stock is ok for a factory stock. It flexes about the same as any other B&C I've had. No extractor issues yet brass doesn't hit the scope and bounce back in. Most of the bolt parts are interchangeable with the 75 which is nice. The action feels better than the Tikka. The gun is well made, fit and finish are excellent. The 5 shot guarantee is a nice touch.
The floorplate and magazine on the other hand are terrible. The safety is good, though I do worry about dirt causing problems (most likely it won't).
Gun is pretty accurate, not going to judge it until I start reloading and buying quality ammo for it.
The floorplate can be replaced easily with a metal one from atlasworx, but the magazine can't. I don't think a proper DBM would really be possible due to the way the mag feeds into the gun, lugs are part of the receiver (they may be removable). I question the longevity of the floor plate from magazines being inserted and removed overtime. Since it is plastic it will probably be damaged overtime.The lugs are metal. I am going to upgrade it ASAP.
I think a modified AI single stack could work if a lug was added to the front of the mag and the rear lugs removed. The gun would have been much better served if it was sold with a hinged floorplate instead of the magazine. The magazine works and has metal feedlips, but I worry about finding replacements in the future (10 years or more).
Its getting harder to find Sako's (at least for me) in the US, and it was onsale, regularly 1299 but I got it for 799 plus tax. It felt good and was replacing a Remington 700 SPS. I wanted something with some "class". My choices were between the Tikka varmint, Kimber 8400 police , and the Sako. I probably should have shopped around some more. I liked the feel of the sako and thought I could get a DBM for it, I didn't realize that CDI precision's owner had passed. Had I known that I may have went with something else.
The gun is still eligible for some decent stock upgrades, McMillan has a few options that I like. B&C, and Boyds and some others make some inexpensive stocks that will work as well. Haven't seen a chassis for it yet.
I like it better than the cheaper R700's, Savages, and Tikka's, and ect, but that magazine design just kills it. Yes it feeds well, and isn't a problem but I do question how long the magazines will last and if Beretta will keep importing them to the US. I am tempted to mill out some aluminum blocks and make a metal bodies and followers for the mag but that's a future endeavor.
Sorry for the book and hopefully my opinions aren't too over the top.
Last edited:
The "book" is fine: more than I expected but not too much.
I suspected that many of the things that really matter will be fine but there must be something not-all-that-great in a lower cost model. There's some plastic mags out there that seem to last. My Glock mags are a bit old already, but no worse for it.
I suspected that many of the things that really matter will be fine but there must be something not-all-that-great in a lower cost model. There's some plastic mags out there that seem to last. My Glock mags are a bit old already, but no worse for it.
This rifle is going in to a 100% makeover.
There´s a fluting on a barrel, bolt andnew cerakote on the barrelled action and KRG panels.
Once the job is done,i f you want i can send new pictures of the job
That's what I am hoping, over all I put the gun up there with a lot of the higher end 700's like the 700p, vls and XCR LRT. With fit and finish and what not. We'll see tomorrow how it does with some handloads.
I just ordered a Tikka CTR 20" in 6.5 Creedmoor that I"m putting into a KRG Bravo with an aluminum W-3 fore-end. I'm very excited to see how a compact 6.5 shoots. I think it'll be a great rifle. I like your setup. After I shoot the barrel out of the Tikka I'll probably put a Proof carbon barrel on it to shed some weight.
It is just the stock Desert Tan color from Accuracy International, its the old model pre 2014
Last edited:
And I finally get to post my rifle
Zack at old dominion custom rifles absolutely gave me everything I asked for and built me a bad ass rig
Here’s how it specs out
6.5prc
Impact action
Foundation genesis
Kmw m
Zero compromise 5-27x56
Spuhr Mount
Apa little bastard
Krieger 26” m24 contour
Jewell trigger
And it weighed in at 17.7 lbs(with bipod no mag)
Zack at old dominion custom rifles absolutely gave me everything I asked for and built me a bad ass rig
Here’s how it specs out
6.5prc
Impact action
Foundation genesis
Kmw m
Zero compromise 5-27x56
Spuhr Mount
Apa little bastard
Krieger 26” m24 contour
Jewell trigger
And it weighed in at 17.7 lbs(with bipod no mag)
It's not at the level of most rifles here but I've enjoyed it anyways. Accuracy is about 3/4 MOA which is good enough for me for now.
Savage 10 FCP-SR barreled action
24" barrel / .308 Win
VG6 Gamma brake
MDT Oryx chassis
Harris bipod w/ Larue QD
Vortex Razor HD Gen II 4.5-27
Vortex Precision Matched Rings
Aadmount caps
Savage 10 FCP-SR barreled action
24" barrel / .308 Win
VG6 Gamma brake
MDT Oryx chassis
Harris bipod w/ Larue QD
Vortex Razor HD Gen II 4.5-27
Vortex Precision Matched Rings
Aadmount caps
Remington 700 SBR chambered in .300 Blackout, 8" barrel, sitting in a Black Collar Arms Pork Sword Chassis with Sig Sauer folding stock, Magpul bipod, AI mags, Vortex 1-6 Strike Eagle, Vortex Rings and YHM can. I'm getting 1,770 fps - 869 ft lbs at 50m and 1,439 fps - 575 ft lbs at 200m with my 125 gn Hornady SST handload. I hope to get it set up with a thermal and do some predator hunting soon.
Have you weighed it?Remington 700 SBR chambered in .300 Blackout, 8" barrel, sitting in a Black Collar Arms Pork Sword Chassis with Sig Sauer folding stock, Magpul bipod, AI mags, Vortex 1-6 Strike Eagle, Vortex Rings and YHM can. I'm getting 1,770 fps - 869 ft lbs at 50m and 1,439 fps - 575 ft lbs at 200m with my 125 gn Hornady SST handload. I hope to get it set up with a thermal and do some predator hunting soon.
10.6 lbs with can attached. The YHM suppressor, with Cole Tac wrap, is 2.1 lbs alone. SS model rated for .300WM.
The twins and one is up for adoption.
338LM Rogue Imp and 300 NM ,both built on Defiance tactical actions, Broughton 5c barrels and paired with AICS Legacy CIP stocks
338LM Rogue Imp and 300 NM ,both built on Defiance tactical actions, Broughton 5c barrels and paired with AICS Legacy CIP stocks
Tikka T3X CTR 20” 6.5 Creedmoor in a KRG Bravo stock, flawlessly running AI mags. Anarchy outdoors swept back bolt handle with titanium knob. Mountain tactical 20MOA rail, Leupold MK4 rings, and a Leupold MK5HD 3.6-18 scope. I’ve got a Timney trigger on the way. Going out to break in the barrel today if the snow lets up.
Attachments
Last edited:
Very niceI'll get this thread started again
26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory
Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings
Very nice I’ve had josh put together a 300 prc for me and love it I’m sure you love yoursPatriot Valley Arms Build
Bighorn TL3
Rick Creek 26" 6.5 creedmoor 1/8"
PVA Mad Scientist brake
McMillan A5 adjustable in McMillan camo
atlas PSR
Badger M5 Enhanced DBM
Vortex Optics Gen ii 4.5-27x56
Vortex PMR 0.92"
Manfrotto ball head/tripod
Hogsaddle
Sent from my iPhone using Tapatalk Pro
Which mag are you using with your Oryx and does it fit perfectly or slightly off? I am running the PMAG 10 7.62 AC (AICS pattern) mags in mine (Savage action) and they fit "ok", but drag a bit in the magwell and it takes a little more push than I like to lock it up solid. They all have little worn grooves where they are little too tight in there.
It's MDT's new poly/metal mag. It fits perfectly. I also have a pmag that doesn't fit that well.
Hi,
Just unpacked a couple of them from Shot Show....
Sincerely,
Theis
Just unpacked a couple of them from Shot Show....
Sincerely,
Theis
Mine with brand new stock from @ejg ?
- Tikka T3 CTR .260 rem 20”
- PSE Composites E-Tac 4 CTR mil-spec with ARCA-rail
- Falcon Optics M18+ 4-18x44
- Warne X-Skel
- Harris kind of bipod and chinese M-lok to sling stud adapter
- VTAC wide padded upgraded sling
- GrovTec Heavy Duty Push Button Swivels
- Jaki Semi Classic supressor
- Tikka OEM metallic bolt shrout
- Chinese bubble level
It started as a low budget rifle but it’s getting awesome. Falcon is obviously next thing to upgrade. I have a Spuhr SP-4601 waiting for Steiner, S&B or Kahles and Falcon will continue service at the top of my P94S where cantilever mount will suit nicely. I also have an ACI which I will install to Spuhr.
At some point I will have a lighter Ase Utra supressor, some quality bipod and maybe a Sterk bolt handle but I still like to keep my budget and try to avoid bling bling. Anyway I want to use only quality parts! It’s all for purpose not for show ?
- Tikka T3 CTR .260 rem 20”
- PSE Composites E-Tac 4 CTR mil-spec with ARCA-rail
- Falcon Optics M18+ 4-18x44
- Warne X-Skel
- Harris kind of bipod and chinese M-lok to sling stud adapter
- VTAC wide padded upgraded sling
- GrovTec Heavy Duty Push Button Swivels
- Jaki Semi Classic supressor
- Tikka OEM metallic bolt shrout
- Chinese bubble level
It started as a low budget rifle but it’s getting awesome. Falcon is obviously next thing to upgrade. I have a Spuhr SP-4601 waiting for Steiner, S&B or Kahles and Falcon will continue service at the top of my P94S where cantilever mount will suit nicely. I also have an ACI which I will install to Spuhr.
At some point I will have a lighter Ase Utra supressor, some quality bipod and maybe a Sterk bolt handle but I still like to keep my budget and try to avoid bling bling. Anyway I want to use only quality parts! It’s all for purpose not for show ?
Last edited:
Fired a shot yet?
What do you think of the arca rail? You are one of the first to have one.
edi
Part List:
- APR G2 action
- Criterion Arms Savage Prefit, 22", 6.5 CM, 1-8, Medium Palma
- Grayboe Ridgeback Woodland Camo
- Grayboe Bottom Metal
- Bix'n Andy 2 Stage Tacsport adjusted to 12 oz
- Viper PST Gen II 5-25x50 FFP
- Vortex Matched Rings 0.97" Tall
- Atlas bipod and Midway USA rear bag
- Muzzle brake is TBD
- Weighs about 13 lbs unloaded, but I wish it where a bit heavier. The CG is just a touch too far back, so balancing the rifle on a bag while shooting off of barricades is tricky. A 24" barrel would have probably solved this problem. Only got to shoot about 250 rds through it last summer because my club's 600 yard range has been closed :/
Last edited:
No I haven't shot it yet. I'll wait for a spring and snow to melt away. It's a bit difficult to shoot at winter because most of places are behind a lot of snow
I might need to shoot my bear hunting test within few weeks but it's 4 shots to 17cm circle from 75 meters ~7.8MOA so not much shooting there.I don't use ARCA-rail yet for anything else than bipod which is attached using M-lok in the middle of the rail. I will try tripod some day and I wanted to be ready for that hence the ARCA rail. However I really like the ARCA-rail implementation. It's solid base for bipod installation and it fits very well into the stock. It's also nice to have M-lok in the rail so there is plenty of adapters and bipods suitable to install into ARCA or M-lok. I'm happy that I waited to get ARCA. It's perfect for my need!
The stock itself is also a beauty and fits my hand very well. I might prefer it over OEM TRG stock which is awesome! I just need to take a scope bit more back but not yet because I want to keep zero for that bear shooting test. I think that I can do 7MOA even though a scope is not in the perfect spot
Best option would be new scope to perfect spot a bit later before summer.
Same 300 WM GAP I posted earlier in the thread. Just got it mounted in the Cadex this morning
Sako 85 Varmint Stainless .308
Mcmillan HTG.
Optilock bases, spuhr hunting rings.
Atlas forend rail.
Nightforce NXS 2.5-10x24 with Mildot reticle
TAB sling
Parts List:
Barreled action by Southern Precision Rifles
Defiance Deviant with 20MOA integral rail Fluted bolt
Bartlein 1-9 twist 28" chambered in 300PRC spiral flute
APA Lil'B timed and then blended to barrel contour
Trigger: TriggerTech Diamond Single stage set to 1.2lbs
Chasis: MDT ACC LA with Vertical Grip and non-folding stock
MDT MLock fore end weights x 2sets
MDT Bag Rider: Steel
Mags: MDT 300WM CIP
Bipod: Atlas CAL with Area 419 ARCA mount
Hoptic Cheek riser pad
Hoptic Quiver - 2 Round
Scope: Temporary: Vortex Viper PST 3-18
Scope caps Defenders
Scope rings: Temporary Vortex Pro
MK Machine Turret Magnifier
MK Machine Throw Lever
Paint Krylon Camo FDE, TAN, Brown, Green
Brass: Temporary: Hornady
Bullet: 230grain Hornady A-Tips
Powder: Undisclosed measure of VihaVuori N565
Chrono: MagnetoSpeedV3: ~2931fps
Hopefully in a few months when the ZCO 5x27's with the MPCT3 reticle are released to vendors...I'll have one from @CSTactical with a base Cerakote of FDE mounted in a Spuhr mount with an additional 20MOA cant and some nice Tenebraex covers.
Last edited:
