precision rifles... show em

[[email protected]]

ACCURATE ORDNANCE
Pierce titanium action, carbon wrapped barrel

R700, MCM A3 stock

 

[tigerfan_9]

My first custom rifle built by Roscoe at LA Precision Rifles and stock paint by shortbus at customguncoatings.com.

Trued LH Rem 700
26" Krieger 1:8 5R Med Palma
JEC brake
Surgeon DBM
Manners T2A
Seekins Rings
Vortex Razor

 

[Pink_Mist]

[URL=http://s202.photobucket.com/user/aolson81/media/IMG_20130517_121634_215.jpg.html]

Remington 700SA Blueprinted, .308 Obermeyer Chamber, 20" Bartlein 1-11.25 5R (1.25 -1" AMU Contour by Accuracy Unlimited Medford, WI
Kinetic Research Group Whiskey 3 (Gen II Folder) Chassis (Magpul Foliage Green) Leupold VXIII Custom Shop 6.5-20X40 30mm M1-TMR mounted with ADM Recon Badger Knob
Rifle Basix (28oz) Tubbs firing system Accu-pod monopod, Harris 6-9 knotched w/ Phoenix Claws

 

[EOD350]

I'm a little late to the dance LOL, but this is my two. Top one is a .260 Remington, bottom is a .300 I just finished.

 

[s002wjh]

lots nice bling here

 

[sidewaysil80]

My first and only precision rifle. I opted for some bells and whistles but overall it's fairly conservative.

 

[hognuts]

Here are a few of mine.


6.5 SAUM still needs some Cerakote to make it "look pretty" Looking forward to see how this one develops! Just got the first few rounds through it today.


Barrett model 99 50 BMG on the left, Remmington model 770 30/06 on the right with Nightforce 5.5x22x56 on the right

Put the 770 to work!

Put the Barrett to work....against Bambi!


6.5 Creedmoor



Putting the Creedmoor to work!

 

[sidewaysil80]

Holy shit the location on the 9/2010 picture is absolutely stunning! Where is that located? Great collection too btw!

 

[mobius i]

I know it's not extremely pretty, but it's mine... and it shoots lights out!

 

[hognuts]

Holy shit the location on the 9/2010 picture is absolutely stunning! Where is that located? Great collection too btw!

It was amazing country! That was in the Absaroka Beartooth Mountains in Montana. We did a drop camp up there with Absaroka Beartooth Outfitters out of Big Timber Montana. Spent 8 days in some of the most beautiful country in the world.

Shot my bull later that same day with the 30/06, it was a funny story, the outfitter who dropped us off thought we were fucking nuts for humping that fifty around in that steep ass country. I hiked it in the day before opening day and set it up on a burn area at about 9000 feet. I set up a separate camp and just left the fifty at that spot. We sat on that burn until mid-day where we could see a good 1200 yard area with no luck. We left the fifty at the "secondary camp" and hiked up on top at noonish (figuring nothing would be moving in the middle of the day) The guide had told us that up on top (10,000 feet elevation) that we "may" be able to get cell coverage.

So we hiked up there to see if we could call the wives. I took the 30/06 up there as it is light to carry. We got to the top and were walking around on the top of the ridge like dipshits with our cell phones up in the air trying to "get a bar of coverage" and we spotted a bull way out in the distance, out of our range with our hunting rigs. Probably around 1200 yards, it was an early season rifle hunt in the back country of Montana and the elk were still in the rut, so we were able to bugle him in. I dropped it at 300 yards, he was charging in fast and was ready to kick our ass!

We were able to get a text out from up on top letting the guide know we had a bull down. When he came in he very excitedly asked us if we "had got it with the fifty?" When I told him no, he was very disappointed, he said, "everyone in town was rooting for you crazy bastards humping that fifty around in this country!" That was an amazing hunt, first time that I had seen a bull get called in-in person, I have seen the archery guys do it on the hunting shows, but most rifle hunts the rut is long since over with, it is something to behold seeing a nice bull come in stomping at the ground and raking trees with his antlers and wanting to kick your ass! Good stuff!

 

[KL1CK]

.308 Win

Just got it back together with the new knob

 

[cetmeguy]

Rem.700 SPS AAC SD .308 with XLR carbon chassis.

 

[blackriflecollector]

.308 built on a Stiller TAC 30 action by Tooter Meredith of Rogersville, AL
Manners T4 mini-chassis in Multicam
Fluted Bartlein Barrel, threaded
SS 5-20 HD in Badger low rings
Cerakoted in Burnt Bronze

I haven't worked up a load for this one yet, but it did pretty well with 168 gr FGMM (.565" group after only 10 rounds through the rifle). It's a joy to shoot compared to my other Rem 700 in .308. The extra weight really helps with the recoil.

EDIT: I worked up some loads using Varget and 168 gr SMKs. It seems to like light loads as my best group came at 40 grains.

 

[Garvey]

Savage 10, McMillan A-5, CDI bottom metal, Obermeyer chambered in .260, SWFA SS 5-20x, Tiger Shark suppressor.

Pic was right after I got the can in January



And this one was a month later in Dickens Texas. 300 yards and heard the bullet smack him.

 

[Luke.Nukem]

 

[Shaun223]

My first precision rifle. Rem 700 sps aac-sd, bedded b&c stock, Harris Bipod. Jewell trigger, seekins rings, 20 moa seekins base and a vortex viper pst 6-24×50 ffp

 

[jugi16]

Here's mine....PGW Coyote in 260 Rem.

 

[s002wjh]

alot nice pics

 

[AGENT-X]

Picture taken right after I painted it. It's a bit darker in person.

 

[Skyyr]

This photo is absolutely stunning. I really wish there was open shooting grounds like that here.

 

[JayCarver]

Here's mine....PGW Coyote in 260 Rem.

Nice Stick! What shooting mat is that?

 

[jugi16]

Blackhawk pro shooters mat.

 

[Capt Academy]

Some great looking rifle here! Here is my Allen 338 Lapua

 

[Capt Academy]

Here is my RBros 7mm Mag

 

[Petrov]

Rem700 worked over by Dark Eagle Custom

 

[hintonrc51]

Updated

6.5X47 Lapua
Defiance Action RB/LP
Hart 1-8 barrel
Seekins base and bottom metal
MCM A5 stock
S&B 5-25 MTC H2CMR
APA 34mm 1.125 rings
Triad Stock Pack
S.O Tech front pad

 

[meathunter1]

Pretty new to the site and this is my first precision rifle so far.....
Remington 700 LA trued
Schneider MTU Barrel in. 308 win
Badger high rings and 20 moa base
Nightforce 5.5-22*56 nxs
HS Precision stock.
Apparently not smart enough to post pics. Its not much compared to alot of the fine instruments on here but its mine and I love shooting it!

 

[RodgerC]

Savage Model 10 FCP-SR in .308. Outstanding gun to shoot.

 

[JaysonF]

Motto savage, nice

 

[Papa Zero Three]

Just got this back from Phoenix Custom Rifles. PCR put the barrel on and Cerakoted it along with other gun smithing services to make it what it is, a work of art. PCR really goes the extra mile by doing a lot of little extra things that most smiths wouldn't think of doing or over look on a build.

AICS 1.5 Chassis
Bighorn Action/lug
Timney trigger
Bartlein 20" 5R, threaded, 1/10twist, M24 contour
Cerakote FDE

 

[Apache659]

My rig is probably a little dated compared to what some of you guys are shooting. It was the best I could afford at the time ...

McBros Custom Winchester Model 70 (1994 Revision) .300 Win Mag
McMillan A3 Tactical
Schneider Barrel
Leupold Mk IV 10X
Warne Rings
Jewell Trigger
Parker Hale Bipod



Hopefully soon it will have a CDi DBM conversion and a 3 Port Muscle Brake ...

 

[vszero]

.308 Win

Just got it back together with the new knob

what kind brake is that, it looks awesome

 

[Liquidmetal]

My latest, just finished this one this morning. A budget build of sorts. I rarely post here, but read this forum every day. A wealth of good info to be had here.

Howa .308 with a 20" heavy fluted barrel
B&C Medalist A2 stock
Triad Tactical stock pack
ATI DBM kit
Ken Farrell 10 MOA base with Burris XTR rings
Leupold Mark AR Mod 1 6-18x40 Mil/Mil scope

 

[1legmont]

here is my recently built 6XC
sako L579 action
hart 1-7tw RV contour 26 inches
stock, claro walnut. Custom-built, Joel Russo
Leupold 6.5X20 boosted to 36X
S&K rings and bases
gunsmithing done by Ted's custom shop LLC, Oklahoma

Just got this back and haven't worked up a load for it yet. My intentions are shooting the 115 gr Berger


Photobucket

Home
Library
Connect
Browse
Edit
Upload

1legmont

Help

Your Library

Links to share this photo
IMG

Photobucket

Home
Library
Connect
Browse
Edit
Upload

1legmont

Help

Your Library

Links to share this photo
IMG

Photobucket

Home
Library
Connect
Browse
Edit
Upload

1legmont

Help

Your Library

Links to share this photo
IMG

Photobucket

Home
Library
Connect
Browse
Edit
Upload

1legmont

Help

Your Library

Links to share this photo
IMG

 

[1legmont]

well I guess that didn't work. Disregard the above screwup

 

[GeKados]

 

[Bob L Swagger]

4 Gradous rifles / 1 Surgeon Scalpel:

(Specs from front to back)


Gradous Rifles
Surgeon 591R
Surgeon DBM
Bartlein #3 5R 1:8" finished at 24" .160 FB reamer 6.5x47 Lapua
Jewell trigger
McMillan A3 Sporter stock 50% olive / 25% black / 25% tan
All metal Cerakoted flat dark earth
Nightforce NXS 5.5-22X50 MOAR HS ZS
Nightforce .885" UL rings
Holland bubble level
Atlas v8.1 bipod
TAB gear sling


Gradous Rifles
Surgeon 591R
Surgeon DBM
Krieger 5R MTU 1:8.5" finished at 25.125" .160 FB reamer 6.5x47 Lapua
Badger Ordanance FTE Brake
Jewell trigger
McMillan A5 stock w/ KMW ACP 50% olive / 25% black / 25% tan
All metal Cerakoted flat dark earth
Nightforce NXS 8-32x56 NPR1 HS ZS
Nightforce 1.00" UL rings
Holland bubble level
Atlas v8.1 bipod
TAB gear sling


Gradous Rifles
Surgeon 1086R
Surgeon DBM
Krieger 5R MTU 1:10" finished at 24" .300WM
Badger Ordnance FTE Brake
Jewell trigger
McMillan A5 w/ KMW ACP GAP camo
All metal Cerakoted flat dark earth
Nightforce NXS 5.5-22X56 MOAR HS ZS
Nightforce 1.00" steel rings
Holland bubble level
Atlas v8.1 bipod
TAB gear sling



Surgeon Scalpel
Surgeon 591R
Krieger 4 groove MTU 1:8" finished at 27" 6.5x47 Lapua
Jewell trigger
AI AX chassis OD green
All metal Cerakoted flat dark earth
Nightforce ATACR 5-25X56 MOAR HS ZS
SPUHR SP-4006 mount
Atlas v8.1 bipod
TAB gear sling


Gradous Rifles
Surgeon 591R
Surgeon DBM
Bartlein 5R MTU 1:10" finished at 20" .308 win
Jewell trigger
McMillan A5 w/ KMW ACP Tan, white, yellow, grey (not sure of percentages)
All metal Cerakoted flat dark earth
Nightforce NXS 5.5-22X56 NPR1 HS ZS
Nightforce 1.00" UL rings
Holland bubble level
Atlas v8.1 bipod
TAB gear sling

 

[redneckbmxer24]

Well that's what $35K looks like. Very nice rifles.

 

[Bob L Swagger]

Well that's what $35K looks like. Very nice rifles.

Shussssssshhhhhh! I told my wife they were only $500 each!

 

[redneckbmxer24]

I wish my girlfriend would believe me, I guess I'm just a bad liar.

I just went to Stockys and ordered an A5 in the same color pattern as your 6.5x47L build. I don't know what I'm going to put in it, but I'll have one.

 

[Scotty22]

Well that's what $35K looks like. Very nice rifles.

I would venture to say that might be a tad over 35k. And that I'm super jealous

 

[saleen63]

Super nice collection Bob L Swagger. I will be heading to the Gradous's on the 15th to get the 280AI he is building for me.

 

[C45P312]

 

[nic_bravo_whiskey]

Shussssssshhhhhh! I told my wife they were only $500 each!

Ha ha, good one.

 

[S12A]

that is the best photo i have seen in ages... rifle specs?

 

[rideHPD]

Is that an SSR? Looks SOCOM issue.

 

[alnkal00]

"The Honey Badger" by Woody of X-Ring Accuracy

M2008 gen2
PCR 1.25" bolt knob
Rock Creek 26" m24 11.27
SS 5x20, AADmount rings
Viper Skins, 10rnd AW mag
Timney 517 straight, Atlas
Templar Tact Archangel

 

[noconabrian]

Been browsing this forum for a little bit, figured I'd join and post up.
Winchester Model 70 22-250

 

[jpolansk]

Here is a couple of pictures of my 338LM.

 

[Cosmoline]