I occasionally grab barrels for my private stash when I get reports of exceptional accuracy from certain batch, or perhaps a remarkable batch of steel, or just some other unusual circumstance. In some instances the barrels are brought in for projects that never happened, and sometimes merely to contribute to the "collection"
Ive had many of these barrels for years, and feel like they can be "turned loose". Please note that contours and lengths may not be exact, and some barrels may not have breech stamping. All barrels are stainless steel, none of these barrels are seconds, rejects, etc. I will provide comments or information when available on each blank
The barrels will be listed here because I don't want to make special line items for each one on the website as none of these are "standard inventory barrels".
-you can post here if you want something
-I don't want any trades
-I don't want to barter, haggle, etc. it is what it is
-Shipping will be $15 for one barrel or $10ea for multiples
-I am far more available by email but will try to check this once a day ([email protected])
(1) Brux 6mm/8tw 4G .236 Light varmint 30" interrupted fluting to 28" $350
(1) Rock Creek 6mm/8tw SS 4G .236 cut rifled AMU 30" $325. this barrel came from a remarkable lot of Crucible steel before crucible went out of business
(1) Bartlein 6mm/13.5tw 4G .237 #16 24" $320
(1) Mullerworks 6.5mm/8tw SS 4G cut rifled Heavy Varmint 26". $350 one of the first barrels that came off the Pratt rifler at MW, I was sent a sample barrel that was so extraordinary I asked if he had any more from the same batch
(1) Mullerworks 6.5mm/8.5tw SS AMU 31" 6 deep flutes stopping at 22" $300. This should be a button rifled barrel from crucible steel
(1) Mullerworks 6.5mm/8.5tw 4G Ashbury taper 29" $275. heavy fluted for 25-26" finish, similar to a max heavy varmint contour. this is a button rifled barrel
(1) Rock Creek 6.5mm/8.5tw SS 5R M24 29" $300. from crucible steel
(1) Rock Creek 6.5mm/8tw SS 5R AMU 29" $350 from crucible steel
(1) Criterion 6.5mm/8tw SS M24 27" $150 SOLD
(1) Bartlein 6.5mm/8.2tw SS 4G HV 33" $380 special ordered for a 6.5x284 I never did
(1) Obermeyer 7mm/8.75tw 5R AMU 29" fluted for 26" finish $450 from an excellent batch of barrels, .2755 bore before he switched to .274 bore
(1) Rock Creek 7mm/9tw SS 5R AMU 30" $325
(1) Bartlein 7mm/8.7tw 4G HV 33" $380. for a 284Win I never did
(1) Bartlein 7mm/8.7tw 5R Rem Varmint 29" fluted for 26" finish $475
a set of obermeyer 30 cal barrels , both 10tw 5R, S/N 19999 M24 27", S/N 20001 Rem Varmint 27". I asked Boots for serial number 20,000 but he wanted to hang that on the wall in his shop. $700 for the set SOLD 168BT
(1) Criterion 30/11tw Rem Varmint 27" $150 SOLD LennyO
(1) Kostyshyn 30/10tw 6G Rem Varmint 27" $275. this is a button rifled barrel made from crucible steel SOLD
(1) Benchmark 30/10tw 5R M24 27" $300
(1) Rock Creek 338/9.4tw Ashbury contour 5R 29" fluted $250. This is similar to a heavy palma with a loong breech cylinder. could be used for DTA SOLD BUTLER12
(1) Rock Creek 338/9.4tw 5R 1.350 breech heavy palma type contour, fluted for 28" finish. $350 would make a nice Lapua barrel SOLD FIXR
(1) Rock Creek 338/10tw 5R 1.350 breech AMU 31"$350
(1) Obermeyer 338/12tw 5R AMU 35" fluted for 34" finish $200 SOLD 168BT
Ive had many of these barrels for years, and feel like they can be "turned loose". Please note that contours and lengths may not be exact, and some barrels may not have breech stamping. All barrels are stainless steel, none of these barrels are seconds, rejects, etc. I will provide comments or information when available on each blank
The barrels will be listed here because I don't want to make special line items for each one on the website as none of these are "standard inventory barrels".
-you can post here if you want something
-I don't want any trades
-I don't want to barter, haggle, etc. it is what it is
-Shipping will be $15 for one barrel or $10ea for multiples
-I am far more available by email but will try to check this once a day ([email protected])
(1) Brux 6mm/8tw 4G .236 Light varmint 30" interrupted fluting to 28" $350
(1) Rock Creek 6mm/8tw SS 4G .236 cut rifled AMU 30" $325. this barrel came from a remarkable lot of Crucible steel before crucible went out of business
(1) Bartlein 6mm/13.5tw 4G .237 #16 24" $320
(1) Mullerworks 6.5mm/8tw SS 4G cut rifled Heavy Varmint 26". $350 one of the first barrels that came off the Pratt rifler at MW, I was sent a sample barrel that was so extraordinary I asked if he had any more from the same batch
(1) Mullerworks 6.5mm/8.5tw SS AMU 31" 6 deep flutes stopping at 22" $300. This should be a button rifled barrel from crucible steel
(1) Mullerworks 6.5mm/8.5tw 4G Ashbury taper 29" $275. heavy fluted for 25-26" finish, similar to a max heavy varmint contour. this is a button rifled barrel
(1) Rock Creek 6.5mm/8.5tw SS 5R M24 29" $300. from crucible steel
(1) Rock Creek 6.5mm/8tw SS 5R AMU 29" $350 from crucible steel
(1) Bartlein 6.5mm/8.2tw SS 4G HV 33" $380 special ordered for a 6.5x284 I never did
(1) Obermeyer 7mm/8.75tw 5R AMU 29" fluted for 26" finish $450 from an excellent batch of barrels, .2755 bore before he switched to .274 bore
(1) Rock Creek 7mm/9tw SS 5R AMU 30" $325
(1) Bartlein 7mm/8.7tw 4G HV 33" $380. for a 284Win I never did
(1) Bartlein 7mm/8.7tw 5R Rem Varmint 29" fluted for 26" finish $475
(1) Benchmark 30/10tw 5R M24 27" $300
(1) Rock Creek 338/10tw 5R 1.350 breech AMU 31"$350
Last edited:
