probably another dumb question

[phillip61]

I have a custom 308 that would most resemble the Army M-24. I've only put 40 rounds down the tube (it was used when I bought it)the best 10 round grouping so far has been around .80". The stock doesn't feel very comfortable to me. I really like the Mcmillan A5 and the Manners T4 style stocks. My question would be if I got someone very reputable (Jered Joplin, GAP) to change stocks along with a bedding job would the accuracy improve, stay the same, decline?

I don't know much if anything about this and any info you guys might give would be great. Thanks in advance for your input.

 

[roggom]

Re: probably another dumb question

Stock and bedding are variables with regard to accuracy / groupings. A different stock and bedding may change your harmonics, and your groups may open up. On that note they may also get tighter. If you reload, then it would be a simple matter of working up a load for your rifle. A good bedding job will mitigate heat drift and pressure points along your barrel. So most times bedding helps to aid in accuracy.

I guess the short answer is, you will not know until you shoot it.

 

[ORD]

Re: probably another dumb question

Basic answer...it depends.

It is POSSIBLE that your accuracy would improve with a change in stocks. I say "POSSIBLE" because if the current stock does not fit you properly (or is "uncomfortable"-feeling to you) then it could very well be having a negative impact on the potential accuracy of the rifle in your hands. If you can't get comfortable behind the rifle or you find yourself constantly trying to adjust your position behind it, then I'd say a new stock may be warranted and could possibly improve your accuracy with the rifle.

As far as "hurting" the accuracy goes...it highly doubt it. Having a qualified, well-regarded smith give your rifle a once-over and then having them install a new stock/do a bedding job isn't at all likely to have a deleterious effect on its accuracy potential.

 

[The Surgeons Ghost]

Re: probably another dumb question

Short answer

Yes accuracy should improve.

No it will not decline if done right.

 

[matthias]

Re: probably another dumb question

i think you really need to get out and shoot another gun and make sure you know what you think you want. then after that go to a known reputable smith and have them help fit the new stock or modify your stock to fit you better.

as for groups shrinking ergonomics are a big deal. if you feel like the gun fits you will be more confident giving yourself the best chance of shooting well. with a good smith any changes done to a rifle should not affect accuracy if done well.

hope this helps

 

[phillip61]

Re: probably another dumb question

My current stock (A Chet Brown) has a Adjustable LOP, But I don't know what my correct length should be. And don't know the correct way to measure it.

 

[ORD]

Re: probably another dumb question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: recondo84</div><div class="ubbcode-body">My current stock (A Chet Brown) has a Adjustable LOP, But I don't know what my correct length should be. And don't know the correct way to measure it. </div></div>

Get behind the rifle and adjust it until it "feels right" for you is probably the best way to go about it. Don't get caught up in all the measuring, etc.

That said...here's one of many threads on proper measurement of LOP:

https://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2474364

 

[RTK]

Re: probably another dumb question

For rifles I find a length that is fairly comfortable in all shooting positions but maybe not the best for a particular position.

I shoot a lot more shot gun than rifle and tend to run short LOP because during duck season it is easier to mount the gun with heavy cloths on and not catch on it. In summer/fall shooting trap, skeet, doves, pheasants, etc. the pull "seems" a little short but I would rather adapt than change. With Continuous changing I have too re-learn and that seems to degrade my marksmanship. It is just like picking up a different gun everytime you go out, you are much better off shooting one gun and knowing it.

 

[stalski]

Re: probably another dumb question

If you find a stock that fits you better, your accuracy will improve.

Uncomfort = unease = inconsistency

 

[LanceS4803]

Re: probably another dumb question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: stalski</div><div class="ubbcode-body">If you find a stock that fits you better, your accuracy will improve.
Uncomfort = unease = inconsistency </div></div>

Strange, but true. Mental attitude affects accuracy potential.