Well i felt i should address at least some of the comments made on this thread, number one being the rifle blowing up. This isn't second or third hand information as I was the guy who pulled the trigger. ill give a brief description of the events that transpired and my thought process while working through what i initially thought was a run of the mill malfunction.
Last stage of the day for me, started off with a great day one and a terrible start to day 2, i only say this to further depict my mindset during the aforementioned events.
COF called for 12 shots, 6 positions, 2 shots each, i made it through the first 3 positions skipping the 4th not to get hung up on time, once i knelt down and got behind my rifle on the barricade, i pulled the trigger, and nothing happened, because the rifle was supported on the barricade it stayed in my shoulder pocket and i simultaneously ran the bolt and removed the mag. in doing so i saw a live round fall out of the magazine well area ( later realizing that this live round was stripped from the magazine and not the chamber) I rotated the rifle over 45 degrees and visually inspected the chamber, chamber was clear (obviously i cannot look into the bore from this position) i re-inserted the mag chambered a round which was hard to seat (ill describe lower why i thought this wasnt an issue) got back on target then promptly got blown back 180 degrees on my hands and knees. Initially i thought my face was gone, and RO's and people around me can attest to this because that was the first words out of my mouth, "is my fucking face gone?" was my inital question. Once i Knew that my face was intact i stood up and wiped the blood from my face (gun powder lodged in it), and proceeded to try and understand what had just occurred.
WHY? why did the above happen to me, and why did I act the way that i did?
First and foremost, throughout the match i recall having 6-8 rounds that were hard to chamber, whether it being a headspace issue or a differentiation in bullet seating depth, or variances in bullet length i do not know as those rounds were fired successfully.
Secondly the weather conditions we experienced on day two was on and off rain and gusting winds at time, I like everyone else have experience that in wet and dusty conditions actions will bind and have trouble feeding without any regularity or predictability.
Thirdly in the process of performing a remedial action to get the gun back up and running, i stripped the mag and a live round fell out, at the time i believed this to be the "problem" round and visually inspected the chamber noting nothing as it was clear and free of any debris, obstruction.
After the gun blew up and we started investigating the cause of said anomaly, it was determined that a round without propellant seated the bullet into the lands far enough for me to be able to load another round behind it. it was a squib for sure as both bullets are still in the barrel.
Obviously there's a bunch of lessons learned here and i consider myself very lucky to not be maimed or dead. ill leave you guys to discuss what i've written and answer any questions as best as i can. The only issue i take is anyone saying they could've stopped what occurred to me, you'd have to be some sort of genie to tell me what was about to happen, and if you could of and didn't, We'll have an even bigger issue.
-Luke