It's hard to tell from the pic, but it looks like they may have polished the barrel after the threads were cut and got too aggressive on the end. I'd be more concerned that it doesn't look like the cap seats against the shoulder squarely and has a gap. (Unless you didn't screw it down all the way for the pic). If that's truly the case, double check for bullet clearance before firing a shot if you do install a brake. Also, what are those marks on the crown end?
-
Having trouble using the site?
Contact support
PVA Status Updates: Hancock Rifle & NUCLEUS Barreled Action
- Thread starter bohem
- Start date
- Status
Reese I just went and double checked your order. Nowhere in it is any mention of any kind about a 1/2-28 thread. If you want to change it now we can still do that but you would need to send it back in.
Your barreled action was not actually ordered as a 223AI, it was not an option of the original deal. You used the order notes to tell us that you wanted a 223AI (not an original caliber offered). We did it without any surcharge, as discussed, because of the lengthy wait involved to get the receivers.
As @spife7980 said, the caps are provided as a FREE accessory. Your order stipulates that you dont want a blended cap, or a muzzle brake.
The 5/8-24 thread is, by far margin, the most popular thread for precision rifle barrels in the North American market. There are literally hundreds of brakes available on the market in 5/8-24. Including, I might add, the Jetblast brake that we make. Then again, the Jetblast comes in 1/2-28 as well.
The odd cut you mention is called a chamfer. The chamfer functions as a protection against damage to the shoulder edge such that a ding wont leave a raised location and cause an eccentric misalignment to the muzzle device being used. In my time making rifle barrels I have seen a number of ways that field-created damage can cause accuracy issues or thread problems. A damaged shoulder is one way that has been shown to gall and misalign. So therefore we remove the possibility of it happening. Same root cause as to why we use a truncated lead thread on all muzzle threads, user level damage protection.
The barrel is contoured to maximize grip with the workholding. We covered this in this thread a couple times. For years we have done things this way, performance is never in question, and it can rarely be seen except by measuring sequential marks along the length.
@Ksracer the only marks I see near the crown appear to be latent dirt, some kind of fuzz or something, there arent any machine marks on there. The muzzle threads come lightly greased prior to final assembly and shipping. Dry SS threads are notorious for galling together therefore parts are always greased for assembly.
If there is anything else you do not understand about your barreled action I would be happy to explain it to you. It seems that your expectations and your actual order differ, and since we work to the actual order I want to clear this up. Publicly posted screenshots are available if need be.
Last edited:
O and I would like to see the email that says you would do the ai chamber for free because of the long wait.... I dont remember getting that one? Had I know it was a normal surcharge I would have more that willingly paid it... but that was never brought to my attention
That was noted on a phone call record. "Cust. requested 223AI. Called, confirmed accurate. No charge, delay. JJ"
I will have a conversation with Jeremy about the thread pattern. That is nowhere on the order. To that end: Again, if you want that fixed we will gladly take care of that. As to the concerns about finding a brake for the existing thread pattern that is a non-issue as the 5/8-24 is significantly more common that 1/2-anything.
@jcwarrior87 Josh brought this to my attention this afternoon. I sincerely apologize for my mistake on this. I should have caught that and amended your order in the production schedule accordingly. I will send over a call tag via email now and once we receive it we will turn it around the same day.
Can't ask for much more. They owned the mistake without any excuses. Offering to make it right. Yes it's a delay, but they are offering to correct it. Mistakes happen, it's how it is settled that shows if a business really cares about their customers or their margins.
Well done.
2 Order 241? 6.5 CM BA picked up today at my FFL
looks good will try it out this week end
looks good will try it out this week end
Just a 'little' observation...You get more flies with honey...Your tone??? A 'little' snarky...But then I'm 'Old School' JMHO, YMMV
So, just out of curiosity,
In 1 week it will be 12 months from the date of order. I have received email requesting final payment. Sent FFL info and paid in full. Next day contacted PVA and was informed that no FFL info was on file. Stopped by my dealer and had him re-submit all info again. Called to confirm and they have received everything that was required on my part.
Little delay due to muzzle brake I originally ordered was still 4 weeks out was resolved by changing it to one they had on the shelf. Every thing is in place and my BA is ready to ship....
A week later still no shipping info.
Is this normal in this industry?
I’m not asking about lengthy delay, no issues waiting on quality product, just concerned about last few weeks since final invoice has been paid.
In 1 week it will be 12 months from the date of order. I have received email requesting final payment. Sent FFL info and paid in full. Next day contacted PVA and was informed that no FFL info was on file. Stopped by my dealer and had him re-submit all info again. Called to confirm and they have received everything that was required on my part.
Little delay due to muzzle brake I originally ordered was still 4 weeks out was resolved by changing it to one they had on the shelf. Every thing is in place and my BA is ready to ship....
A week later still no shipping info.
Is this normal in this industry?
I’m not asking about lengthy delay, no issues waiting on quality product, just concerned about last few weeks since final invoice has been paid.
Not normal This the first time I've ever ran into an issue like this. Usually when final payment is made the item is shipped that day. If something is missing it would require a call and a decision can be made. Going comms off and making the customer call to find out what the delay is--is poor customer service. I'm at 15-months and paid in full two months ago. I'm sure the product will be high quality but more than likely won't do business with PVA again.
ARCALOCK 12" Universal Dovetail Rail
**Rear Fixed Barricade stop not included, check it out HERE! MLOK Hardware not included. Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve...
www.area419.com
The arca rail is from sawtooth rifles here in Wa, by far the best option for the KRG. They also make the accutac pic to arca bipod adapter. It works awesome for converting just about any pic bipod to arca.
We are shipping things as fast as we possibly can.
Rick answers the phone and ships parts. If the phone rings and someone needs attention then the barreled action doesn't get packed right away. We are trying to remedy this with people helping to pack and QC but that's something we are trying to get ahead of.
After having people complain that stuff got rained on when their lazy delivery guy left it next to the street we took the additional measure of packing things essentially in triplicate. Paper, plastic, then cardboard.
We shipped 20 barrels and barreled actions on Thursday alone. The work is going out, not everyone who is a customer posts things here or is even a Sniper's Hide member.
A gundealer in FL who is a friend called me this morning and said "I hate unpacking stuff from you because it's so time consuming... though I have to admit, it's never damaged".
To followup on the complaint above about the wrong thread on the muzzle.
We sent a 2 day return label that day and guaranteed a 24hour in/out fix on it.
He declined to have it changed as is his perogative.
MY buddy still ended up with a busted up box but everything inside was undamaged. He works for a big box making company if you ever want to better your boxes has said he could suggest a couple changes
I’m being sincere also, not sarcastic
Last edited:
maybe you need to time study Rick - 20/hr would be a good pace, but 20 a day? He should have plenty of time to QC and answer phones.
I have.
I would encourage you to attempt packing a barreled action up in 3 min (20/hr). I am willing to bet that with absolutely no distractions you can't do it to a level where they are unlikely to be damaged from package handlers.
Without distractions it is a 15 min job for an hourly employee doing it all day.
Then do it while the phone rings every 90s and people need 2min of your time.
Then track down the FFL info that the customer sent but didnt send in the email format requested, or they said "call this guy" and that guy doesnt have a legible PDF.
I can do it "fast" on a Saturday. But not when attention is split across tasks.
I am not trying to come off abrasive but most people have no idea how to effectively pack a rifle barrel so it doesnt get mashed. We get trashed stuff all the time, action tangs sticking thru boxes. The barrels are heavy, slender, smooth and prone to poking thru boxes.
People on here complain about our packing job if the delivery guy leaves their signature required box out in the rain without a signature. Somehow that becomes my fault, so my response is that we pack the hell out of stuff.
Remember, shipping a blank is a lot different than shipping a complete barrel. The barrels have a lot of expensive machine work exactly in the most damage prone areas.
This is why I absorb the expense of making thread protectors to simply give away on every threaded barrel. It is an additional layer of protection against the people who throw boxes around without a care.
Last edited:
That is an excellent photo! Nice looking rifle. I like what you did with the name plate.
Thanks, just got it together and going to the range tomorrow. I think the plate on the side adds to the custom look and separates it instantly from a standard r700 With KRG stock.. So far in initial inspection, the barrel work and action feel is the finest I have ever seen or handled. Nice work! Range update to follow.
As a 35yr UPS driver, I can state to PVA's packing. Took me a couple of minutes to unpack my barrel. It was over packed. (good job)
So as to packing it, it would take a lot longer to do this job.
I always told customers or business to spend a little more time and use a little more packing and tape
and get it there the first time. A little time and money spent now is much better than filing a claim
and dealing with a unhappy customer, time lost and still having to reship it again.....
So as to packing it, it would take a lot longer to do this job.
I always told customers or business to spend a little more time and use a little more packing and tape
and get it there the first time. A little time and money spent now is much better than filing a claim
and dealing with a unhappy customer, time lost and still having to reship it again.....
I feel for whoever has to track down ffl info at PVA. Josh is not bullshitting when he says it takes a lot of time to hunt down a customer's ffl info. All of the ffls I've ever dealt with do not just give out their info to the public, so as a customer, you kinda have to stay on top of it to make sure they sent it over to PVA. Also if PVA is shipping to California, they have to get a CFLC and send that along with the rifle or else a CA ffl won't accept the transfer. It's a pain in the ass.
20 an hour? I would hate to receive a gun or barreled action packages in 3 minutes. I can't see that unless you tossed it in a plane case the stuck it in the cardboard box. Even then, I dont see 3 minutes long enough to get the shipping label, a box and material to package it and the gun for that order.
As someone that has had a barrel hanging out of the package with damaged threads, it's good to hear they are taking the time to do it right. I've also had bolts packaged poorly and damaged upon arrival. Why in the fuck people would complain about this is fucking amazing. I get that people are upset with lead times but wait til you receive a product damaged then see how that works out.
No, neither of these issues were from PVA just to make it clear. I hope PVA can get caught up without pissing off too many customers and losing future business because of this. I am sure he isn't happy about the way things are going and has heard about it from more than just people on here.
During my time packing in the warehouse at my job, fluorescent lightbulbs took an average of 3-4minutes that’s if they are straight forward. The bigger flus would take 5-15minutes. Mind you I’m packing bulbs from 3ft-8ft and sending them across the country and internationally.
Now talking guns and machined parts, if he’s talking about if he’s doing 1/every 15minutes that’s sounds pretty good. I mean we are talking about machined threads and parts. If they are standard cardboard boxes used for packaging plus whatever material that’s a pretty good start.
@bohem it sounds like Rick is doing a fine job, I’m betting the QC piece is the part that’s burning up time. The only way to quicken the process would adding help on the QC or packing. Looking at normalize packing and QC procedures. I can’t imagine the challenges of running a shop and getting product out. I’m one of the orders waiting for fulfillment. Hope you’re able to stay on task.
Now talking guns and machined parts, if he’s talking about if he’s doing 1/every 15minutes that’s sounds pretty good. I mean we are talking about machined threads and parts. If they are standard cardboard boxes used for packaging plus whatever material that’s a pretty good start.
@bohem it sounds like Rick is doing a fine job, I’m betting the QC piece is the part that’s burning up time. The only way to quicken the process would adding help on the QC or packing. Looking at normalize packing and QC procedures. I can’t imagine the challenges of running a shop and getting product out. I’m one of the orders waiting for fulfillment. Hope you’re able to stay on task.
I'm not about to tell someone how to do their job, but I will ask the question; if your choke point is the QC, packer, phone man and he is spending ~57% of his time on the phone (23 hrs/wk in a 40 hr work week, and I bet you can't remember the last time any of you worked just 40 hours) at what point is help hired to take over packing?
It's funny you mention I may not understand how long it takes to package a barreled action or barrel because I would confidently say I have done that more than 90% of the other non dealer/mfg members on this site and I don't believe 3-5 mins is unrealistic provided all the shipping materials are readily available, organized and accessible.
I will also say my last PVA barrel, which was received late 2018, did come very well packaged, but packaged very inefficiently. I.e. a lot of wrapped bubble wrap and packing tape to hold it in place. Pipe insulators are your friend - they protect better and more completely, and can be cut oversized to protect fragile machine work and when cut to size for a snug fit in the box, prevent any chance of the muzzle, and/or chamber / Tang protruding.
I wouldn't have thought that to be a unique idea but I've actually shipped 2 barrels to 2 different shipping managers and both thought it was a fantastic use of resources, so it can't hurt to float you that idea to cut down on packing time.
Shot it out to 1550 yesterday very happy with final product. Just wish I had bought the jet blast break at the same time.
bohem what is the delivery time of a break if I order?
Shot it out to 1550 yesterday very happy with final product. Just wish I had bought the jet blast break at the same time.
bohem what is the delivery time of a break if I order?
I don't want to speak for PVA, but I ordered a jet Blast last month, came in 3 days
bohem what is the delivery time of a break if I order?
I don't want to speak for PVA, but I ordered a jet Blast last month, came in 3 days
Another photo to tide you over for those patiently waiting. This is 1278yds, the farthest I have shot. First shot on target high right, took .1 off and held a little more wind and shot 6 more rounds.
PVA Rock Creek button barrel
Hornady 140eldm match factory ammo
PVA Rock Creek button barrel
Hornady 140eldm match factory ammo
I stand by my offer to assist with developing a system that will make selecting an FFL easy and painless for the 98% of customers that use an FFL that has existed since before August 2018 (or whenever the ATF's latest full listing of FFL holders has been released).
Getting my FFL dealer to 'work' with PVA was a pain for me and, I'm sure, a much greater pain for PVA...That process should be automated, it is very time-consuming...JSNS
Got the lefty JHR today! Packing and finish are great!
Ordered the jetblast muzzle brake with coupon.
My questions are :
1) what brand magazines are people having the best luck with in the JHR?
2) What brand arca rail seems to be working the best with the bravo stock?
Thanks in advance.
Ordered the jetblast muzzle brake with coupon.
My questions are :
1) what brand magazines are people having the best luck with in the JHR?
2) What brand arca rail seems to be working the best with the bravo stock?
Thanks in advance.
I bought the American Rifle Company (ARC) 10 Round Magazines that PVA sells. Feeding has been flawless so far. It fits in pretty snugly, but drops out when I press the release.
I installed the Jetblast brake and it is very effective.
What Caliber did you get? If it's .308 family, AICS, Accurate-Mag, ARC magazines all work. If it's Short Action Magnum (ie 6.5 PRC), get the Accurate-mag 300WSM mags.
Sawtooth rifles KRG arca rail works great and is made for it
It has been noted by some the KRG Acra rail has too much flex, causing a problem moving bipods, etc. They and I purchased the 8" Universal Area 419 AcraLock rail and 3 m-lok nuts/bolts to go with it. Fits very well and doesn't flex... A friend purchased the 12" rail, which extends about 2" beyond the end of the Bravo chassis...He purchased both KRG's and Area 419 rails and returned the Area 419 rail...Be sure and order the m-lok nuts/bolts to attach the universal rail...At least 3-4 depending on the length you order...YMMV...
That’s exactly why I recommended the Sawtooth Rifles version and it’s less coin than the 419 and comes with the needed attachment hardware. So, some good options out there. Congrats on the JHR.
I’m another one with the ARC mags. I bought two of them last March, the first one I unpacked worked so well, the second one is still in the box.
I also got the Jetblast. It works as described. I’m happy with my purchase all around.
I also got the Jetblast. It works as described. I’m happy with my purchase all around.
Just got a request for final payment on my JHR #2332. They seem to be having issues with their VOIP phone today, but there's a form for FFLs to submit their info on PVA's website which I think is new (at least I hadn't seen it on their site before), so it looks they're proactively trying to streamline the FFL issues. 
@ThePretzel I read your last few posts regarding the FFL selection system and I think that would be great. I will send you a PM. You gave me a very simple idea for the meantime which I will discuss in the next post so thanks for that!
@sold7 Jet Blast brakes will ship within in 24 hours if they are in stock on the website. We have a batch going out to nitriding shortly and should have plenty of stainless bakes coming through production within the few days.
@sold7 Jet Blast brakes will ship within in 24 hours if they are in stock on the website. We have a batch going out to nitriding shortly and should have plenty of stainless bakes coming through production within the few days.
- Status
Similar threads
