Suppressors QuietBore 22LR Titanium Suppressor Build Review -***Approved Form 1 Required***

[coyotewillie]

I asked here about using an IPhone app when I got my manf suppressors. EVERY response made fun of me saying those were worthless for suppressor evaluation. Interested to see what everyone says now!

 

[BerettaguyCC2]

No. On April 10th, they responded to my email about delivery timeframe, stating...
"Good afternoon,
We have filled all the SS orders and some of the Ti orders. We are working through the orders on the Ti parts as quickly as possible with the restrictions from the PA Governor and the COVID19 problems.
We are expecting to finish out the rest of the Ti parts next week.
Thank you,

Brandywine Safety Products
Thank you for contacting BSP for your solvent containment needs. Please see our website FAQ for answers to most questions. We look forward to serving you."

Now nearly a month of hoping and waiting for something I was told would ship 3 weeks ago, I emailed...

"When can I expect my Ti order to be shipped? April 10th you stated orders will be done and fulfilled that week. That has long come and gone. When I ordered my 2nd Ti kit +2 cups, from my understanding, my order made the 10th ordered needed as you were struggling to have enough orders to justify. Its been over two months to fulfill 10 orders. Please ship my order to me immediately."

I'll keep you updated on here with replies. At this point I'm just happy I paid with a credit card. Hope I'm wrong, but confidence is low we will see these.

Any follow up on this yet?

 

[Clownbuster]

Any follow up on this yet?

Zero response from Brandywine.

 

[BerettaguyCC2]

Zero response from Brandywine.

Sounds like it might be time to cancel some orders...

 

[Clownbuster]

Id be alright with @padom reaching out to them for obvious reasons.

 

[padom]

I just sent them a message. We will see

 

[DellaDog]

I just sent them a message. We will see

I've sent a few messages to Preston as well.
Got a response a few weeks ago, but silence since.

 

[Clownbuster]

I've sent a few messages to Preston as well.
Got a response a few weeks ago, but silence since.

This is regarding all the Ti cup orders to Brandywine, not Quiet Bore.

 

[HansohnBrothers]

We should be getting more of the Quell Tech Mod-U-Less in a few weeks.

 

[BerettaguyCC2]

I just sent them a message. We will see

It's been a week, Any word?

 

[Clownbuster]

It's been a week, Any word?

@padom - Hey Dom, I'm curious what's keeping you from going to Dan Stabilito's place and running this down? Isn't he a friend and local to your area in PA??
Ive called, nothing. Email, same.
Anyone else wanna try?

Here's his number - (610) 636-1257

Here's his Facebook -

Here's his house - AKA Brandywine Safety Solutions

 

[phatdoughnut]

Did anyone get their SS baffles? Just wondering. I ordered the Ti with 1 SS.

 

[padom]

@padom - Hey Dom, I'm curious what's keeping you from going to Dan Stabilito's place and running this down? Isn't he a friend and local to your area in PA??
Ive called, nothing. Email, same.
Anyone else wanna try?

Here's his number - (610) 636-1257

Here's his Facebook -
View attachment 7330727

Here's his house - AKA Brandywine Safety Solutions
View attachment 7330732

I didn't sell you or anyone here anything. Whats keeping me from running this down? How about I didnt sell you anything and have no ties or relations to them. They were a local company I asked if they could make something, they said they needed a minimum and I posted that. You didn't pay me, I didn't run a group buy or anything like that. Also, I have no idea who that person is you are posting.

 

[padom]

I just texted the owner. He is refunding all orders your money. End of story.

 

[cavemannnn]

I just texted the owner. He is refunding all orders your money. End of story.

Damn, any reason why? I just pinged you in the other thread then read this one. Definitely not asking you to bust down any doors lol, was just hoping to be able to complete my first Form 1 can with some premium parts.

 

[phatdoughnut]

Damn, any reason why? I just pinged you in the other thread then read this one. Definitely not asking you to bust down any doors lol, was just hoping to be able to complete my first Form 1 can with some premium parts.

Thanks impatient people.

 

[Silverjay]

Agreed.

 

[padom]

Receiving daily emails and threats being made isnt something they were interested in. It was easier to refund everyone their money.

I think some people forget we are in a stay at home lockdown order still here in SE PA and things aren't business as usual.

 

[Clownbuster]

Oh gimme a fucking break. I emailed him once. He didn't respond. Didn't threaten anyone. Called once; didn't leave a message. If I was "locked down" and wasnt making chips, I could certainly return a fucking email to at least the person that facilitated this whole deal; you can't have it both ways. Jesus I'll cut my own.

 

[padom]

Oh gimme a fucking break. I emailed him once. He didn't respond. Didn't threaten anyone. Called once; didn't leave a message. If I was "locked down" and wasnt making chips, I could certainly return a fucking email to at least the person that facilitated this whole deal; you can't have it both ways. Jesus I'll cut my own.

Wait you emailed him once and your asking me why I'm not "running him down for you?" Which one is it? I sent the owner a copy of your message and they refunded all of your money.

 

[Clownbuster]

Thanks impatient people.

Lol, sorry we asked about something that was told would be done over a month ago with zero response from a person that was paid up front.

 

[padom]

Lol, sorry we asked about something that was told would be done over a month ago with zero response from a person that was paid up front.

Asking about something is completely different then calling me out by name publicly and asking why I'm not running them down and implying I'm friends with them and then posting Google maps and pictures of random people.

Thats not, I just sent them an email. You could have PM me.

 

[Silverjay]

Calls and emails aside your post above with pics and addresses would be over the line for me. I get the delay and bad come in these times. Not all do.

 

[Clownbuster]

Wait you emailed him once and your asking me why I'm not "running him down for you?" Which one is it? I sent the owner a copy of your message and they refunded all of your money.

You're right, shame on me for expecting something I paid for.

 

[padom]

You're right, shame on me for expecting something I paid for.

No shame on you for expecting me to run someone down for something I didn't pay for.

 

[Clownbuster]

Sure

 

[padom]

I dont have any skin in this game. I didnt get paid or promised anything from them. For a lot less effort you could have PM and asked if I could help but instead you handled it the way you did. I forwarded your post to them and they said everyone's getting refunds. End of story

 

[Lunchbox27]

Jesus Christ...

Clownbuster, don’t ever submit a Form 4.

 

[Clownbuster]

I posted the address of Brandywine off of the OnxHunt app which comes from public county tax records and from their public listing on Facebook, along with the owner's name on his public Facebook page. Were you not concerned the guy was 100% silent? Was he sick? Dead? Im assuming you met this person at least once and shook his hand? No?

 

[Clownbuster]

Jesus Christ...

Clownbuster, don’t ever submit a Form 4.

10-4 boss.

 

[padom]

I posted the address of Brandywine off of the OnxHunt app which comes from public county tax records and from their public listing on Facebook, along with the owner's name on his public Facebook page. Were you not concerned the guy was 100% silent? Was he sick? Dead? Im assuming you met this person at least once and shook his hand? No?

All the info you posted is not the same company, owner, address, etc. I dont know who that company you posted is..

You didnt PM me. How would I know you had a contact issue? How could I be concerned about something I don't know about? I didnt order Ti baffles...i got my SS baffles...If you PM me I could have rectified this an entirely different way.

 

[Silverjay]

I posted the address of Brandywine off of the OnxHunt app which comes from public county tax records and from their public listing on Facebook, along with the owner's name on his public Facebook page. Were you not concerned the guy was 100% silent? Was he sick? Dead? Im assuming you met this person at least once and shook his hand? No?

I was not concerned at all. Several businesses I work with have been silent with the stay at home orders. This would have been the first buy of this type I have been involved with on time. They are almost always late, part of the deal in my opinion. Different tolerance? More trust?

 

[JBPilot]

Really? Damnit I was waiting PATIENTLY!! On 2 sets of Ti cups for the .30 cal can. Thanks a lot

Dom, thank you for trying to get this done for us.

 

[TonyTone]

Hello everyone! Got all my paperwork together to form 1 a Quiet Bore .22 "solvent trap" but not sure what kit to buy. I'm reading mixed opinions on what material to go with. Some say aluminum is good enough for .22 if greased/kept clean, some say to do the first cone titanium and the rest aluminum and then others say to skip the aluminum and go with titanium. What do you guys think? I am just questioning the cleaning process with each material. I own a case tumbler but I assume you can't run the aluminum cones in there with a good medium to clean them, but I am also okay with a little elbow grease to clean it as well.

I'd like to get an order in soon since they are 2-3 weeks behind, which isn't a big deal since its going to take 30 days or so for my form 1 to be approved.

Thanks in advance!

 

[BuckeyeCZ77]

I’m by far not an expert. I think Aluminum is fine for .22, and having the first baffle Ti will enhance it. However, I purchased an all Ti model as the price was worth it to me not to worry about.

I’m still waiting on mine, but the quality seems good online.

 

[BerettaguyCC2]

Hello everyone! Got all my paperwork together to form 1 a Quiet Bore .22 "solvent trap" but not sure what kit to buy. I'm reading mixed opinions on what material to go with. Some say aluminum is good enough for .22 if greased/kept clean, some say to do the first cone titanium and the rest aluminum and then others say to skip the aluminum and go with titanium. What do you guys think? I am just questioning the cleaning process with each material. I own a case tumbler but I assume you can't run the aluminum cones in there with a good medium to clean them, but I am also okay with a little elbow grease to clean it as well.

I'd like to get an order in soon since they are 2-3 weeks behind, which isn't a big deal since its going to take 30 days or so for my form 1 to be approved.

Thanks in advance!

Use code " snipershide " to save 10%. Go with all Ti. NFA items are lifetime items so it's a small investment for a lifetime item. Plus it does make cleaning easier.

 

[TonyTone]

Use code " snipershide " to save 10%. Go with all Ti. NFA items are lifetime items so it's a small investment for a lifetime item. Plus it does make cleaning easier.

Got it! Thanks a lot!

 

[hertz654]

I purchased the 22lr trap with ti baffles on April 28 -- got a tracking number today. Just be patient, Young Grasshopper.

 

[308guru]

$250 for the 22lr Titanium kit.
Add $75 for the 22lr drill fixture.

So maybe I’m overlooking something obvious, but why go this route instead of buying a suppressor? A Sparrow is $300 and there are many options between $300-$400.

 

[TonyTone]

I purchased the 22lr trap with ti baffles on April 28 -- got a tracking number today. Just be patient, Young Grasshopper.

I just submitted my form 1 so I have time to wait LOL

So maybe I’m overlooking something obvious, but why go this route instead of buying a suppressor? A Sparrow is $300 and there are many options between $300-$400.

The wait time. Its about 30 days on average for a form 1 to be approved, and 8-12 months for a form 4.

 

[308guru]

The wait time. Its about 30 days on average for a form 1 to be approved, and 8-12 months for a form 4.

That’s a pretty significant time difference.

Thanks for the info.

 

[TonyTone]

That’s a pretty significant time difference.

Thanks for the info.

And you get to have fun making up model names and serial numbers with form 1 builds.

 

[erod007]

I purchased the 22lr trap with ti baffles on April 28 -- got a tracking number today. Just be patient, Young Grasshopper.

Wow i m glad you got your tracking number, I order mine on April 18 and i still have not heard anything and they are not responding to emails. fingers crossed it shows up soon

 

[Redoubt99]

Quick question. Im looking at suppressing my CMMG Banshee 9mm. Direct thread obviously. But I dont see a place on the website for Ti? Also is is possible to get the 30 cal kit and the 9mm drill kit? The banshee is a chainsaw, it chews through rounds and its already super light, a beefier suppressor would be ideal would it not? So many questions!

 

[phatdoughnut]

Quick question. Im looking at suppressing my CMMG Banshee 9mm. Direct thread obviously. But I dont see a place on the website for Ti? Also is is possible to get the 30 cal kit and the 9mm drill kit? The banshee is a chainsaw, it chews through rounds and its already super light, a beefier suppressor would be ideal would it not? So many questions!

the drill kits are designed for the specific cups and I think they are shaped differently so they won’t work. plus the .30 cal
Kit is 2lbs. There is no ti cups for the 9mm or any other lot other then the .22.

 

[Redoubt99]

the drill kits are designed for the specific cups and I think they are shaped differently so they won’t work. plus the .30 cal
Kit is 2lbs. There is no ti cups for the 9mm or any other lot other then the .22.

Oh I see. Thank you. I can't find info but are the 9mm rated full auto sub gun?

 

[Fightclub]

Quick question. Im looking at suppressing my CMMG Banshee 9mm. Direct thread obviously. But I dont see a place on the website for Ti? Also is is possible to get the 30 cal kit and the 9mm drill kit? The banshee is a chainsaw, it chews through rounds and its already super light, a beefier suppressor would be ideal would it not? So many questions!

Quietbore doesnt offer Ti baffles for the 9mm cause it isnt needed. 9mm drill kit DEF doesnt work with 30 cal kit. i have both.if you arent shooting full auto, the qb kit is great (assuming youre shooting subs)

 

[phatdoughnut]

Oh I see. Thank you. I can't find info but are the 9mm rated full auto sub gun?

I’m not an engineer but it seems that the full auto rated cans are mostly stainless steel. So no cause it’s all aluminum.

 

[Redoubt99]

Quietbore doesnt offer Ti baffles for the 9mm cause it isnt needed. 9mm drill kit DEF doesnt work with 30 cal kit. i have both.if you arent shooting full auto, the qb kit is great (assuming youre shooting subs)

Not full auto but the banshee is pretty much made to shoot fast. Not sure if the QB is the best bet for what Im looking to do I guess. Id like to try one out though. Decisions decisions. thanks for your help!

 

[Redoubt99]

I’m not an engineer but it seems that the full auto rated cans are mostly stainless steel. So no cause it’s all aluminum.

Yea hence why I was kinda aiming at the 30cal since its steel. Thought it was worth a shot. No worries. Thanks for your help.