Reccomendation on press for .50 bmg and smaller
- Thread starter vulcanfear20
- Start date
I've never seen a press that would work for 50BMG that was not a 50BMG press.
But a BMG press should do everything with the 7/8-14 bushing installed.
But a BMG press should do everything with the 7/8-14 bushing installed.
I have a talon Advanced reloading press. I bought it for Cheytac but it will do a .50 and just about anything caliber.
www.solidsolutiondesigns.com
Talon Advanced Reloading Press - Solids Solution Designs
Talon Advanced reloading press. Upgrade your reloading skills. New CNC designed for optimum accuracy. Reduces runout and improves accuracy. Ships worldwide.
www.solidsolutiondesigns.com
Lee Classic cast iron single stage is the cheapest option, especially if you order as the ".50 BMG press" so that it comes with the dies.
The Lee .50 cal dies are different thread size (1-1/2 x 12) than RCBS and other brands, so you can't then get some aftermarket seater if you wanted to, and you can only use the Lee lock ring for the Lee dies. Kit has a 7/8-14 thread bushing to use normal dies for other cal's.
RCBS may be the next, more expensive, option and would allow other brands of dies.
www.rcbs.com
www.rcbs.com
The Lee .50 cal dies are different thread size (1-1/2 x 12) than RCBS and other brands, so you can't then get some aftermarket seater if you wanted to, and you can only use the Lee lock ring for the Lee dies. Kit has a 7/8-14 thread bushing to use normal dies for other cal's.
RCBS may be the next, more expensive, option and would allow other brands of dies.
50 BMG Reloading Presses | RCBS
RCBS reloading equipment 1 1/2-inch-12 presses such as the AmmoMaster 2 are designed to accept dies for reloading the .50 BMG. Shop now.
www.rcbs.com
Ammomaster -2 Single Stage Press | RCBS
Buy Ammomaster -2 Single Stage Press at RCBS, the leading producer of high-quality reloading equipment supplies for over 60 years.
www.rcbs.com
Last edited:
- Mar 15, 2018
- 1,360
- 5,373
The Turban will. I'm not loading .50 but everything else up to .375CT. They're built like a brick shit house; had mine for about 3 years now.
www.turban-cnc.de
P.s. Can also highly recommend the Triebel dies with it.
www.triebel-guntools.de
Heavy Präzipress 140mm – CNC Turban
www.turban-cnc.de
P.s. Can also highly recommend the Triebel dies with it.
Triebel - Waffenwerkzeuge GmbH - TRIEBEL Reloading
www.triebel-guntools.de
