Redding 338 Full length S bushing???

[Sako man]

Ok, so im gonna get rid of my RCBS 338 sizing die, I should have gone right to the Redding S in the first place. What size bushing are people using for 338 LM with their Redding?

Thanks

 

[mdmp5]

365 or 366. My loaded rounds measure about 3675 - 3678 or so, in which case I use the 366 bushing.

 

[George63]

.366 is a pretty good compromise

 

[mdmp5]

368 is the largest bushing redding makes. I have that one too, and use it for neck sizing as a step down

 

[Dogtown]

I've used a few different ones, but settled on .365

 

[Sako man]

Well if it's anything like my 260 and 308 dies I always play it safe and go down one size but end up having to buy the next size smaller, lol. Heck I will just measure a round and go down two. Hum, do not thank that it really matters but Dog your shooting a DTA, I can't imagine the barrel I have is any different, so happy Midway has all my credit on record, haha, NOT!

OK, 367 is what I measured but that is from fire formed brass that has been through my TRG42.

Who wants to buy my TRG42 , my DTA is turning into a multi caliber gating gun.

 

[Enough Said]

.367 for a couple years now and still rocking half-minutes on paper.

 

[ChrisGarrett]

I've always used the .365 TiN bushing, even though I have the .364 as well.

Lapua and Norma brass.

Chris