-
Having trouble using the site?
Contact support
Rem 700 SPS Tactical AAC-SD...A Work In Progress
- Thread starter SBD47
- Start date
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Looks good so far. For a budget build I wouldn't spend 90-100 bucks on a bolt knob. Thats ammo/reloading comp money. Or better yet, use that towards the RAD brake you were looking at (I have one, its very effective). But hey, its your dough, spend as you wish.
Looks good so far. For a budget build I wouldn't spend 90-100 bucks on a bolt knob. Thats ammo/reloading comp money. Or better yet, use that towards the RAD brake you were looking at (I have one, its very effective). But hey, its your dough, spend as you wish.
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RobG</div><div class="ubbcode-body">Looks good so far. For a budget build I wouldn't spend 90-100 bucks on a bolt knob. Thats ammo/reloading comp money. Or better yet, use that towards the RAD brake you were looking at (I have one, its very effective). But hey, its your dough, spend as you wish. </div></div>
<span style="font-weight: bold">The purpose of my "budget" was to show what $1500 could get you, not because I only have $1500 to spend. This build will end up costing well over $1500 by the time I add a DBM and a suppressor.
The Rad Rapid Brake is out-of-stock right now. I'll probably grab one when they are back in-stock.
Still trying to decide which Phoenix Customs Bolt Knob I want. Leaning toward the Three Ring Varminter.</span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RobG</div><div class="ubbcode-body">Looks good so far. For a budget build I wouldn't spend 90-100 bucks on a bolt knob. Thats ammo/reloading comp money. Or better yet, use that towards the RAD brake you were looking at (I have one, its very effective). But hey, its your dough, spend as you wish. </div></div>
<span style="font-weight: bold">The purpose of my "budget" was to show what $1500 could get you, not because I only have $1500 to spend. This build will end up costing well over $1500 by the time I add a DBM and a suppressor.
The Rad Rapid Brake is out-of-stock right now. I'll probably grab one when they are back in-stock.
Still trying to decide which Phoenix Customs Bolt Knob I want. Leaning toward the Three Ring Varminter.</span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Have had one of these for about a month.. Have not shot it yet..
Have been waiting for new stock to arrive from Stockys..
Should be here by end of day Thursday...
Still waiting for the can I paid for in June...
Have had one of these for about a month.. Have not shot it yet..
Have been waiting for new stock to arrive from Stockys..
Should be here by end of day Thursday...
Still waiting for the can I paid for in June...
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MQXL</div><div class="ubbcode-body">Have had one of these for about a month.. Have not shot it yet..
Have been waiting for new stock to arrive from Stockys..
Should be here by end of day Thursday...
Still waiting for the can I paid for in June... </div></div>
<span style="font-weight: bold">Which suppressor did you order?</span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MQXL</div><div class="ubbcode-body">Have had one of these for about a month.. Have not shot it yet..
Have been waiting for new stock to arrive from Stockys..
Should be here by end of day Thursday...
Still waiting for the can I paid for in June... </div></div>
<span style="font-weight: bold">Which suppressor did you order?</span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Its made by Tornado Tech here local in Oregon..
Based on a Aussie design but in not in metric
in 7.62 of course...
Thinking of getting a yam Phantom for the custom
Mega I build last year...
Its made by Tornado Tech here local in Oregon..
Based on a Aussie design but in not in metric
in 7.62 of course...
Thinking of getting a yam Phantom for the custom
Mega I build last year...
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Nice build so far. I have the 700 AAC and love it. I have a McMillan A1-3 stock, Harris 6-9 bipod, Seekins 20 MOA base, Seekins rings, AAC Brake ( for the 762SD ), Bushnell Elite 3200 3.5x21x40AO Mil scope. Currently the rifle is out at William Roscoe's having a seekins bottom metal installed, bolt knob work, action bedding, and cut, crown, re-thread the barrel and time the brake. I have a Timney 510 trigger waiting for when it gets home. I am in the group buy for the Bushnell HDMR G2 scope.
Will post some pics when it gets home.
Nice build so far. I have the 700 AAC and love it. I have a McMillan A1-3 stock, Harris 6-9 bipod, Seekins 20 MOA base, Seekins rings, AAC Brake ( for the 762SD ), Bushnell Elite 3200 3.5x21x40AO Mil scope. Currently the rifle is out at William Roscoe's having a seekins bottom metal installed, bolt knob work, action bedding, and cut, crown, re-thread the barrel and time the brake. I have a Timney 510 trigger waiting for when it gets home. I am in the group buy for the Bushnell HDMR G2 scope.
Will post some pics when it gets home.
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
im going to be pissed if you build my rifle for $1500.
ive got the same Rifle, scope, rings, base, bipod, and a similarly priced stock and i destroyed a $1500 budget...
im going to be pissed if you build my rifle for $1500.
ive got the same Rifle, scope, rings, base, bipod, and a similarly priced stock and i destroyed a $1500 budget...
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cajun 22</div><div class="ubbcode-body">Nice build so far. I have the 700 AAC and love it. I have a McMillan A1-3 stock, Harris 6-9 bipod, Seekins 20 MOA base, Seekins rings, AAC Brake ( for the 762SD ), Bushnell Elite 3200 3.5x21x40AO Mil scope. Currently the rifle is out at William Roscoe's having a seekins bottom metal installed, bolt knob work, action bedding, and cut, crown, re-thread the barrel and time the brake. I have a Timney 510 trigger waiting for when it gets home. I am in the group buy for the Bushnell HDMR G2 scope.
<span style="color: #FF0000">Will post some pics when it gets home.</span> </div></div>
<span style="font-weight: bold">Please do.</span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cajun 22</div><div class="ubbcode-body">Nice build so far. I have the 700 AAC and love it. I have a McMillan A1-3 stock, Harris 6-9 bipod, Seekins 20 MOA base, Seekins rings, AAC Brake ( for the 762SD ), Bushnell Elite 3200 3.5x21x40AO Mil scope. Currently the rifle is out at William Roscoe's having a seekins bottom metal installed, bolt knob work, action bedding, and cut, crown, re-thread the barrel and time the brake. I have a Timney 510 trigger waiting for when it gets home. I am in the group buy for the Bushnell HDMR G2 scope.
<span style="color: #FF0000">Will post some pics when it gets home.</span> </div></div>
<span style="font-weight: bold">Please do.</span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kentactic</div><div class="ubbcode-body">im going to be pissed if you build my rifle for $1500.
ive got the same Rifle, scope, rings, base, bipod, and a similarly priced stock and i destroyed a $1500 budget... </div></div>
<span style="font-weight: bold">Its all about shopping my friend. I got a killer price on the scope, which helped.</span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kentactic</div><div class="ubbcode-body">im going to be pissed if you build my rifle for $1500.
ive got the same Rifle, scope, rings, base, bipod, and a similarly priced stock and i destroyed a $1500 budget... </div></div>
<span style="font-weight: bold">Its all about shopping my friend. I got a killer price on the scope, which helped.</span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
B&C A5 finally got here
thought I would update.
Breaking in this weekend..
B&C A5 finally got here
thought I would update.
Breaking in this weekend..
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<span style="font-weight: bold">I finally received a set of Seekins 30mm Low Rings today. In short, they are awesome, very high quality rings, as expected. I'll post some pics as soon as my bolt get back from Precision Custom Rifles. I'm having them install a 3-Ringed Varminter Bolt Knob, perform their Shroud Modification, Reinforcement, and Cerakote the entire bolt. For anyone interested, PCR is having a group buy on Bolt Knob installs right now. The ad is in the Group Buy section, but basically they are doing the Bolt Knobs for $65 including Cerakote & Return Shipping. Killer Buy, but you have to act quickly to get in on it.</span>
<span style="font-weight: bold">I finally received a set of Seekins 30mm Low Rings today. In short, they are awesome, very high quality rings, as expected. I'll post some pics as soon as my bolt get back from Precision Custom Rifles. I'm having them install a 3-Ringed Varminter Bolt Knob, perform their Shroud Modification, Reinforcement, and Cerakote the entire bolt. For anyone interested, PCR is having a group buy on Bolt Knob installs right now. The ad is in the Group Buy section, but basically they are doing the Bolt Knobs for $65 including Cerakote & Return Shipping. Killer Buy, but you have to act quickly to get in on it.</span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Thanks for this thread, I'm using it to help put together my first build in .308 with a Remington 700 SPS-V
Thanks for this thread, I'm using it to help put together my first build in .308 with a Remington 700 SPS-V
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kaptain86</div><div class="ubbcode-body">Thanks for this thread, I'm using it to help put together my first build in .308 with a Remington 700 SPS-V </div></div>
<span style="font-weight: bold">Great! Be sure to post some photos of your build.
I'm hoping to receive my bolt back today from PCR. If so, I'll post some updated pics. </span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kaptain86</div><div class="ubbcode-body">Thanks for this thread, I'm using it to help put together my first build in .308 with a Remington 700 SPS-V </div></div>
<span style="font-weight: bold">Great! Be sure to post some photos of your build.
I'm hoping to receive my bolt back today from PCR. If so, I'll post some updated pics. </span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Holy smokes, I have a very similar setup and its a laser. I am also running the 10x HD and love it. Will post pics when I get a chance.
Holy smokes, I have a very similar setup and its a laser. I am also running the 10x HD and love it. Will post pics when I get a chance.
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nebraska123</div><div class="ubbcode-body">Holy smokes, I have a very similar setup and its a laser. I am also running the 10x HD and love it. Will post pics when I get a chance. </div></div>
<span style="font-weight: bold">Please do. </span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nebraska123</div><div class="ubbcode-body">Holy smokes, I have a very similar setup and its a laser. I am also running the 10x HD and love it. Will post pics when I get a chance. </div></div>
<span style="font-weight: bold">Please do. </span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<span style="font-weight: bold">Updated Pics with Seekins Rings & PCR Bolt Knob.</span>
<span style="font-weight: bold">PCR 3-Ringed Varminter Bolt Knob, Shroud Mod, Bolt Reinforcement & Cerakote</span>
<span style="font-weight: bold">Updated Pics with Seekins Rings & PCR Bolt Knob.</span>
<span style="font-weight: bold">PCR 3-Ringed Varminter Bolt Knob, Shroud Mod, Bolt Reinforcement & Cerakote</span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Those of you running the Seekins 20moa base are you using the base with 6-48 or 8-40 screws? Also is the HS Precision PST012 a true drop in or do you have to mess around with it?
Thanks.
Those of you running the Seekins 20moa base are you using the base with 6-48 or 8-40 screws? Also is the HS Precision PST012 a true drop in or do you have to mess around with it?
Thanks.
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Paulus</div><div class="ubbcode-body">I really like this rifle. nice build. a lot will disagree with me, but one of the reasons i chose the PSS is the stock. i honestly like it, and wouldnt think of parting with it. that 20" 1/10 twist already threaded barrel is very sweet, too. very nice rifle.
paulus </div></div>
i have one as well i like it very much
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Paulus</div><div class="ubbcode-body">I really like this rifle. nice build. a lot will disagree with me, but one of the reasons i chose the PSS is the stock. i honestly like it, and wouldnt think of parting with it. that 20" 1/10 twist already threaded barrel is very sweet, too. very nice rifle.
paulus </div></div>
i have one as well i like it very much
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slkzic</div><div class="ubbcode-body">Those of you running the Seekins 20moa base are you using the base with 6-48 or 8-40 screws? Also is the HS Precision PST012 a true drop in or do you have to mess around with it?
Thanks. </div></div>
<span style="font-weight: bold">6-48 screws. The PST012 is truly a drop-in installation. You can bed it if you desire, but it's not required. </span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slkzic</div><div class="ubbcode-body">Those of you running the Seekins 20moa base are you using the base with 6-48 or 8-40 screws? Also is the HS Precision PST012 a true drop in or do you have to mess around with it?
Thanks. </div></div>
<span style="font-weight: bold">6-48 screws. The PST012 is truly a drop-in installation. You can bed it if you desire, but it's not required. </span>
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Yep, I love mine too. Granted it is a work in process still. SWFA 20x scope, Burris xtream rings, weaver base ( to upgrade soon), and sling. Best group so far is a 3 shot at 100 yards that was 1''. Needless to say a good stock is the first upgrade to be done after deer season is done.
(can is not mine...yet)
Yep, I love mine too. Granted it is a work in process still. SWFA 20x scope, Burris xtream rings, weaver base ( to upgrade soon), and sling. Best group so far is a 3 shot at 100 yards that was 1''. Needless to say a good stock is the first upgrade to be done after deer season is done.
(can is not mine...yet)
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
Thanks for the info! Do you think I would have enough clearance to mount a SS 5-20x50 using the Seekins 20 moa base and the low rings or would you recommend mediums? Looking at your lastest pictures it looks like I would be good to go I believe.
Thanks
Thanks for the info! Do you think I would have enough clearance to mount a SS 5-20x50 using the Seekins 20 moa base and the low rings or would you recommend mediums? Looking at your lastest pictures it looks like I would be good to go I believe.
Thanks
Re: Rem 700 SPS Tactical AAC-SD...A Work In Progress
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slkzic</div><div class="ubbcode-body">Thanks for the info! Do you think I would have enough clearance to mount a SS 5-20x50 using the Seekins 20 moa base and the low rings or would you recommend mediums? Looking at your lastest pictures it looks like I would be good to go I believe.
Thanks </div></div>
<span style="font-weight: bold">I'm pretty sure I have seen a picture of that setup before. If I remember correctly, it was tight but fits. </span>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slkzic</div><div class="ubbcode-body">Thanks for the info! Do you think I would have enough clearance to mount a SS 5-20x50 using the Seekins 20 moa base and the low rings or would you recommend mediums? Looking at your lastest pictures it looks like I would be good to go I believe.
Thanks </div></div>
<span style="font-weight: bold">I'm pretty sure I have seen a picture of that setup before. If I remember correctly, it was tight but fits. </span>
Similar threads
