Have the 5R .308 and the Super Sniper 5x20x50, will Badger rings standard .823 height, Badger .20 MOA base, and Butler Creek covers work without clearence issues? THX
Rifle Scopes Remington 700 5R, SS 5 x 20 x 50 HD and Badger
- Thread starter annamariaslim
- Start date
Re: Remington 700 5R, SS 5 x 20 x 50 HD and Badger
I have the same ring/base setup mounting a Mk4 6.5-20 x 50 on a Remmy 5R. Enough clearence for the Butler Creek caps, but not too much.
OFG
I have the same ring/base setup mounting a Mk4 6.5-20 x 50 on a Remmy 5R. Enough clearence for the Butler Creek caps, but not too much.
OFG
Re: Remington 700 5R, SS 5 x 20 x 50 HD and Badger
Badger ring height call-outs are a little confusing inthat their "standard" is their lowest at .823". Those rings on their 20 MOA base is an ideal setup for a 50mm objective on a Remmy 5R. There is enough room under the Butler Creek cap for a mirage band, but no more.
I would not want anything higher.
OFG
Badger ring height call-outs are a little confusing inthat their "standard" is their lowest at .823". Those rings on their 20 MOA base is an ideal setup for a 50mm objective on a Remmy 5R. There is enough room under the Butler Creek cap for a mirage band, but no more.
I would not want anything higher.
OFG
Re: Remington 700 5R, SS 5 x 20 x 50 HD and Badger
I used a NF 56mm in NF low rings (.885) I believe on the same setup. 5R with NF 20MOA base. Fit fine with Butler Creek caps.
I used a NF 56mm in NF low rings (.885) I believe on the same setup. 5R with NF 20MOA base. Fit fine with Butler Creek caps.
