Remington versamax replacement parts?!?!

[Ryan7839]

My firing pin retaining pin worked its way out and broke while shooting my Versamax. A common issue with this model as I’m finding out after my research.

I can’t find a replacement anywhere!! Any suggestions??

 

[jb0311]

My firing pin retaining pin worked its way out and broke while shooting my Versamax. A common issue with this model as I’m finding out after my research.

I can’t find a replacement anywhere!! Any suggestions??

Did you call Remington?

 

[Hkmiller]

Call RemArms.

 

[mungmasterflash]

Any luck with this? I have versamax as well, and now I’m slightly worried

 

[Csafisher]

There’s a similar thread on shotgun world. I believe they have a linked website that sells Remington parts

 

[Ryan7839]

I called and got the part number sorted out and found one from gunrepaircenter.com

My previous conversations with them, they weren't manufacturing that part, thankfully they must have had a demand at some point in the past year. I ordered 2 for the headache.

 

[Adam B]

it is a Benelli copy, I replaced all of my parts with Benelli parts through Brownells

 

[jb0311]

@Ryan7839 somewhat surprised they didn't pay for it. Must have changed since the buyout/restructuring. Only had one 700 and they sent me a label to have the firearm shipped somewhere for repair on their dime. Good to know and glad you got it sorted.

 

[wpeach1912]

A few years ago I had luck at brownells for the bolt carrier extension. Seemed they had a lot of the parts in stock

 

[Adam B]

Here are the parts I replaced on mine

Here are the Brownells part numbers:
301-000-048WB FIRING PIN, AFTER S/N M104801
301-000-075WB FIRING PIN SPRING
301-000-065WB LOCKING HEAD PIN
301-000-007WB HAMMER, GLOSS, AFTER S/N M104801
301-000-409WB HAMMER SPRING
301-000-070WB EXTRACTOR
301-000-056WB LINK

 

[mungmasterflash]

Can you post the part number for that pin? Thanks!

 

[mungmasterflash]

Here are the parts I replaced on mine

Here are the Brownells part numbers:
301-000-048WB FIRING PIN, AFTER S/N M104801
301-000-075WB FIRING PIN SPRING
301-000-065WB LOCKING HEAD PIN
301-000-007WB HAMMER, GLOSS, AFTER S/N M104801
301-000-409WB HAMMER SPRING
301-000-070WB EXTRACTOR
301-000-056WB LINK

Is the locking head pin listed above the pin that started this thread?

 

[mewillis]

Remington Versa Max

Parts listed here are designed for the Remington Versa Max shotgun chambered in 12 gauge unless noted otherwise. MGW offers replacement barrels, choke tubes, stocks, forends, recoil pads, sights, mag tubes, springs, pins and other small parts for this semi-auto shotgun. Outfit your Remington...

www.midwestgunworks.com

 

[h4everything]

Finally broke the extractor on one of my Versamax's

Hope the benelli parts I ordered from Brownells work.

A hole bunch of the parts are not available for the remington and Benelli. Wish remington would get their act together get past that lawsuit and open back up

 

[Adam B]

The benelli parts just drop right in.

 

[mewillis]

it is a Benelli copy, I replaced all of my parts with Benelli parts through Brownells

Out of curiosity what Benelli is it a copy of?? A300? good info to know the Benelli parts are drop in

 

[Adam B]

M4, the patent ran out for the gas system so Remington copied it