Seeing if anyone has experience with this scope, worth selling one of my atacr’s to fund it??
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It is actually very simple. You download the revic app, create an account, and then it operates just like a ballistic calculator. You will upload parameters like Velocity, ballistic coefficient, zero range, etc. Click 'pair' and you are set up.How hard is it to get the ballistics set up in it ? I’ve been thinking of getting one.
I don't have one never touched one so my comment probably isn't worth much, but I just don't get this this scope over having a LRF with ballistics built into it like a Kilo 2400 ABS, Kilo 3000, a G7 or any LRF that can be linked to a Kestrel, why put sensitive electronics in a scope subject to repeated recoil. For unknown distance shooting you still need a LRF to get the range right? So with this scope you will laze the target get a number in yards or meters and then turn the elevation turret to that distance in yards or meters. With a LRF with built in ballistics you will laze a target then turn the elevation turret on (any scope you have) to what ever MILS or MOA number the LRF gave you. The only way this scope would be faster is if you were shooting on a known distance range or you already knew the distance to every target you were going to shoot at then yeah just turn the dial to that distance. Now if the scope had a LRF built into it that would be a different story, but even then do you want to point your rifle at everything you want to laze and you would be putting all your eggs in one basket so to speak. If you already have a LRF with built in ballistics and you just want to scratch that itch go for it, but if your budget doesn't allow that then I would get a LRF with built in ballistics before a scope like the Revic.Any other comments folks could add?
I didn’t know you were selling these Doug, I thought they were only through REVIC but glad to know you do. Also, I think you meant the Razor Gen II 4.5-27x56 as the AMG is a different scope. If I were to build a purely competition scope I’d seriously think hard on the Revic, I think the HUD is fantastic for seeing everything right in the scope and not having to get out of position to verify, great also if you have a spotter calling targets and distances. I’m 50 and my eyes aren’t getting better, but outside of competition a 3lb scope does not have much appeal to me.We've sold a few. It's a finer made, better quality controlled, higher end version of a Vortex AMG
I didn’t know you were selling these Doug, I thought they were only through REVIC but glad to know you do. Also, I think you meant the Razor Gen II 4.5-27x56 as the AMG is a different scope. If I were to build a purely competition scope I’d seriously think hard on the Revic, I think the HUD is fantastic for seeing everything right in the scope and not having to get out of position to verify, great also if you have a spotter calling targets and distances. I’m 50 and my eyes aren’t getting better, but outside of competition a 3lb scope does not have much appeal to me.
I’m surprised there aren’t more responses because I know there’s a number of Hider’s who shoot them.
I do agree with hk dave, what were they thinking with that mil reticle, I’d almost want a plain duplex rather than that crazy thing, hopefully they’ll come out with a better reticle for the mil crowd.
That was brilliant, really appreciate all the thought that went into this response, I am saving this hoping one day I will build a purely competition rifle as I think the Revic would be ideal for that.So, I got my Revic out to the range yesterday. My initial feeling is....
Impressed.
The scope itself is like many have said, a near duplicate of a Gen II Razor (I have two of those). But the differences are what set it above many other scopes.
Turrets: I love how they zero (like, why doesn't everyone have this same set up?). Easy, no nonsense process. Turn the turrets to get your POI/POA to match, then lock the turrets down. Unlock the drum from the turret via the sliding (rotationally) plate on top of the turret, move the turrets back to read "0", and then lock the drum to the turret. Easy peasy, no fuss, no muss.
Loading profiles via the Revic app. Uh...bone stupid simple and quick. None of this confusion that comes with a Kestrel app (truncated names, weird changing variables, etc.). Takes all of about 5-10 seconds.
Setting Profile to Zero: This is the one area where it is a little confusing. Essentially, after zeroing the rifle, the profile needs to be set tot he zeroing conditions (environmentals, distance and angle) so that the ballistic curve matches. There were two ways, and they both were a little confusing (requires the user to put the scope on zeroing target and then calibrate it so that range and inclination can be locked into the zeroing parameters). But after attempting it a couple of times, the first method seemed to finally take. Took about 5 mins to get it right.
Once set, it was pretty much fire and forget out to 675 yds. I don't know if it was the cartridge I was shooting (factory 224 Valkyrie AE 75 gr ammo) or what, but it tracked like a mammer-jammer until about 750yds. After that it was impacting low for some reason. I suspect the given BC for the crappy little 75gr FMJ is off (it sure is stubby for a 75gr bullet). That being said, just using a LOS reading (not ARC compensating) from the LRF was getting me first round impacts on some 1/2 MOA targets out to 750yds.
The HUD: It's awesome. Windage call, elevation/range reading, temp, baro...it was all visible at a glance. The built in level (I felt) was done right; as in the level bar lights up bright when leveled, and opaque (with the arrow to one side or the other) when not. No need to stare at it, just focus on the reticle/target, and see the brightness in the peripheral vision as it hits level. I really like it.
Reticle: This was a MIL version, so I was a bit apprehensive on the busy reticle. It ended up being a non-issue, since when dialing for elevation, all the busy'ness is down below, and I just held off for wind. I really like the floating dot in the center... a lot.
Illumination: Holy snikeys, talk about options. Four different colors are available for illumination (Blue, Green, Red and Yellow). Now here's the kicker...it's automatic. I found out early yesterday morning while in the garage loading a profile. The garage opener light was the only one on, and in my act of loading syncing a profile, I hadn't moved much, so the light went out (motion sensor activated). Before I could look up (I was looking through the scope, dorking with the menu), the reticle lit up. Nice. A well thought out function that employs quickly, and without thought.
Buttonology: Pretty straight forward, but takes a little repetition to get it down to a smooth tactile interface (without looking at the buttons themselves). Menu layout makes sense mostly (kind of similar to a Windows "ribbon bar" approach; scroll across, then down to access functions/settings).
Summary: I'm impressed. I was a bit hesitant when ordering this scope (spent about the last year hemming and hawing over it), but am very happy now that I have had a chance to get it mounted, configured and out on the range. Is it perfect for a PRS style match? I'm not sure yet, as I haven't tried it yet under time, with multiple engagements at multiple ranges. For a hunting rig though...I think they hit it out of the park. Just going from random targets on our local range (out to 1/2 mile, and in high relief/elevation/angles) it tracked as advertised, and the ballistic curve was spot on for LOS LRF ranges. I can definitely say this scope will be on my prairie dog rifle and/or deer hunting rifle this fall.
I'll be curious to see how it all functions when an LRF API is integrated (the one thing I wish it did right now), though I'm unsure how that will affect battery life, since BT (even BTLE) is going to eat some batteries if not done/coded correctly.
If this scope is the boiler plate for future capabilities/functions, I think Gunwerks/Revic have a solid platform to do it. The ease of use (minus the zeroing calibration) were obviously designed with that in mind. It really (I think) followed the Steve Jobs mindset; start with the user experience and work back from there. Overall I am more than happy with the purchase of this scope, and am eagerly waiting to see what else may be added to it via firmware updates and such.
At any rate, I hope this brief amateur review helps some...
Ok I think I am going to buy one tonight. Any idea which spuhr mount I should get? Placing on an impact action with m24 barrel (has 29 moa built in) any idea on height and if I should get 0, 10 or 20 moa mount. Shooting 6.5 creedmoor would like to be able to dial out to 1700 but most common is gonna be 2-600 m. I don’t want to be too far off and make image worse by getting to much of an angle.That was brilliant, really appreciate all the thought that went into this response, I am saving this hoping one day I will build a purely competition rifle as I think the Revic would be ideal for that.
Ty vmI'd venture a guess of 1.35" or taller.
Well it finally arrived I ended up getting the spuhr 4001 and fits great.Ty vm
Well it finally arrived I ended up getting the spuhr 4001 and fits great.
Well I also have a Burris Eliminator 3 which has a built in lrf and shows a holdover.... no comparison. I haven’t used it at least all since getting the Revic. I really don’t think there is a need for lrf in the Revic, certainly not for hunting. I don’t see the utility of using the rifle scope for lazing an animal. I think that is much better done with the binocs. Pointing a rifle at something to see how far away it is just makes my safety bone ache a bit. Maybe the situation is different for prs if there is no chance of sweeping something you don’t really want to shoot. I don’t play that game so am not familiar with those conditions.All they need to do is find away to put a range finder inside some how. I bet that will be in the next 3-5 years or sooner
Do you have a zero offset in your profile?Had an issue getting the zero to set yesterday. Even with it pointed at the target it kept setting itself to 108yds(?). Scratching my head over this (even after resetting HUD zero, before calibrating the zero in the VBDC mode). Compass wasn't calibrated, but that shouldn't have an effect on zero.
Will have to call Gunwerks today to get it sorted...
Had an issue getting the zero to set yesterday. Even with it pointed at the target it kept setting itself to 108yds(?). Scratching my head over this (even after resetting HUD zero, before calibrating the zero in the VBDC mode). Compass wasn't calibrated, but that shouldn't have an effect on zero.
Will have to call Gunwerks today to get it sorted...
Did you update the scope? Also I wonder if there is a drastic temp switch between sight in zero and when you shoot as your zero may say something like less than 116 etc. let me know what Gunwerks says. First time shooting it today and was so quick just turning that dial to the range u needed.I had this issue twice. Once I had a zero offset, the other time I had previously dialed in an 18 mph wind and forgot to reset that ?. I have noticed that some changes made in the scope don’t seem to take effect unless I cycle power, but can’t recall the exact circumstances. I’ll be interested to know what you learn from the folks at Revic. Mitch has been very responsive and helpful when I have contacted him . Please update.
Yes, my scope is updated and the update was great. So much more can be done from the scope now. Not sure what is going on with MARINEPMI’s scope but hope to learn something when he updates the thread. As of this point I am all good.Did you update the scope? Also I wonder if there is a drastic temp switch between sight in zero and when you shoot as your zero may say something like less than 116 etc. let me know what Gunwerks says. First time shooting it today and was so quick just turning that dial to the range u needed.
It is done via the Revic Ops app. My guess is that if you recently acquired your scope it has already been updated, but if so you will find out when you start the update process. Are you using an iPhone/iPad or an Android device to upload your rifle/ammo profiles? If Apple, I can help, but I don’t have any Android gear.How do you update the scope?
First, be sure you have the latest version of the Revic Ops app. Then, to check your scope firmware open the app and establish the bluetooth connection just as you do when uploading a profile. Then from the main screen (what you see when you first start the Revic Ops app) look in the upper left corner for the 3 horizontal bars and tap that symbol. You will see a menu that includes the item “check for updates.” Select that item and from there follow the directions. Hope this helps. Did you learn anything from the folks at Gunwerks?I recently (past few weeks) got my scope. I use an iPhone, so assume that it automatically updates the scope (if needed) when it pairs to the scope(?).
Wow, serious business. Good luck with the surgery. Sending some positive thoughts and prayers your way.I got tied up yesterday with stuff (brain surgery scheduled next week; had a final pre-surgery appointment yesterday), so haven't called them yet. I'll likely give them a ring today.
Thanks for the pointer on checking for updates. I'll have to do that (first) as well.
Yes, I agree and have let them know about the manual. It is very incomplete and out of date. Some illustrations/photos and/or videos would be really helpful.Okay, just updated the scope to FW v3.02 (not sure what it was sitting at before the update; I just figured out how to tell what firmware is loaded). The "User Manual" pages could use some work...
Thanks for the update. That all makes sense. I too have had good data from the scope. Have only had one day to shoot at 1000, but had horrendous variable gusty conditions with hills around and couldn’t even hit the ground ?, at least never saw any splash. But managed to get right on at 900 before the front blew in. Best wishes my friend. Hope you are soon out smacking the steel again.Okay, just got off the phone with Gunwerks, and apparently the 108yd "HUD Zero" is kind of normal. It has something to do with the encoder (what reads the turrets) and the difference in between clicks vs. ballistics(?). So, to be exact (with the incoming environmentals) it puts the exact distance (ballistically) of the turrets' settings. This ensures that what is shown at distance is the most accurate, while the closer distances (which are still exact) account for the minimal impact it'll have on your "zero". It makes sense if you think about it; the curve is being calculated and matched to the turrets (at distance apparently) and the rounding error of the turret clicks is displayed (accurately ballistically) where it matters least.
It would be interesting to understand where (at distance) the curve is being "pinned" that causes the curve to be back plotted to your zero that gives the slight variation in "zeroing distance".
Perhaps they'll have the engineer respond to this thread (I told them there's a thread discussion here going on about it).
As much as it doesn't seem to make sense at first glance, I'll say, the thing tracked to distance for me with the new bullet profile (out to 885, on a 4" spinner).