I'm in the market for a Premier Heritage 5-25X56 and would like to know what ring height I need to mount on a R700 with Seekins Base with a MTU contour barrel. I'm thinking of going with Badger rings.
Rifle Scopes Ring Height for PH 5-25x56
- Thread starter crazedone2
- Start date
Re: Ring Height for PH 5-25x56
I have a set of high Badgers on mine and they clear a M40 contour just fine. With the MTU, it would be close.
I have a set of high Badgers on mine and they clear a M40 contour just fine. With the MTU, it would be close.
Re: Ring Height for PH 5-25x56
Might want to get a set of highs and extra highs and try them both. Set the highes on the rail and rest the scope in the bottom saddles of the rings. Adjust for your eye relief and if the highs work just return the extra highs. If the bell hits with the highs you know the extra highes will work and send back the highs. If you dont mind buying both at first, just return the ones that you don't need.
Trevor B
OpticsPlanet
Might want to get a set of highs and extra highs and try them both. Set the highes on the rail and rest the scope in the bottom saddles of the rings. Adjust for your eye relief and if the highs work just return the extra highs. If the bell hits with the highs you know the extra highes will work and send back the highs. If you dont mind buying both at first, just return the ones that you don't need.
Trevor B
OpticsPlanet
Re: Ring Height for PH 5-25x56
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: crazedone2</div><div class="ubbcode-body">I'm in the market for a Premier Heritage 5-25X56 and would like to know what ring height I need to mount on a R700 with Seekins Base with a MTU contour barrel. I'm thinking of going with Badger rings. </div></div>
depending on the height of the base, 1 to 1.125 inch optical center line, contact me with the height of the base and i can tell you.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: crazedone2</div><div class="ubbcode-body">I'm in the market for a Premier Heritage 5-25X56 and would like to know what ring height I need to mount on a R700 with Seekins Base with a MTU contour barrel. I'm thinking of going with Badger rings. </div></div>
depending on the height of the base, 1 to 1.125 inch optical center line, contact me with the height of the base and i can tell you.
