Ruger precision magazine issue

[Blue X]

I installed a Krigger barrel and did some load development for a Ruger precision rifle and my magazine is to short to load to .020 off the lands.
The stock magazine is to short to load CBTO. Im about .050 off the lands when i load to use the factory magpul magazine.

What magazine will fit in a gen 3 rpr in 6.5 creedmoor?

This may be the wrong place for my question. I figured somebody reloading would have run into this issue.
Thank you for your time.
Blue X

 

[sierra2]

The RPR is unique in that it will use both the LR308 “AR” style mags (the 10 rounders that came with it) and the AICS-style mags. A quick glance at MidwayUSA shows the Magpuls are advertised for cartridges 2.820” or shorter whereas AICS metal mags will give you up to 2.880”.

 

[Doc68]

I use the Magpul AICS pattern mags. feed very smoothly and I have never been able to seat any bullets for my 6.5 creed, 6 creed out too far. Now working on a 7mm-08 with 162-175gr bullets.

 

[ditter]

I have the RPR and i bought the Magpul P-Mag AC, which holds a longer cartridge.