Up for sale is a Remington 721 action I had RW Snyder do a complete build on. This rifle was completed in Sept. 2017 and has had a whopping 225 rounds thru it. As expected from RWS - It's a hammer.
Specs are:
- Remington 721 action - trued, Lawton side bolt release installed, machined for R700 safety, drilled/tapped for 8-40 screws
- Bolt - face opened to Magnum boltface, Badger M16 extractor installed, Badger Ordnance 306-31 bolt knob installed
- Barrel - 26.5" Krieger 1:10" 4-groove heavy Palma, fluted and profiled for Ops Inc 3rd Model with thread protector
- Recoil Lug - NSWC Crane "Clements" MK13 lug with bedding screw
- Stock - Manners T4A Desert DPM, Anschutz accessory rail, swivel cups installed both sides front, left and bottom buttstock
- Bipod mount - BT28 AFAR
- DBM - Accurate CIP-length (accepts AICS-style 3.850" magazines, 4 of which are included)
- Trigger - Geissele Super 700 2-stage (UNOBTANIUM) set at 12oz 1st stage, 1# 10oz 2nd Stage
- Scope mount -Nightforce A138 35moa steel, 8-40 screws
- All the metal is coated in OD Green KG GunKote
Pelican Storm iM3300 case with foam cut for this rifle.
$2,500 shipped CONUS - SPF
The bipod and Kahles K525i with ARC rings are not included but I will sell to the buyer the scope/rings (SKMR3 LSW CCW with box, Tenabraex caps & Switchview) and the BT65-LW17 CAL bipod.
$5000 for the package.
I can include the Ops Inc 3rd Model can with the Tab Gear cover (in PA on a Form 4) for an additional $400 and I will pay 1 of the stamps to transfer (if you're in PA, that means you get the can for $400 and pay no stamp).
No trades considered.
Specs are:
- Remington 721 action - trued, Lawton side bolt release installed, machined for R700 safety, drilled/tapped for 8-40 screws
- Bolt - face opened to Magnum boltface, Badger M16 extractor installed, Badger Ordnance 306-31 bolt knob installed
- Barrel - 26.5" Krieger 1:10" 4-groove heavy Palma, fluted and profiled for Ops Inc 3rd Model with thread protector
- Recoil Lug - NSWC Crane "Clements" MK13 lug with bedding screw
- Stock - Manners T4A Desert DPM, Anschutz accessory rail, swivel cups installed both sides front, left and bottom buttstock
- Bipod mount - BT28 AFAR
- DBM - Accurate CIP-length (accepts AICS-style 3.850" magazines, 4 of which are included)
- Trigger - Geissele Super 700 2-stage (UNOBTANIUM) set at 12oz 1st stage, 1# 10oz 2nd Stage
- Scope mount -Nightforce A138 35moa steel, 8-40 screws
- All the metal is coated in OD Green KG GunKote
Pelican Storm iM3300 case with foam cut for this rifle.
$2,500 shipped CONUS - SPF
The bipod and Kahles K525i with ARC rings are not included but I will sell to the buyer the scope/rings (SKMR3 LSW CCW with box, Tenabraex caps & Switchview) and the BT65-LW17 CAL bipod.
$5000 for the package.
No trades considered.
Last edited:
