RWS GUNSMITHING BUILDS AND CUSTOMER PICTURES Part 2

[RWSGunsmithing]

6.5 saum in a McMillan XTR stock with Proof barrel. weighs 9.5 lbs

 

[RWSGunsmithing]

Just finished this guy up.

 

[RWSGunsmithing]

Late Mk13 Mod 0 rifle build using a original military McMillan stock.

This rifle is also currently up for sale on my website.

 

[RWSGunsmithing]

A couple of pictures I just received from Iamero











**

 

[RWSGunsmithing]

30-378 Wby built on a surgeon XL action. Weighs 28 lbs

 

[RWSGunsmithing]

Finished this guy awhile ago and just received a few pictures from the owner. Rifle is chambered in 6.5/06.

 

[RWSGunsmithing]

A bigger rifle 24.6 lbs using a surgeon XL action and JAE stock.

 

[Precision Underground]

This thread reallly needs a 300 Norma in an APO Mod-1.

 

[RWSGunsmithing]

Another big gun built but this one is on my Sharpshooter action chambered in 6.5-300 wby





**

 

[Precision Underground]

300 Norma Mag barreled action done by RWS. 700 ultra mag action/PTG 1 piece/ rock creek 9 twist. RWS was helpful with all of my questions as I decided what I wanted. Only a few rounds down range to start breaking her in but it looks very good so far! I'll update once I do some load development.

 

[RWSGunsmithing]

6.5 creedmoor in a McMillan A5 stock

 

[Whiplash6.5]

Rem 700 6.5 Creedmoor barreled action that Robert spun for me about a year ago. Here is a three shot group at 600 yards!

 

[Dirty D]

This is what you get when you pay Robert to pillar bed your rifle, thank you sir.

 

[Dirty D]

More products of Roberts pillar bedding skills.

 

[Dirty D]

Any rifle has the potential to make a group like I posted above, only a properly bedded rifle will do it consistently even with different charge weights while ladder testing. The man knows how to bed a rifle.

 

[Dirty D]

 

[RWSGunsmithing]

Just finished putting this guy together for a buddy. 300 win mag , Leupold mk4 8.5-25 scope. came in at 14.2 lbs without suppressor. A quick 3 shot group at 100yds after a 10 round break in.

 

[RWSGunsmithing]

M40A5 clone.

 

[RWSGunsmithing]

A little mk12 love.

 

[RWSGunsmithing]

Mk13 mod 0 on a original return stock.

 

[RWSGunsmithing]

Mk13 Mod 2

 

[RWSGunsmithing]

Premier long range rifle in 338 lapua.

 

[RWSGunsmithing]

338 norma mag in a manners folding stock with a rem varmint contour barrel came in at 11.10 lbs

 

[RWSGunsmithing]

6.5 creedmoor with rem varmint contour , 26" barrel came in at 9 lbs 12 oz

 

[RWSGunsmithing]

Remington XM110 clone rifle.

 

[RWSGunsmithing]

Just finished up a customers Mk13 Mod 5

 

[RWSGunsmithing]

Mk13 Mod 5 barreled action for a customer.

 

[RWSGunsmithing]

Mk13 Mod 5ish build. Rem 700 s/a chambered in 6.5 creedmoor.

 

[RWSGunsmithing]

Mounted a new scope on the shop MK13 Mod 5 rifle and sighted it in. Shot a quick 3 shot group at 100 yds. Defiantly likes the 220gr Atomic Ammunition

 

[RWSGunsmithing]

Been doing a few mk13's lately.

Mk13 mod 7

 

[RWSGunsmithing]

Different kind of set up . Rem 700 action chambered in 450 Bushmaster setting in a AIAX chassis

 

[RWSGunsmithing]

Tactical 2 mile rifle. Weighs 36 lbs chambered in 416 barrett

 

[RWSGunsmithing]

375 cheytac in a Cadex chassis. Barreled action is cerakoted Tungsten Gray, 34" barrel. Weighs 23lbs

 

[RWSGunsmithing]

A bit of a different build. Started with a Winchester 54 in 30-30 and rebarreled it to 375 Winchester, Made a custom stock for it and threaded it for a suppressor.

 

[RWSGunsmithing]

Another Mk13 mod 7 build.

 

[RWSGunsmithing]

Did another 375 winchester earlier in the year for the same customer but we used Remington 788 that was chambered in 30-30 and installed a new stock. This gun has already taken a couple of deer.









**

 

[RWSGunsmithing]

**

 

[RWSGunsmithing]

Finally had a little free time to finish up the Shops Mk13 Mod 0 rifle. Using an original/return MK13 stock, BDL and scope base.




**

 

[RWSGunsmithing]

A couple of Mk13 builds.









**

 

[RWSGunsmithing]

Freedom!





**

 

[RWSGunsmithing]

Nice little 16.5" 223 base custom rifle. Came in at 9lbs 12oz

 

[RWSGunsmithing]

Base custom rifle in a McMillan game hunter stock 7.7lbs

 

[RWSGunsmithing]

Pair of rifles for the King of 2 mile in Argentina.

 

[RWSGunsmithing]

One of a few Mk13 Mod 7 s in the works here at the shop.

 

[RWSGunsmithing]

Mk13 Mod 0

 

[MR. MRAD]

Had Robert rebarrel a R700 300WM to a 7SAUM. True/blueprint R700 LA Rebarrel, side-bolt release install, thread muzzle 5/8x24, enlarge and true rail mount screws to 8-40, helical flute bolt, open feed ramp/rails. Bartlein 8 twist 26", thread bolt handle/install bolt knob. Barreled action sitting in a Grayboe Renegade with Grayboe bottom metal, Area 419 20moa rail, timney calvin elite tigger, american rifle company rings, bushnell xrs2 4.5-30. I will be back to RW Snyder gunsmithing for more. Shooting sub-moa out to 1570yds. Will try to get some pictures uploaded.

 

[RWSGunsmithing]

300 PRC in a AIAX chassis.

 

[RWSGunsmithing]

Mk13 Mod 0ish build for a customer. Built on an original return Mk13 stock.

 

[RWSGunsmithing]

Finished this up for a customer. Titanium action, Proof carbon barrel, Manners t4a elite stock in Swamp camo. Came in at 7 lbs 11 oz

 

[RWSGunsmithing]

This guy is currently up for sale.

Mk13 Mod 5 sniper rifle clone. Built on a original return military stock. Receiver is a stiller. Correct Lilja profiled barrel with a 1-10 twist. Now I decided to try and replicate the markings as close to what the original had with hand stamped caliber and my label is at the bottom of the barrel so it isn’t visible when the barreled action is in the stock. Will ship in an ORIGINAL Mk13 Mod 5 case! Even though this is basically a brand new gun the stock and the case will obviously show signs of use, after all they are original military issue!