Shooters,
Just showing some pictures of a .22-250 that we just finished up for a customer. We did not hold anything back on this rifle and it shoots as great as it looks with 80 Gr SMK's and 75 A-MAX's at 3100 fps.
We started by barreling up this rifle with our 22-250 reamer, cutting to length, crowning and threading 5/8 x 24 with custom thread protector. We then fitted the barreled action into the stock and cleaned up all the lines, filled everything in, then fit it back down. The bedding turned out great! We then fitted the EFR, broke the barrel in, and sent it off to get Melonited. A great thing about Melonite is the prevention of galling on the lugs and muzzle threads in addition to the extended barrel life. The customer plans on installing a TNVC WASP when they are available.
Specifications
Short Action Customs Alpha 11 action, 20 MOA base, double pinned lug. APA bolt knob, AW Mag well.
Bartlein M40, 224 bore, 5R Gain twist 7.5-6.5" finished at 24"
5/8 x 24 tpi with custom thread protector.
Melonite on all metal.
Badger M5 DBM.
Timney 510U set to 2.5 lbs.
Manners MCS-TF2 stock.
Mark










Just showing some pictures of a .22-250 that we just finished up for a customer. We did not hold anything back on this rifle and it shoots as great as it looks with 80 Gr SMK's and 75 A-MAX's at 3100 fps.
We started by barreling up this rifle with our 22-250 reamer, cutting to length, crowning and threading 5/8 x 24 with custom thread protector. We then fitted the barreled action into the stock and cleaned up all the lines, filled everything in, then fit it back down. The bedding turned out great! We then fitted the EFR, broke the barrel in, and sent it off to get Melonited. A great thing about Melonite is the prevention of galling on the lugs and muzzle threads in addition to the extended barrel life. The customer plans on installing a TNVC WASP when they are available.
Specifications
Short Action Customs Alpha 11 action, 20 MOA base, double pinned lug. APA bolt knob, AW Mag well.
Bartlein M40, 224 bore, 5R Gain twist 7.5-6.5" finished at 24"
5/8 x 24 tpi with custom thread protector.
Melonite on all metal.
Badger M5 DBM.
Timney 510U set to 2.5 lbs.
Manners MCS-TF2 stock.
Mark










Last edited: