Sako trg arca rail
- Thread starter Cmiller5
- Start date
KRG forends can be adapted to the TRG, but its a good bit of work and machining to get them to fit. I'm currently running this https://kineticresearchgroup.com/product/arca-forend/ on mine with a custom arca spigot in front of it to get alot of arca.
Try to get your hands on a Vision front section for your rifle. Its a great product, which they stopped making, but some should be around somewhere.
Has anyone tried one of these kits? Says it includes hardware looks like my trg22 has 8” to be even with front of stock
I tried something similar just to mount my rifle to my tripod wich has an Arca clamp head. It worked for that but if you put a bipod on it, the balance and COG will probably be weird. As it will be way too tall in my oppinion. The Vision frontsection is as flat as it can possibly get since it runs snug up to the main beam of the TRG chassis. So depending on what you are after, the choice should be given.
Has anyone tried one of these kits? Says it includes hardware looks like my trg22 has 8” to be even with front of stock
Absolutely, its a great piece of kit.
Been running KRG gear since 2015 and Ive yet to be let down.
I’ve made a few accessories for it out of aluminum that have yet to be cerakoted. But it is krg from and rear on the sako beam.
You can buy any universal arca rail and these should be the correct pieces to fit in the rail. Double check the measurements to make sure these are correct for the slot in the forearm.
www.accu-shot.com
BT28-N: AFAR Rail Nuts - B&T Industries, L.L.C.
The BT28-N AFAR Rail Nuts are the same nuts used with the BT28 AFAR Rail Kit. They are 1040 Alloy Steel fasteners. The uniquely designed rectangle nuts fit both Freeland and Anschutz style rails by rotating them 90°. Sold as a pair. Weight: 0.22 ounces
www.accu-shot.com
Similar threads
