Savage 110FCP 338LM, almost done/first outing

Re: Savage 110FCP, Almost done (need cheek piece)

Just a note, Snipedogg and I have both compared powder in the Factory 300gr Scenar ammo to N170 and N570. It appears Lapua is using a proprietary powder for their factory ammo, not uncommon.
 
Re: Savage 110FCP 338LM, almost done/first outing

Snipedog - can you post your N570 recipe?

Note to anyone looking at this powder, the granuals are HUGE, and it is VERY difficult to get any consistency in thrown charges. (not that anyone wouldn't individually weigh.)
Also due to the large granuals, I have had flow issues, and had to purchase an extended drop tube for my redding powder measure.
 
Re: Savage 110FCP 338LM, almost done/first outing

Thanks Sully, I just received a package from Bruno Shooting Supply. Couple lbs of N570 and a bunch of 300gr Scenars. Its nice to hear about good results from those components.

 
Re: Savage 110FCP 338LM, almost done/first outing

dstewart51,just picked up one these guns too.Put a hawke sidewinder 30 scope and bi-pod,plan on getting one of savages cheek rest too.Right now I am shootting hornaday 250 grain,300 grain was jamming bolt.Do not have the means to reload yet.Hope to reload in the near future.Check out brownells.com for your bolt,they have some nice ones on that sight,a little bit longer than stock(100-002-200)&(855-000-269)stock numbers on there web sight.They come in ss or blue.Any info on bullet weight and powder would be helpfull when I start to reload.Happy shooting TINK58
 
Re: Savage 110FCP 338LM, almost done/first outing

I did a ladder test on my FCP and it likes 88.5gr of H-1000 with CCI primer, Lapua brass, and Berger 300gr bullet loaded out to 3.700". It's sub moa.
 
Re: Savage 110FCP, Almost done (need cheek piece)

gees had to get in on this too- here are my two babies and well i been shooting svages for 30 years. here they are:

110ba & 10bas/k or 10ba as its called now
P3294201.jpg


my 10le with new 6.5 creedmoor e.r. shaw barrel
P9084690.jpg

oh also my 110ba loves 92 grains h1000 and sierra 300 bthp
vag's 2750fps
 
Re: Savage 110FCP, Almost done (need cheek piece)

I have tried so many times to shrink the 5 shot groups at 100y but the best it could do is .82" The rest I've got was a 1-1.5" @ 100y. Anybody out there have a recipe that can make this rifle shot a 5 shot group half an MOA at 100y?
 
Re: Savage 110FCP 338LM, almost done/first outing

Just received my 338 and was wondering if someone could post up the gap in between the muzzle break and barrel. Mine seems rather excessive. My muzzle has tool marks on it, supposedly brand new from grabagun ><
 
Re: Savage 110FCP 338LM, almost done/first outing

After many tests, Ive settled on 89gr Retumbo behind 300gr Scenar's, 215M Primer, .015" off the lands. Very good results out to 1900 yards and it doesn't kill the brass after 2 or 3 reloads.
 
Re: Savage 110FCP 338LM, almost done/first outing

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dstewart51</div><div class="ubbcode-body">After many tests, Ive settled on 89gr Retumbo behind 300gr Scenar's, 215M Primer, .015" off the lands. Very good results out to 1900 yards and it doesn't kill the brass after 2 or 3 reloads. </div></div>

I have nothing to ad but WOW!!