Savage LRP (.260): Ring height question.

[Little Yoshi]

I have an LRP in .260 and a NightForce 5.5-22X50 NXS. Thinking about getting the "EGW HD Picatinny Rail 1 Piece Scope Mount" and slapping a pair of badgers on it. Should I go with the .823 or the .885 rings?

 

[mnhntr]

Re: Savage LRP (.260): Ring height question.

not sure if this will help you but I used a Warne 20 moa base and (low) Burris Tactical Extreme rings for a 40mm objective

 

[InTraining]

Re: Savage LRP (.260): Ring height question.

This may not help either, I had the Savage Model 12 F Class, barrel contour similar to the LRP,and needed Badger Ordnance medium highs 1". Scope was NF 56mm and not much room between the barrel and the scope. Good luck.

DV

 

[Paulyr450]

Re: Savage LRP (.260): Ring height question.

I have the same gun with the egw 20 moa rail and a vortex viper pst. The objective is 56 mm and i used egw low rings which are .850. It gave me about a quarter inch from barrel to scope. I hope that helps.

 

[Little Yoshi]

Re: Savage LRP (.260): Ring height question.

Thanks all! Much appreciated.