My dad has a duel port LRPV single shot and does not like the HS Precision stock that came on it. Will any of the Bell and Carlson stocks fit with minimal work?
Savage LRPV Aftermarket Stock
- Thread starter Nosler243Shooter
- Start date
Re: Savage LRPV Aftermarket Stock
I do believe that these will fit any 4.4 inch action screw stock. Obviously you will not be using 3 screws but it doesn't really matter. So go ahead and get a XLR or PDC chassis, or basically any of the major stock manufacturers stocks. IE. McMillan, Manners, B&C, etc.
I do believe that these will fit any 4.4 inch action screw stock. Obviously you will not be using 3 screws but it doesn't really matter. So go ahead and get a XLR or PDC chassis, or basically any of the major stock manufacturers stocks. IE. McMillan, Manners, B&C, etc.
Re: Savage LRPV Aftermarket Stock
Unfortunately, the stock has 4 screws.
What are the options now?
Unfortunately, the stock has 4 screws.
Re: Savage LRPV Aftermarket Stock
You need to measure the centers between the front trigger-guard screw, and the one furthest away. The one in-between is the one that will have to be drilled out, if wanted.
You need to measure the centers between the front trigger-guard screw, and the one furthest away. The one in-between is the one that will have to be drilled out, if wanted.
Re: Savage LRPV Aftermarket Stock
XLR, are you saying he doesn't have to use the center screw. If so, will that not throw the accuracy off on the rifle without it or will two screws be enough?
XLR, are you saying he doesn't have to use the center screw. If so, will that not throw the accuracy off on the rifle without it or will two screws be enough?
Re: Savage LRPV Aftermarket Stock
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: XLR</div><div class="ubbcode-body">We do build a chassis for the 3 screw Savage Target action (or LRPV). That being said, your rifle can also be used with any 4.41 stock you would just not use the middle screw. (or make provisions for one)
-Kyle ~ XLR </div></div>
One day I will have this chasis. I love that XLR, everybody where I am has AIC and I hate em. I have got to get behind one.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: XLR</div><div class="ubbcode-body">We do build a chassis for the 3 screw Savage Target action (or LRPV). That being said, your rifle can also be used with any 4.41 stock you would just not use the middle screw. (or make provisions for one)
-Kyle ~ XLR </div></div>
One day I will have this chasis. I love that XLR, everybody where I am has AIC and I hate em. I have got to get behind one.
Re: Savage LRPV Aftermarket Stock
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 243Varminter</div><div class="ubbcode-body">XLR, are you saying he doesn't have to use the center screw. If so, will that not throw the accuracy off on the rifle without it or will two screws be enough? </div></div>
It will not throw off the accuracy. 2 screws are all that are needed. Many people build off the target actions and most use just 2 screws.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 243Varminter</div><div class="ubbcode-body">XLR, are you saying he doesn't have to use the center screw. If so, will that not throw the accuracy off on the rifle without it or will two screws be enough? </div></div>
It will not throw off the accuracy. 2 screws are all that are needed. Many people build off the target actions and most use just 2 screws.
Re: Savage LRPV Aftermarket Stock
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JWV</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 243Varminter</div><div class="ubbcode-body">XLR, are you saying he doesn't have to use the center screw. If so, will that not throw the accuracy off on the rifle without it or will two screws be enough? </div></div>
It will not throw off the accuracy. 2 screws are all that are needed. Many people build off the target actions and most use just 2 screws.</div></div>
this...
this is my duel port LRPV in a choate tac-folder..
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JWV</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 243Varminter</div><div class="ubbcode-body">XLR, are you saying he doesn't have to use the center screw. If so, will that not throw the accuracy off on the rifle without it or will two screws be enough? </div></div>
It will not throw off the accuracy. 2 screws are all that are needed. Many people build off the target actions and most use just 2 screws.</div></div>
this...
this is my duel port LRPV in a choate tac-folder..
Re: Savage LRPV Aftermarket Stock
This is great news. My dad will be very pleased. He would never buy a McMillan or Manners because of cost but he might buy another B&C. Thanks for all the help.
This is great news. My dad will be very pleased. He would never buy a McMillan or Manners because of cost but he might buy another B&C. Thanks for all the help.
