I have a savage 10 S-BA 6.5 creedmoor barreled action that is fitted into a stealth chassis. I'm using Magpul AICS magazines.
The issue I'm having is when the magazine is empty and I go to single feed through the ejection port the bullet jams between the barrel and the bolt face. The bullet and neck of the case don't touch the feed ramp at all. The tip of the bullet hits the back of the barrel just below the chamber and won't ride up into the chamber. I'm wondering if the issue is from the Magpul mags and before I spend lots of money on metal mags I was wondering if anyone had any first hand experience.
As a side note the mdt plastic mag that comes with the stealth does the same thing as the magpul mag.
Thanks for any help.
The issue I'm having is when the magazine is empty and I go to single feed through the ejection port the bullet jams between the barrel and the bolt face. The bullet and neck of the case don't touch the feed ramp at all. The tip of the bullet hits the back of the barrel just below the chamber and won't ride up into the chamber. I'm wondering if the issue is from the Magpul mags and before I spend lots of money on metal mags I was wondering if anyone had any first hand experience.
As a side note the mdt plastic mag that comes with the stealth does the same thing as the magpul mag.
Thanks for any help.