Scope Ring Height for 50mm Objective, and CZ-455

[sasquatch98226]

I just ordered my CZ-455 Tacticool so I can start the .22-PRS style matches at my club. Before I order the wrong rings, I thought I would ask, What height rings for a 50mm Objective. MY buddy has the same rifle, but a 40mm Objective, and has a 20moa base, and uses low Seekins rings, and says he still has room between the barrel and the scope. I plan on running the Area419 CZ Scope riser/rail. Should I go with the Lows or the Mediums, as the Are419 raises the whole apparatus?

 

[Rob01]

On my CZ with the DIP 20 MOA base I use a .92" high Seekins rings with my Vortex 6-24x50 PST.

 

[R.Markus]

Wondering that myself as I'm going to order the Area 419 base. Can't decide on the 15 or 30 MOA base, though.

 

[45cal4life]

I'm using Seekins 30mm low with a Murphy Precision 20moa base for a NXS 50mm

 

[bnanaphone]

Try using this scope ring height calculator from mil-rad. It was spot on for me with an SPR A1 and Gen II Razor.

 

[Tanman]

I have a Murphy Precision base with Seekins medium 30mm rings on a 4-16x PST. No cheek riser.

 

[R.Markus]

I just mounted the optic on mine with the Area 419 30 MOA base. It's a Vortex PST Gen II with a 50mm Objective lens and I used Seekins low rings ( .82) with good results. The bolt handle clears it better than I thought it would.

 

[Robby0931]

Area 419 15MOA Base with .87 Vortex Rings perfectly clears a 50mm objective.